Clamping tools with BT and V flange module

Gd 2d 1Clamping technology | Clamping tools with BT and V flange moduleChucks for cylindrical shanks with angled clamping surfaceShank “CAT” in accordance with ASME B5.50-1994precision adapter for MAPAL NC reamersl 3l 22°l 1Nominal sizesteep taperDimensions G WeightkgSpecificationOrder No.d 1 d 2 l 1 l 2 l 340 16 48 70 48 4 M12x1,25 1,5 MNC-CAT040-16-070-1-0-A 3032010140 20 52 75 50 4 M16x1,5 1,6 MNC-CAT040-20-075-1-0-A 3032010240 25 65 80 56 4 M20x1,5 1,9 MNC-CAT040-25-080-1-0-A 3032010350 16 70 55 48 4 M12x1,25 3,6 MNC-CAT050-16-055-1-0-A 3032010450 20 70 55 50 4 M16x1,5 3,6 MNC-CAT050-20-055-1-0-A 3032010550 25 70 55 56 4 M20x1,5 3,5 MNC-CAT050-25-056-1-0-A 30320106Dimensions in mm.Spare partsFor clamping diameter Clamping screw in accordance with ISO 4028 Length adjustment screwd 1 Size Order No. Size Order No.16 M10x16-45H 10003951 M12x1,25x30 3032618720 M12x16-45H 10003948 M16x1,5x35 3032618825 M12x20-45H 10004663 M20x1,5x40 30326189Dimensions in mm.Usage:For mounting MAPAL NC reamers with cylindrical shank and angled clamping surface (2°)similar to DIN 1835 Form E.Supply includes:Built-in clamping screw and length adjustment screw, does not include pull stud.Design:Permissible run-out variation on the taper in relation to theclamping diameter d 1≤ 0.003 mm.The bore tolerance is reduced to 0.003 mm to obtain the highest quality machining accuracies.Note:The length adjustment screws have a through hole for coolant.For pull studs see page 224.Balancing quality:G 6.3 at 3,000 min -1175