ModelSim SE GUI Reference - Parent Directory

GR-1861 - Simulator windowsDefine Clock dialogPurpose Menu command Additional informationAdd clock signals Edit > Advanced >Clockforce command (CR-169)The Define Clock dialog includes the following options:• Clock NameThe name of the clock signal.• OffsetThe time after the current simulation time that the first transition will occur.• DutyThe percentage of the period that the clock is high or low.• PeriodThe period of the clock signal.• CancelA simulation period after which the clock definition should be cancelled.• Logic ValuesIf the signal type is std_logic, std_ulogic, bit, verilog wire, verilog net, or any other logictype where 1 and 0 are valid, then 1 is the default High Value and 0 is the default LowValue. For other signal types, you will need to specify a High Value and a Low Value forthe clock.ModelSim SE GUI Reference