12.07.2015 Views

100 mm

100 mm

100 mm

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Ex Signaling devicesLED multifunction lightQuadro-LED Flex-3G/3D• designed for tough requirements under industrial conditions• suitable for indoor and outdoor use• suitable for use in potentially explosive areas in Zones 2 and 22• extremely insensitive to shock and vibration• maintenance-free service life exceeding 50,000 hrs• internally and externally selectable operating mode as standard -one device for 4 different alarms:– continuous light– blinking light– fl ashing light– rotating light (non-wearing)• 24 V AC/DC devices as standard with soft-start moduler =5 mRange asper EN 54IP 66ProtectionsystemIK 08Impact-proofhousing+ 55 °C- 20 °COperatingtemperature• can be operated and powered directly via 24 V transistor PLC output,no additional relay control necessary• inexpensive and fl exible; wide range power supply as standardElectrical data Quadro-LED Flex 3G/3D ATEXRated voltage 115 V / 230 V AC 24 V AC/DCRated frequency 50 Hz / 60 Hz 50 Hz / 60 HzOperating rangeCurrent consumption incontinuous light modeAC 95 V – 253 V 15 V – 40 VDC10 V – 60 V60 mA 250 mAMechanical data Quadro-LED Flex 3G/3D ATEXII3G Ex nR II T5 X - 20 °C ≤ Ta ≤ + 55 °CExplosion protectionII3G Ex nR II T6 X - 20 °C ≤ Ta ≤ + 50 °CII3D IP66 T 85°C X - 20 °C ≤ Ta ≤ + 55 °CCategory (area of use)3G (Zone 2)3D (Zone 22)Conformity to standards Guideline 94/9/EG (ATEX <strong>100</strong>a)Testing bodyPfannenbergX: according to the requirements of prDIN EN 60 079-0, DIN EN 61241-0 (2007) and DIN EN 61241-1 (2005), theSpecial conditionsequipment is suitable for applications with a low degree of mechanical danger. It must therefore be ensured thatthe fl ashing light is mounted with suffi cient protection against impacts. A protective cage is not mandatory.Operating mode (internally andexternally selectable)continuous light blinking light fl ashing light rotating all-round lightLight alternation frequency 1.5 Hz 1 Hz 2.5 HzLight sourceLED; 8 x 2 LEDs (3 chip version)Light intensity (DIN 5037) clear lens 9 cdLens coloursOperating temperatureclear, white, yellow, amber, red, green, blue- 20 °C ... + 50 °C (T6) / - 20 °C ... + 55 °C (T5)Storage temperature - 40 °C ... + 70 °CRelative humidity <strong>100</strong> %Protection system according to EN 60529IP 66; mounting arbitraryImpact resistance as per EN 50102 IK 08Protection classDuty cycle <strong>100</strong> %Service life of light source min. 50 000 hrsMateriallensIIpolycarbonate (PC)housing polycarbonate (PC), light grey RAL 7035Connecting terminals cage clamp terminal 0.08 – 2.5 <strong>mm</strong> 2Cable entryWeight2 x M20 x 1.5 (1 x blanking plug, 1 x cable gland)500 g198www.pfannenberg.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!