ASSEMBLY MANUAL B-25 Mitchell ARF - RC DEPOT
ASSEMBLY MANUAL B-25 Mitchell ARF - RC DEPOT
ASSEMBLY MANUAL B-25 Mitchell ARF - RC DEPOT
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 11: Wing InstallationRequired Parts• Assembled wing panel (right and left)• Wing tube•Wing bolt plate• 1/4-inch washer (2)• Battery tray (electric only)• Hook and loop strap (electrtic only)• 1/4-20 x 1 1 / 2-inch socket head bolt (2) Step 3Hold the wing bolt plate centered on the wing centersection. Use a felt-tipped pen to mark the location for oneof the holes in the plate.Required Tools and Adhesives• Felt-tipped pen•Drill• Ball driver: 3/16-inch• Drill bit: 1/4-inch (6mm) Step 1Slide the wing tube into one of the wing panels. Step 4Use a 1/4-inch (6mm) drill bit to make a hole in the plate.Position the plate back on the wing. Step 2Slide the remaining panel onto the wing tube. The panelsshould fit tight against each other.57