Cisco Small Business RV 120W Wireless-N VPN Firewall ...

Configuring the Wireless NetworkConfiguring Basic Wireless Settings3the data packet and the output queue identifies the output queue in which thepacket is transmitted:• Voice (4) or Video (3)—High priority queue, minimum delay. Typically usedto send time-sensitive data such as video and other streaming media.• Best Effort (2)—Medium priority queue, medium throughput and delay. Mosttraditional IP data is sent to this queue.• Background (1)—Lowest priority queue, high throughput. Bulk data thatrequires maximum throughput and is not time-sensitive is typically sent tothis queue (FTP data, for example).If you want to change the output queue for packets marked with a particular DSCP,select the new output queue from the drop-down list.STEP 7Click Save.Configuring Wireless Network (SSID) SchedulingYou can configure each of the four available wireless networks on the CiscoRV120W to be active during certain times of the day. To configure the schedule fora wireless network:STEP 1STEP 2STEP 3STEP 4STEP 5STEP 6STEP 7Choose Wireless > Basic Settings.In the Wireless Basic Settings Table, check the box on the left of the wirelessnetwork you want to configure.Click Edit SSID Scheduling.Select the wireless network for which you want to create a schedule.Check the Enable box to allow you to create a schedule to make the networkactive during certain times.Enter the start and stop times for the network to be active.Click Save.Cisco RV120W Administration Guide 60