100 mm

Visual signaling devicesFlashing lights 13 JoulesQuadro S-M-Flex• proven tunnel safety light; conforms to the guideline of the SwissFederal Highways Authority: ‘Signaling systems of safety devices intunnels’• synchronised fl ashing of up to 10 beacons in series with no additionalcontroller• initial current limited to below 1 A• integrated function monitoring with fault message contact• variable brightness and fl ash frequency settings on-site on the device• use of double-pole terminals for the simple connection of paralleloperated lightsr =19 mIP 66IP 67IK 08IlimtSync+ 55 °C- 25 °CRange asper EN 54ProtectionsystemProtectionsystemImpact-proofhousingInitial currentlimited to < 1AOperatingtemperatureElectrical dataQuadro S-M-FlexRated voltage 230 V AC 115 V ACRated frequency 50 Hz / 60 Hz 50 Hz / 60 HzOperating range 195 V – 253 V 95 V – 127 VNominal current consumption 250 mA (1 Hz / 13 J) 350 mA (1 Hz / 13 J)Initial current limited to< 1 A / 10 msAlarm output230 V / 80 mAMechanical dataQuadro S-M-FlexFlash rateadjustable (1 Hz = 60 fl ashes/min.) factory settingFlash energymax. 13 JoulesLight intensity (DIN 5037) clear lens 140 cdLens coloursclear, white, yellow, amber, red, green, blueOperating temperature - 25 °C ... + 55 °CStorage temperature - 40 °C ... + 70 °CRelative humidity 100 %Protection system according to EN 60529IP 66, IP 67; mounting arbitraryImpact resistance as per EN 50102 IK 08Protection classIIDuty cycle 100 %Service life of the flash tube light emission still 70 % after 12,000,000 fl ashesMateriallenspolycarbonate (PC)housing polycarbonate (PC), RAL 7035Connecting terminals spring-type terminal 0.08 - 2.5 mm 2Cable entry (prepared)2 x M20 x 1.5 sidewaysMountingexternal lugs113 x 153 mm – M5 or 127.1 x 127.1 mm – M5internal holes 113 x 113 mmWeight600 g108www.pfannenberg.com