100 mm

ELECTRO-TECHNOLOGY FOR INDUSTRYDimensionsFault message contactM20 x 1.5 blanking plug113S113025Mounting screwe.g. 4 x M4 x 2013080M20 x 1.5cable connection115Additional mounting possible via external lugs (included).X1X2 alarm outputFunction-monitoredLightsDIP switch settingSetting for Quadro S-M-Flex4 3 2 1 Frequency (Hz) Flash energy (Joules)1 13ON 2 13ON 0.5 13ON ON 0.1 13ON 1 7.5ON ON 2 7.5ON ON 0.5 7.5ON ON ON 0.1 7.5ON 1.5 13ON ON 1.75 13ON ON 2.5 13ON ON ON 13ON ON 13ON ON ON 13ON ON ON repeating 7.5ON ON ON ON only one fl ash 13Ordering detailsArticle numbersQuadro S-M-FlexLens colour Rated voltage 230 V ACclear 210 42 10 1 179yellow 210 42 10 3 179amber 210 42 10 4 179red 210 42 10 5 179Article numbers for other colours and voltages on requestOptions / accessoriesGOSTConformity to standardsThe visual characteristics of flashing lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fulfilled.The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:‘Coding of display devices and control elements using colours and supplementary means’.References to visual alarm devices can be found in the following standards:EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837DIN EN 54Fire alarm systemsDIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kVFurther technical information can be found on our website at www.pfannenberg.com109