Library for Building Automation Function Block Descriptions ... - Wago
Library for Building Automation Function Block Descriptions ... - Wago Library for Building Automation Function Block Descriptions ... - Wago
Linear 10 Point (Fu_Linear_10)Function Description:Straight segments are defined by the points (rX1, rY1) to (rX10. rY10). The inputvalue “rInput_X“ is divided into segments, linearized and set at output “rY“ bymeans of these points. As such, the entered points determine the value of the outputsignal Y=f(x). Ensure that the reference points X are always entered in anascending order. Reference points Y may be entered in any order. Outside of thedefined area, the points of the last segment are applied. To limit the output valueoutside of the defined segments, e recommended that the last two Y points haveidentical values.If two consequential X points are identical, the output value is set to 0.YrY1, rY2rY3rY4rY5rY6rY9, rY10rX1rX2rX3 rX4 rX5 rX6 rX7 rX8 rX9 rX10XSubject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com36
Lowpass filter (FbFilter_T1)FilterLowpass filter (FbFilter_T1)WAGO-I/O-PRO CAA Library ElementsCategory:Building AutomationName:FbFilter_T1Type: Function Function block X ProgramLibrary Name:Building_common.libApplicable to:All programmable fieldbus controllersInput Parameter: Data type: Comment:iInput INT Unfiltered input signaldwT1_In10telSec DWORD Time constant of the filterbModeOnReset Byte Initialization options0 = the output is initialized with theparameter (iInitInput).1 = the output is initialized with the inputvalue iInput.2 = the output is initialized with the lastoutput value.Preset value = 2iInitInput INT Initialization valueFeedback value: Data type: Comment:iOutput1 INT Smoothed output signalGraphical display:Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com37
- Page 1 and 2: Library forBuilding AutomationFunct
- Page 3 and 4: GeneralWAGO-I/O-PRO CAA Library for
- Page 5 and 6: Important commentsImportant Comment
- Page 7 and 8: Fault indication function block (Fb
- Page 10 and 11: Sunblind (FbSunblind)The times for
- Page 12 and 13: Evaluation of a short / long key ac
- Page 14 and 15: Time delayed switching ON and OFF (
- Page 16 and 17: Ambient Light Control (Fb_AmbientLi
- Page 18 and 19: Constant light control for 0 - 10 V
- Page 20 and 21: Constant light control for 0 - 10 V
- Page 22 and 23: Constant light control for 0 - 10 V
- Page 24 and 25: Dimmer Single Switch (FbDimmerSingl
- Page 26 and 27: Dimmer Single Switch (FbDimmerSingl
- Page 28 and 29: Dimmer Double Switch (FbDimmerDoubl
- Page 30 and 31: Switching Scene (FbSceneDigital)Fun
- Page 32 and 33: Dimming Scene (FbSceneAnalog)Functi
- Page 34 and 35: Linear 2 Point (Fu_Linear_2punkt)Ch
- Page 38 and 39: Lowpass filter (FbFilter_T1)Time re
- Page 40 and 41: SendOnDelta for WORD (Fb_wSendOnDel
- Page 42 and 43: Stairwell Light without Pre-Warning
- Page 44 and 45: Stairwell Light with Pre-Warning (F
- Page 46 and 47: Function Description:The function b
- Page 48 and 49: Function Description:The function b
- Page 50 and 51: Level Switch for 1 to 5 stages (Fb_
- Page 52 and 53: Tableau for 8 buttons (fb_Tableau)T
- Page 54 and 55: Switching ON/OFF Delay (Fb_Delay)De
- Page 56 and 57: Limit monitor (Fb_Weather)Time Refe
- Page 58 and 59: Operating Time (FbOperationTime)Ope
- Page 60 and 61: Operating Time (FbOperationTime)Imp
- Page 62 and 63: Run Duration Control (FbRunDuration
- Page 64 and 65: Clock (Fb_Time)Graphical Display:Fu
- Page 66 and 67: Scheduler (FbTimeSwitch)Graphical D
- Page 68 and 69: Presence simulation (FbRandom)Funct
- Page 70 and 71: SNVT Setting (FbSetting)Function De
- Page 72 and 73: Unpack SNVT Setting (FbUnpackSettin
- Page 74 and 75: Unpack SNVT State (FbUnpackState)Un
- Page 76 and 77: SCPT Level Percent (FuSCPT_lev_perc
- Page 78 and 79: SCPT temp p (Fu_SCPT_temp_p)SCPT te
Linear 10 Point (Fu_Linear_10)<strong>Function</strong> Description:Straight segments are defined by the points (rX1, rY1) to (rX10. rY10). The inputvalue “rInput_X“ is divided into segments, linearized and set at output “rY“ bymeans of these points. As such, the entered points determine the value of the outputsignal Y=f(x). Ensure that the reference points X are always entered in anascending order. Reference points Y may be entered in any order. Outside of thedefined area, the points of the last segment are applied. To limit the output valueoutside of the defined segments, e recommended that the last two Y points haveidentical values.If two consequential X points are identical, the output value is set to 0.YrY1, rY2rY3rY4rY5rY6rY9, rY10rX1rX2rX3 rX4 rX5 rX6 rX7 rX8 rX9 rX10XSubject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com36
Change language