TECHNICAL MANUAL FOR COMPACT VHF DSC RM2042

1 INTRODUCTION RM20421.3 CONTROLSSAILOR COMPACT VHF DSC RM2042 S.P. RADIO DENMARKVOL1 2 34 5 67 8 9OFF.ABC DEF GHIJKL MNO PQRFUNCVHFCHRXMSGEDITLASTNEXTSTU VWX YZ-DISTRESSADDRBOOKCALLSENDDEG0STOPENT27552O VOLFFOn/off/vol turn-style knob.FUNCSelects the function menu window, from which one of seven different functions can beselected, such as the display control functions, printer function etc.VHFCHActivates the VHF channel selection mode, if connected to a VHF transceiver, with serialinterface i.e. RT 2O48.RXMSGSelects the received message menu, which should be used for a display readout ofmessages in the memory bank.EDITThis button is used when you want to edit the content of a stored, user composed, callsequence, or when you want to edit the position information.DISTRESSADDRBOOKActivated alone, this button is used to enter the distress call menu, in which you can composeyour distress message to be transmitted.NOTE! Activated simultaneous with the SEND-button, a distress call will be initiated.Selects the user programmed address book, where you can save up to forty differentcomplete call sequences.CALLSENDNEXTThis button is used to enter the call composition menu, where the entry will be either a stationname or a MID number. If you press Edit under this menu, the following menus will guideyou through the complete composition of a call.This button is used to initiate a call transmission, when a call has been composed or selected.The unit permits the transmission by an appropriate readout to guide the user.NOTE! Activated simultaneous with the DISTRESS-button, a distress call will be initiated.This button is used to select the next menu in an input sequence, and at the same time theuser accepts the content of the actual display read-out.PAGE 1-4