maintenance kits for electrical connectors and wiring systems

DMC30 WIRING SYSTEM SERVICE KITFor the AIRBUS A300, A310, A320, A330, & A340THE MAINTENANCE PROBLEM...Modern aircraft have complicated electrical wiring systems containingmany different connectors, contacts and terminals, the repair of whichrequire precision tools.DMC30 for the Airbus A300, A310,A320, A330, & A340It is not a cost effective use of the time of your technical staff to startfrom scratch and try to become intimately knowledgeable about whichprecision tools must be used to repair each electrical connector,contact and terminal when DMC has already performed this task forthe Airbus A300, A310, A320, A330, & A340.AOG TIME CONSTRAINTS. Once the aircraft becomes inoperable because of a connector failure, it is imperativeto be able to replace the connector, contact or terminal as quickly as possible to avoid revenue loss due to AOG.The DMC30 kit supplies your staff with both the information and the tools necessary to make this type of repair tothe Airbus A300, A310, A320, A330, or A340 in the shortest time possible.THE DMC SOLUTION...TOOLING RESEARCH. DMC has already researched the wiring manual of the Airbus A300, A310, A320, A330,& A340 and has identified the most common tools required to maintain the electrical connectors. DMC has crossreferenced tools to the connectors, contacts and terminals eliminating costly and time-consuming researchwhich would otherwise have to be performed by your localtechnicians.IMMEDIATE AVAILABILITY OF TOOLSAND TECHNICAL INFORMATION. TheDMC30 kit contains the tooling to connector,contact and terminal cross reference informationwhich indicate the particular tool(s)that should be selected to repair a specificconnector, contact, or terminal. In addition,the kit also contains illustrated operatinginstructions for the required tooling.ALL IN ONE. Since these tools, togetherwith their operating instructions, arecontained in a single kit, the connectorrepair can be made in the shortesttime possible, thus permitting arapid return of your aircraft toservice. Tool kit supplied inan environmentally sealedfiberglass case and includes:Name Plate, Foam Pads/Inserts,Contents Charts, Instruction Charts,and Tool Selection Charts.DMC30DMC30Actual Kit may vary from example shown.DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.DMCTools.com • E-MAIL: DMC@DMCTools.comCOPYRIGHT © 2006 Daniels Manufacturing Corp. ALL RIGHTS RESERVEDRev. B 06/06 DMC30-SL

DMC30 WIRING SYSTEM SERVICE KITFor the AIRBUS A300, A310, A320, A330, & A340DMC30 TOOL AND ACCESSORY LIST3 Crimp Tools17 Positioners6 Turret Heads18 Die Sets2 Single Position Heads1 Universal Turret Head1 In-Service Inspection Gage14 Metal Insertion Tools17 Metal Removal Tools155 Plastic Ins/Rem Tools4 Contact gagesDMC30 CONNECTOR COVERAGEMANUFACTURERAir LBAMPDeutschEdisonFlightITT CannonMatrix ScienceRadiallSocapexSERIESJunction ModulesRME Series, RF CoaxialCommon Termination System, SRE/SREL, FDBA SeriesFire Detection ConnectorsFC, FH, FHZ SeriesBKAD/E, CA-KE, DBA, DPAMA,DPDMA, DPXMA, HTAMF, PV SeriesMB, 983 SeriesDSX, JT, NSX SeriesRJT, 992 SeriesSouriau S600, 8T, 8525, 8526, 8533, 8559, 8665,892 SeriesMIL-C-26482 Series 1, 2MIL-C-26500Firewall ConnectorsMIL-C-38999 Series 1, 2MIL-C-50153450 SeriesMIL-C-83723 Series 3MIL-T-7928Insulated Terminals & Splices4 Unwired Contact Removal Toolsw/ Probes1 Wire Cutter2 Wire Strippers1 Die Removal ToolTools contained in this kit have been selected based upon theirsuitability to service the related connector or contact indicated.Military Standard tools have been utilized wherever possible.These tools are not necessarily the production tools used tomanufacture the aircraft and therefore, these tools may or maynot correspond to the tools listed in the OEM wiring manualand/or the Chapter 20 Standard Wiring Practices Manual list ofapproved tooling.1 Hex Wrench4 Contact Retention Testers1 X-Acto KnifeType of CaseTOOL KIT CONFIGURATIONPortableNumber of Cases 1ColorType of ConstructionApplicationCoverageType of InsertsYellowFiberglass/AluminumAirbus A300,A310,A320,A330,A340Airframe ConnectorsTerminals size 12 AWGand SmallerCoaxial ConnectorsUnicellular PolyethyleneFoam with Die Cut Tool CavitiesActual Charts and Sheetsmay vary from examples shown.DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.DMCTools.com • E-MAIL: DMC@DMCTools.comCOPYRIGHT © 2006 Daniels Manufacturing Corp. ALL RIGHTS RESERVEDRev. B 06/06 DMC30-SL