ModelSim SE GUI Reference - Parent Directory

GR-1761 - Simulator windows• Address RangeSpecifies all or a range of addresses to be saved into the file.• File FormatSpecifies whether memory is to be saved in Verilog Hex, Verilog Binary, or MTI format.Also, specify the Address and Data radix for MTI format.• No addressesSpecifies that no addresses are to appear in the saved file. This enables the file to bereloaded anywhere in the memory.• CompressApplies a simple ASCII compression to the saved file. The compression algorithmreplaces repeating lines with a single asterisk, like is done with the Unix “od” command.• Line WrapDesignates that lines of memory data will Fit in Window or allows user to designateWords per Line.• FilenameName of file to be saved.MTI memory data file formatThe MTI memory data file format is as illustrated in the following example:// memory data file// (do not edit the following line - required for mem load use)// format=mti addressradix=d dataradix=s direction=ascending0: 110 110 110 110 110 1106: 110 110 110 110 000 00012: 000 000 000 000 000 00018: 000 000 000 000 000 00024: 000 000 000 000 000 00030: 000 000The possible format, address radix, data radix, and direction settings are as specified by thecorresponding options in the mem save command (CR-194) and mem load command (CR-191).ModelSim SE GUI Reference