ASSEMBLY MANUAL B-25 Mitchell ARF - RC DEPOT

Section 4: Operation Flap Linkage Installation Step 4Apply a few drops of thin CA to each of the holes drilledin the previous step. This will help harden the wood,making the screws more secure in their placement. Step 6The string will now be attached to the flap servo lead andto the aileron extension. Step 5Secure the flap servo in the wing using the hardwareprovided with the servo. Step 7Remove the standard servo arm from your servo andinstall the longer 180-degree servo arm included withthe servo. With the flap servo plugged into the receiver,use the radio system to operate the flap servo. Afterdetermining the up and down positions, set the flap servointo the up position.23