ASSEMBLY MANUAL B-25 Mitchell ARF - RC DEPOT

Section 7: Fixed Landing Gear InstallationRequired Parts• Assembled engine nacelle (right and left)• Main landing gear (right and left)• Steering arm • 5/32 wheel collar (7)• 3mm setscrew (8) • Nose gear mount• 3mm washer (8) • 3mm nut (4)• Servo• Pull-pull cable• Crimp (4) • Nylon clevis (2)• Tapered nose gear block • Nose gear• Rigging coupler, Z-bend (2)• Rigging coupler, threaded (2)• Nose wheel, 2 1 / 2-inch (63mm)• 3mm x 25mm machine screw (4)• #4 x 1-inch sheet metal screw (8)• Main wheel, 3 1 / 4-inch (82mm) (2)• #2 x 3/8-inch sheet metal screw (8)Required Tools and Adhesives• Flat file• Threadlock• Drill• Felt-tipped pen• Crimping pliers• Side cutters• Hex wrench: 1.5mm (included)• Drill bit: 1/16-inch (1.5mm), 5/64-inch (2mm),7/64-inch (3mm) Step 2Attach the 5/32-inch wheel collar to the landing gearusing a 3mm setscrew and the included 1.5mm hexwrench. Use threadlock on the setscrew to prevent it fromvibrating loose. Step 3Slide the wheel onto the gear and secure it with a finalwheel collar and setscrew. Step 1Use a file to create a flat area on the main and nose gearwires for the wheel collar setscrews. This helps in keepingthem secure on the landing gear.Important: Use threadlock onany metal-to-metal fasteners.39