Library for Building Automation Function Block Descriptions ... - Wago
Library for Building Automation Function Block Descriptions ... - Wago Library for Building Automation Function Block Descriptions ... - Wago
Function Description:The function block Latching Relay is identical to that of a toggle flip flop. The functionblock reacts on the switching signal at the “xSwitch“ input with a change overfunction. The input is protected by a debounce time of approx. 30ms. The outputsignal “xActuator“ changes its value with every positive switching signal at theinput.The output signal can be switched via the input objects “xCentON“ or “xCentOFF“.Parameter “bModeOnReset“ determines the function blocks behavior following areset at the coupler. The following settings are possible for this parameter:0 = Switching OFF following a reset1 = Switching ON following a reset3 = No change following a reset (the initial value before reset is restored)Note:This function block uses some residual variables having a VAR_RETAINdeclaration.Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com46
Latching Relay with Feedback (Fb_LatchingRelayFeedb)Latching Relay with Feedback (Fb_LatchingRelayFeedb)WAGO-I/O-PRO CAA Library elementsCategory:Building AutomationName:Fb_LatchingRelayFeedbType: Function Function block X ProgramLibrary Name:Building_common.libApplicable to:All programmable fieldbus controllersInput Parameter: Data type: Comment:xSwitch BOOL Input for switching signalxCentOFF BOOL Switching signal Central OFFxCentON BOOL Switching signal Central ONbFeedback BOOL Input for Feedback signalFeedback Value: Data type: Comment:xActuator BOOL Output switching signalGraphical Display:Time Referenced Behavior:xSwitchxCentONxCentOFFxFeedbackxActuator1 secondSubject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com47
- Page 1 and 2: Library forBuilding AutomationFunct
- Page 3 and 4: GeneralWAGO-I/O-PRO CAA Library for
- Page 5 and 6: Important commentsImportant Comment
- Page 7 and 8: Fault indication function block (Fb
- Page 10 and 11: Sunblind (FbSunblind)The times for
- Page 12 and 13: Evaluation of a short / long key ac
- Page 14 and 15: Time delayed switching ON and OFF (
- Page 16 and 17: Ambient Light Control (Fb_AmbientLi
- Page 18 and 19: Constant light control for 0 - 10 V
- Page 20 and 21: Constant light control for 0 - 10 V
- Page 22 and 23: Constant light control for 0 - 10 V
- Page 24 and 25: Dimmer Single Switch (FbDimmerSingl
- Page 26 and 27: Dimmer Single Switch (FbDimmerSingl
- Page 28 and 29: Dimmer Double Switch (FbDimmerDoubl
- Page 30 and 31: Switching Scene (FbSceneDigital)Fun
- Page 32 and 33: Dimming Scene (FbSceneAnalog)Functi
- Page 34 and 35: Linear 2 Point (Fu_Linear_2punkt)Ch
- Page 36 and 37: Linear 10 Point (Fu_Linear_10)Funct
- Page 38 and 39: Lowpass filter (FbFilter_T1)Time re
- Page 40 and 41: SendOnDelta for WORD (Fb_wSendOnDel
- Page 42 and 43: Stairwell Light without Pre-Warning
- Page 44 and 45: Stairwell Light with Pre-Warning (F
- Page 48 and 49: Function Description:The function b
- Page 50 and 51: Level Switch for 1 to 5 stages (Fb_
- Page 52 and 53: Tableau for 8 buttons (fb_Tableau)T
- Page 54 and 55: Switching ON/OFF Delay (Fb_Delay)De
- Page 56 and 57: Limit monitor (Fb_Weather)Time Refe
- Page 58 and 59: Operating Time (FbOperationTime)Ope
- Page 60 and 61: Operating Time (FbOperationTime)Imp
- Page 62 and 63: Run Duration Control (FbRunDuration
- Page 64 and 65: Clock (Fb_Time)Graphical Display:Fu
- Page 66 and 67: Scheduler (FbTimeSwitch)Graphical D
- Page 68 and 69: Presence simulation (FbRandom)Funct
- Page 70 and 71: SNVT Setting (FbSetting)Function De
- Page 72 and 73: Unpack SNVT Setting (FbUnpackSettin
- Page 74 and 75: Unpack SNVT State (FbUnpackState)Un
- Page 76 and 77: SCPT Level Percent (FuSCPT_lev_perc
- Page 78 and 79: SCPT temp p (Fu_SCPT_temp_p)SCPT te
Latching Relay with Feedback (Fb_LatchingRelayFeedb)Latching Relay with Feedback (Fb_LatchingRelayFeedb)WAGO-I/O-PRO CAA <strong>Library</strong> elementsCategory:<strong>Building</strong> <strong>Automation</strong>Name:Fb_LatchingRelayFeedbType: <strong>Function</strong> <strong>Function</strong> block X Program<strong>Library</strong> Name:<strong>Building</strong>_common.libApplicable to:All programmable fieldbus controllersInput Parameter: Data type: Comment:xSwitch BOOL Input <strong>for</strong> switching signalxCentOFF BOOL Switching signal Central OFFxCentON BOOL Switching signal Central ONbFeedback BOOL Input <strong>for</strong> Feedback signalFeedback Value: Data type: Comment:xActuator BOOL Output switching signalGraphical Display:Time Referenced Behavior:xSwitchxCentONxCentOFFxFeedbackxActuator1 secondSubject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com47