Cisco Small Business RV 120W Wireless-N VPN Firewall ...

Administering Your Cisco RV120WConfiguring Time Settings7Configuring Time SettingsYou can configure your time zone, whether or not to adjust for Daylight SavingsTime, and with which Network Time Protocol (NTP) server to synchronize the dateand time. The router then gets its date and time information from the NTP server. Toconfigure NTP and time settings:STEP 1STEP 2STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8Choose Administration > Time Settings.Select your time zone, relative to Greenwich Mean Time (GMT).If supported for your region, check the Adjust for Daylight Savings Time box. In the“From” and “To” fields, enter the month and day for which Daylight Saving Time willbe active. In the Daylight Saving Offset field, choose the amount of time, inminutes, that the clock will be offset during daylight saving time.Select whether to use a Network Time Protocol (NTP) server, or set the time anddate manually.If you chose NTP, choose to use either a default NTP server, or a custom NTPserver.If you chose to use a default NTP server, choose the server you want to use fromthe list. If you chose to use a custom NTP server, enter the server addresses orfully-qualified domain name.If you chose to set the date and time manually, enter the date and time.Click Save.Backing Up and Restoring the SystemYou can back up custom configuration settings for later restoration or restore froma previous backup from the Administration > Backup/Restore Settings page.When the router is working as configured, you can back up the configuration forrestoring later. During backup, your settings are saved as a file on your PC. You canrestore the router's settings from this file.Cisco RV120W Administration Guide 132