User Guide (Hasler)

3. Select the type of stamp in the list and press [OK].The Customize stamp screen is updated and displays the menu items that allow youto modify the stamp options.4. Press to return to the home screen.Frequently Asked Questions3System check list:Question...Do I have enough postage?Do I need to clear the BatchCounter?Is the sealing/moistening deviceproperly filled?(if installed)Is the Weighing Platform properlyzeroed or tared?Are labels in place in the ALD?(if you plan to print on tape)AnswerLook at the funds counter at the bottom of the screen,or:Pressand enter 1 to check your funds balance.To add funds, see How to Add Funds to the PSD(Meter) on page 113.Clear batch counters if you intend to issue a reporton the mail run you are about to start (see BatchData Report on page 163).Select Reset counter on the home screen, orSee How to Reset Batch Counters on page 106.For sealing while printing the envelopes.For sealer-equipped feeders, see How to Fill theSealer Bottle on page 267.Before laying envelope(s) on the Weighing Platform,your Home Screen should display 00 lb 0.0 oz. If__lb _._oz is displayed, perform a 'rezero' of the WP.See How to Rezero the Weighing Platform on page218.See How to Fill the Automatic Label Dispenser onpage 107.Processing Mail39