Cisco Small Business RV 120W Wireless-N VPN Firewall ...

Configuring NetworkingConfiguring the WAN (Internet) Settings2Configuring the IPv4 WAN (Internet)STEP 1STEP 2Choose Networking > WAN (Internet) > IPV4 WAN (Internet).Choose the type of Internet connection you have. The type of connection you havedetermines the rest of the information you need to enter. See the sections belowfor more information:• Configuring Automatic Configuration (DHCP), page 20• Configuring Static IP, page 21• Configuring PPPoE, page 21• Configuring PPTP, page 22• Configuring L2TP, page 23Configuring Automatic Configuration (DHCP)If your Internet Service Provider (ISP) uses the Dynamic Host ConfigurationProtocol (DHCP) to assign you an IP address, you receive a dynamic IP addressfrom your ISP.To configure DHCP WAN settings:STEP 1STEP 2Choose Networking > WAN (Internet) > IPv4 WAN (Internet).From the Internet Connection Type drop-down menu, chooseAutomatic Configuration - DHCP.STEP 3 Enter MTU information. (See Configuring MTU Settings, page 24.)STEP 4 Enter MAC Address information. (See Configuring the MAC Address, page 24.)STEP 5Click Save.Cisco RV120W Administration Guide 20