Cisco Small Business RV 120W Wireless-N VPN Firewall ...

Configuring NetworkingConfiguring IPv62Configuring IPv6If you have an IPv6 network, see the following sections.Configuring the IP ModeTo configure IPv6 properties on the Cisco RV120W, set the IP mode to IPv6:STEP 1STEP 2STEP 3Choose Networking > IPv6 > IP Mode.Click the IPv4 and IPv6 Dual-Stack radio button.Click Save.Configuring IPv6 WAN SettingsConfiguring WAN properties for an IPv6 network differs depending on which typeof Internet connection you have. See the sections below for detailed instructions.The Cisco RV120W can be configured to be a DHCPv6 client of the ISP for thisWAN or a static IPv6 address provided by the ISP can be assigned.Configuring DHCPv6When the ISP allows you to obtain the WAN IP settings via DHCP, you need toprovide details for the DHCPv6 client configuration.STEP 1STEP 2STEP 3STEP 4Choose IPv6 > IPv6 WAN (Internet).In the WAN (Internet) Address (IPv6) field, choose DHCPv6.Choose if the DHCPv6 client on the gateway is stateless or stateful. If a statefulclient is selected, the gateway connects to the ISP's DHCPv6 server for a leasedaddress. For stateless DHCP, it is not necessary to have a DHCPv6 serveravailable at the ISP. Instead, an ICMPv6 discover message will originate from theCisco RV120W and is used for auto-configuration.Click Save.Cisco RV120W Administration Guide 42