Clamping tools with BT and V flange module

Clamping technology | Clamping tools with BT and V flange moduleMilling cutter arborswith enlarged face connection diameterShank BT in accordance with JIS B 6339l1 d1d2l2Nominal sizeBTDimensionsWeightkgSpecificationOrder No.d 1 d 2 l 1 l 240 22 48 35 19 1,3 MCA-BT040-22-035-1-0-W 1007362940 27 60 35 21 1,4 MCA-BT040-27-035-1-0-W 1007363040 32 78 50 24 2,1 MCA-BT040-32-050-1-0-W 1007363140* 40 89 50 27 2,4 MCA-BT040-40-050-1-0-W 10073632Dimensions in mm.Spare partsFor arbor diameter Milling cutter clamping screwin accordance with DIN 6367 Milling cutter pull screwwith internal coolant supply(e.g. for MAPAL WWS milling heads) Key block Fastening screwfor key blockin accordance with ISO 4762d 1 Size Order No. Order No. Order No. Size Order No.22 M10 10006016 30326178 10005640 M4x10 - 12.9 1000358327 M12 10005164 30326179 10005165 M4x16 - 12.9 1000358632 M16 10004065 30326180 10004063 M5x16 - 12.9 1000360140 M20 10004066 30326181 10004064 M5x16 - 12.9 10003601Dimensions in mm.Supply includes:Key blocks attached and milling cutter clamping screw in accordance with DIN 6367,no pull stud.Design:Permissible run-out variation on the taper in relation to thearbor diameter d 1≤ 0.008 mm.Note:The size marked with * also has 4 threaded bores for mounting cutter heads with toolfastening in accordance with DIN 2079.For assembly tools see page 233.For pull studs see page 224.Balancing quality:G 2.5 at 16,000 min -1169