RFP for BHOPAL & Narmadapuram Division - Madhya Pradesh ...

(v) ROB for railway crossings as per the requirement and thestandards of the Indian Railways; and,(vi) Alignment plans, longitudinal sections and cross-sections@ 50m intervals;(vii) Designs for road furniture and road safety/traffic controlfeatures;(viii) Designs and drawings for service road/ (provided no landacquisition is involved) tree planting/fencing at locationswhere necessary / required;(ix) Drainage design showing location of turnouts, out fallingstructures, separate drawings sheet for each 5 km. stretch;(x) Rehabilitation and repair plan with for bridges andstructures design and drawings;(xi) Traffic amenities (Parking Areas, Weighing Station andRest Areas, etc.);(xii) Other safety features.4.9.6.1.2 Wherever feasible within the constraints of the available land,symmetrical widening of the existing carriageway shall be avoidedand the required widening shall be achieved by widening along oneside of the existing road.4.9.6.2 Design Standards4.9.6.2.1 The Consultants shall evolve Design Standards and materialspecifications for the Study primarily based on IRC publications,MORTH Circulars and relevant recommendations of theinternational standards (American, Australian, British, Canadian,Japanese).4.9.6.2.2 The Design Standards evolved for the project shall cover allaspects of detailed design including the design of geometricelements, pavement design, bridges and structures, traffic safetyand materials4.9.6.3 Geometric Design4.9.6.3.1 Based on the data collected from reconnaissance andtopographic surveys, the sections with geometric deficiencies, ifany, should be identified and suitable measures for improvementshould be suggested for implementation within the right of way.However as safety concern proposal for L.A., if any be submittedwithin two months from date of issue of work order.4.9.6.3.2 The detailed design for geometric elements shall cover, butnot be limited to the following major aspects:ADB-IV49