100 mm

Visual signaling devicesAll-round flashing lightsPMF 2015-M• extremely bright due to 14 Joules total fl ash energy of the impulsegroup and light bundling with fresnel lens, low power consumption(energy-saving)• the function of the flashing light is monitored internally via an opticalsensor and evaluation circuitry• both sub-systems (flashing light and monitoring unit) have separateoperating voltage connections• the light is extremely failure-tolerant and carries type approval from theSwiss Ministry of Transport• independent technical safety report within the definitions of EN 50129existsr =22 mRange asper EN 54IP 55Protectionsystem+ 55 °C- 30 °COperatingtemperatureElectrical data PMF 2015-MRated voltage24 V DCOperating range18 V – 30 VCurrentflashing light0.65 Aconsumptionmonitoring unit0.05 AAlarm contact contact version positively driven contact (1 x NC, 1 x NO)switching currentmax. 6 Aswitching voltagemax. 250 V ACmax. switching power (AC)1500 VArecommended minimumload> 50 mWMechanical data PMF 2015-MOperating modedouble fl ashLight sourcexenon fl ash tubeFlash frequency of the main flash1 Hz = 60 fl ashes/min.Flash energy of the main flash7 JoulesLight intensity (DIN 5037) clear lens 200 cdLens coloursclear, amber, red, green, blueLens typelens with fresnel characteristicBeam anglevertical approx. 16°horizontal 360°Operating temperature - 30 °C ... + 55 °CStorage temperature - 40 °C ... + 70 °CRelative humidity 90 %Protection system according to EN 60529IP 55 (vertical mounting)Duty cycle 100 %Service life of the flash tube light emission still 70 % after 8,000,000 fl ashesMateriallenspolycarbonate (PC)housingbracket mounting: polycarbonate (PC) / direct mounting: acrylonitrile butadiene styrene (ABS)Cable entry for bracket mounting M20 x 1.5 for cables 6.5 – 13.5 mmConnecting terminals 0.08 – 2.5 mm 2112www.pfannenberg.com