Cisco Small Business RV 120W Wireless-N VPN Firewall ...

Configuring Quality of Service (QoS)Configuring Profile Binding6STEP 3Enter this information:NamePriorityMinimum BandwidthRateEnter the name of the profile.If the WAN QoS mode is set to Priority, choose thepriority level from the drop-down menu.If the WAN QoS mode is set to Rate Limit, enter theminimum bandwidth rate (1 to total WANbandwidth in Kbps).Maximum BandwidthRateIf the WAN QoS mode is set to Rate Limit, enter themaximum bandwidth rate (100–1000000 Kbps).STEP 4Click Save.STEP 5 To bind the profile to a traffic selector, see Configuring Profile Binding, page 114.Configuring Profile BindingAfter creating WAN QoS profiles, you must bind them to traffic selectors.To create a profile binding:STEP 1STEP 2Choose QoS > Profile Binding.In the Available Profiles field, choose a WAN QoS profile.To create a profile, click Configure Profile. See Configuring WAN QoS Profiles,page 112 for more information.STEP 3From the Service drop-down menu, choose the service the profile applies to.If the service you are looking for is not in the drop-down menu, you can configure acustom service in the Firewall page (see Creating Custom Services, page 83.)STEP 4From the Traffic Selector Match Type drop-down menu, choose the traffic selectorto use to bind traffic to the profile.Cisco RV120W Administration Guide 114