Cisco Small Business RV 120W Wireless-N VPN Firewall ...

IntroductionMounting the Cisco RV120W1Mounting the Cisco RV120WYou can place your Cisco RV120W on a desktop or mount it on a wall.Installation Guidelines• Ambient Temperature—To prevent the device from overheating, do notoperate it in an area that exceeds an ambient temperature of104°F (40°C).• Air Flow—Be sure that there is adequate air flow around the device.• Mechanical Loading—Be sure that the device is level and stable to avoidany hazardous conditions.For desktop placement, place the Cisco RV120W device horizontally on a flatsurface so that it sits on its four rubber feet.Wall MountingSTEP 1Determine where you want to mount the device and install two screws (notsupplied) that are 2-7/16 in. apart (approximately 61 mm). Mounting screws shouldhave a head that is approximately 5.5 mm in diameter and 2 mm deep, with a shaftthat is at least15.5 mm long and approximately 3.5 mm wide. (Your wall mayrequire shorter or longer screws, or drywall anchors.)Do not mount the screw heads flush with the wall; the screw heads must fit insidethe back of the device.STEP 2With the back panel pointing up (if installing vertically), line up the device so thatthe wall-mount slots on the bottom of the device line up with the two screws.2-7/16Wallmountslots195114Cisco RV120W Administration Guide 6