Cisco Small Business RV 120W Wireless-N VPN Firewall ...
Cisco Small Business RV 120W Wireless-N VPN Firewall ...
Cisco Small Business RV 120W Wireless-N VPN Firewall ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Administering Your <strong>Cisco</strong> <strong>RV</strong><strong>120W</strong>Backing Up and Restoring the System7!CAUTIONDuring a restore operation, do not try to go online, turn off the router, shut down thePC, or do anything else to the router until the operation is complete. This shouldtake about a minute. When the test light turns off, wait a few more seconds beforedoing anything with the router.To back up a configuration or restore a previously-saved configuration, selectAdministration > Backup/Restore Settings.• To restore your saved settings from a backup file, click Browse, locate andselect the file, and click Restore. An alert page displays the status of therestore operation. After the restore, the router restarts automatically withthe restored settings.• To save a copy of your router’s startup configuration, click Backup StartupConfiguration. The browser downloads the configuration file and promptsyou to save the file on the PC.• To save a copy of your router’s mirror configuration, click Backup MirrorConfiguration. The browser downloads the configuration file and promptsyou to save the file on the PC.The mirror image is the last working configuration. The startup configurationis the configuration that the device used to boot up. The startup and mirrorconfigurations can differ. For example, if you made changes to the currentconfiguration but forgot to save it, after 24 hours, the device automaticallysaves the currently-running configuration as the “mirror” image. But if thedevice crashed during the 24 hour window, then the device will use thestartup configuration to boot up.• To copy the mirror configuration file to the startup configuration file, clickCopy Mirror to Startup. This replaces the startup configuration file with themirror configuration file. You may want to do this if the device crashed andyou had to reset the device to factory defaults. After you perform thefactory reset, the mirror image is not erased, and you can copy it to thestartup configuration to allow the device to use the configuration to boot up.<strong>Cisco</strong> <strong>RV</strong><strong>120W</strong> Administration Guide 133
Change language