Library for Building Automation Function Block Descriptions ... - Wago

Operating Time (FbOperationTime)Operation time / Run duration controlOperating Time (FbOperationTime)WAGO-I/O-PRO CAA Library ElementsCategory:Building AutomationName:FbOperatingTimeType: Function Function block X ProgramLibrary Name:Building_common.libApplicable to:All programmable fieldbus controllersInput Parameter: Data type: Comment:xEnable BOOL The input set “TRUE“ will startmeasurement of operating time.xReset BOOL The input set “TRUE“ will set all outputvalues to “0“.dwSignalDay DWORD Parameter value for the days when asignal is to be output at xSignal.Preset value = 0bSignalHour BYTE Parameter value for the hours when asignal is to be output at xSignal.Range of values 0 – 23Preset value = 0bSignalMinute DWORD Parameter value for the minutes when asignal is to be output at xSignal.Range of values: 0 – 59Preset value = 0xSignalReset BOOL The input set “TRUE“ will reset the“xSignal“ output.xPreset BOOL A rising edge at this input initializes thecounter with preset values.dwPresetDay DWORD Parameter for the number of days of thepreset initial valuePreset value = 0bPresetHour BYTE Parameter for the number of hours of thepreset initial valueValue range: 0 – 23Preset value = 0bPresetMinute BYTE Parameter for the number of minutes ofthe preset initial valueValue range: 0 – 59Preset value = 0Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com58