Cisco Small Business RV 120W Wireless-N VPN Firewall ...

Configuring NetworkingConfiguring the LAN (Local Network) Settings2STEP 4STEP 5STEP 6STEP 7Enter a description for the VLAN.To enable routing between this and other VLANS, check the Inter VLAN Routingbox.To enable device management, check the Device Management box. This allowsyou to access the Device Manager from that VLAN. For example, if you created aVLAN with the VLAN ID of 2 and enabled device management, you can access theDevice Manager by using the first IP address on the created VLAN (for example,192.168.2.1).Under each of the ports for the VLAN, choose one of the following:• Tagged—Used when connecting to switches carrying multiple VLANs.• Untagged—Access ports connecting to end devices like printers andworkstations.STEP 8Click Save.Configuring Multiple VLAN SubnetsWhen you create a VLAN, a subnet is created automatically for the VLAN. You canthen further configure the VLAN properties, such as the IP address and DHCPbehavior.To edit a VLAN:STEP 1STEP 2STEP 3Choose Networking > LAN > Multiple VLAN Subnets. The list of subnets appears.Check the box next to the VLAN you want to edit and click Edit.If you want to edit the IP address of this VLAN:a. In the IP address field, enter the new IP address.b. Enter the Subnet Mask for the new IP address.c. Click Save. If you are connected to the Cisco RV120W by the LAN port that is amember of this VLAN, you might have to release and renew the IP address onthe PC connected to the LAN port, or manually assign an IP address to your PCthat is in the same subnet as the VLAN. Open a new browser window and reconnectto the Cisco RV120W.Cisco RV120W Administration Guide 31