100 mm

ELECTRO-TECHNOLOGY FOR INDUSTRYDimensions98PAB 100 PAB 10683Ø 6.3 868721383Ø 7.3 13087M20143132Alarm tone tableBasictoneStageDescription - tonesno.2 31 continuous tone 340 Hz 2 52 alternating tone 800 / 1000 Hz, alternation every 0.25 s 17 53 slow whoop 500-1000 Hz, 3 s signal, 0.5 s gap 2 54 sweeping 800 / 1000 Hz, switching frequency 1 Hz 6 55 continuous tone 2400 Hz 3 206 sweeping 2400 / 2900 Hz, switching frequency 7 Hz 7 57 sweeping 2400 / 2900 Hz, switching frequency 1 Hz 10 58 siren 500 / 1200 / 500 Hz, duration 3 s 2 59 sawtooth 1200 / 500 Hz within 1 s 15 210alternating tone 2400 / 2900 Hz,alternation every 0.25 s7 511 interrupted tone 1000 Hz, 0.5 s signal, 0.5 s gap 2 512 alternating tone 800 / 1000 Hz, alternation every 1.14 s 4 513 interrupted tone 2400 Hz, 0.5 s signal, 0.5 s gap 15 514 interrupted tone 800 Hz, 0.25 s signal, 1 s gap 4 515 continuous tone 800 Hz 2 516 interrupted tone 660 Hz, 150 ms signal, 150 ms gap 18 5Basictoneno.Description - tonesStage2 317alternating tone 544 Hz (100 ms) / 440 Hz (400 ms)(NF S 32-001)2 2718 interrupted tone 660 Hz, 1.8 s signal, 1.8 s gap 2 519sweeping 1400 Hz –1600 Hzrising 1 s, falling 0.5 s (NF C 48-265)2 520 continuous tone 660 Hz 2 521 alternating tone 554 / 440 Hz, alternation every 0.5 s 2 522 interrupted tone 660 Hz, 0.875 s signal, 0.875 s gap 2 523 800 Hz, 0.25 s signal, 0.25 s gap 6 524 sweeping 800 / 1000 Hz, switching frequency 50 Hz 29 525 sweeping 2400 / 2900 Hz, switching frequency 50 Hz 29 526 simulated bell 2 1527 continuous tone 554 Hz 26 528 continuous tone 440 Hz 2 529 sweeping 800 / 1000 Hz, switching frequency 7 Hz 7 530 continuous tone 300 Hz 2 531 siren 660 / 1200 Hz, switching frequency 1 Hz 26 532 2-tone bell sound 26 5Visual-audiblesignaling devicesTone selection via DIP switch. Two alternative tones (stage 2 and 3) can be generated by means of external control.Ordering detailsArticle numbers PAB 100 PAB 106Version Rated voltage 230 V AC 110 V AC 24 V DC 230 V AC 110 V AC 24 V DCyellow lens 230 50 10 3 000 230 50 16 3 000 230 50 80 3 000 230 56 10 3 000 230 56 16 3 000 230 56 80 3 000amber lens 230 50 10 4 000 230 50 16 4 000 230 50 80 4 000 230 56 10 4 000 230 56 16 4 000 230 56 80 4 000red lens 230 50 10 5 000 230 50 16 5 000 230 50 80 5 000 230 56 10 5 000 230 56 16 5 000 230 56 80 5 000yellow lens, UL 230 50 10 3 002 230 50 16 3 002 230 50 80 3 002 230 56 10 3 002 230 56 16 3 002 230 56 80 3 002amber lens, UL 230 50 10 4 002 230 50 16 4 002 230 50 80 4 002 230 56 10 4 002 230 56 16 4 002 230 56 80 4 002red lens, UL 230 50 10 5 002 230 50 16 5 002 230 50 80 5 002 230 56 10 5 002 230 56 16 5 002 230 56 80 5 002Article numbers for other voltages and versions on requestConformity to standardsThe acoustic parameters conform to the European standard DIN EN ISO 7731 ‘Ergonomic – alarm signals for public areas and workplaces – acoustic alarm signals’.The requirement for an acoustic alarm signal can be found in the harmonised standards:EN 60204-1Electrical equipment of machinesEN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837Further technical information can be found on our website at www.pfannenberg.com165