Library for Building Automation Function Block Descriptions ... - Wago

More documents

Recommendations

Info

Dimmer Single Switch (FbDimmerSingleSwitch)DimmerDimmer Single Switch (FbDimmerSingleSwitch)WAGO-I/O-PRO CAA Library ElementsCategory:Building AutomationName:FBDimmerSingleSwitchType: Function Function block X ProgramLibrary Name:Building_common.libApplicable to:All programmable fieldbus controllersInput Parameter: Data type: Comment:xDimmSwitch BOOL Switch signal switching/dimmingxSceneSwitch BOOL Scene switchxCentON BOOL Central command, output activationxCentOFF BOOL Central command, output deactivationbDimmValue BYTE Setting output to value (0 – 200)uiT_ShortIn10telSec UINT Time for a brief key actuationDefault setting = 5xMemoOFF BOOL Deactivating memory functionDefault setting = TRUEbMaxDimmValue BYTE Parameter value max. lightValue range: 0 – 200Default setting = 200bMinDimmValue BYTE Parameter value minimum lightValue range: 0 – 200Default setting = 10bDimmValueatMemoOFF BYTE Switch-on light (if no memory)Value range: 0 – 200Default setting = 200uiT_SpeedIn10telSec UINT Dimming time from Hmin HmaxValue range: 30 – 1000Default setting = 50bModeOnReset BYTE Behavior after reset0=AUS; 1=EIN; 3 = ---Default setting = 3Feedback Value: Data type: Comment:xSwitch BOOL Switching signal outputbNvo_DimmValue BYTE Dimmer signal output via nvo to LONValue range: 0 - 200wAODimmValue WORD Dimmer signal output internally to 1 –10VValue range: 0 - 32767Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com24
Dimmer Single Switch (FbDimmerSingleSwitch)Graphical Display:Function Description:A lamp can be dimmed by means of the function block “DimmerEinfachTaster“.The dimmer switch module evaluates short and long key actuation at the“xDimmSwitch“ input. The input is protected by a debounce time of approx. 50ms.In the event of a long actuation of key, (parameterizable actuation time“uiT_ShortIn10telSec“) dimming up or down is performed by two output objects.The dimming value is set by two different data formats. In one of the formats, anadaptation is made to the SNVT_switch (“bNvo_DimmValue“ 0-200), in the second,to the analog module 0-10V (“wAODimmValue“ 0 - 32767). Following dimming upand stopping at the desired light, the next key actuation is a down dimming process.Dimming ON is possible by means of a long key actuation. If the key actuation isshorter than the parameterized time, an ON/OFF telegram is transmitted.The objects “xCentON“ and “xCentOFF“ allow to switch the function block, via acentral command ON and OFF. The function block can also be addressed via avalue object (e.g. from a scene module). If a light value is received on the“bDimmValue“ object, the lighting switches ON at the corresponding light value.Subsequently the light can be changed again via the switch signal. This means thatthe value object only influences the output signal of the tip dimmer module in theevent of a value change.The lighting can also be switched off via the value input, if the 0 value is received. Itis possible, via the “ xSceneSwitch“ input, to re-activate the light value of the“bDimmValue“ object as the output value of the tip dimmer module. This mightbecome possible in conjunction with the scene module.The last dimming value is saved when switching OFF and transmitted whenswitching ON again. This memory function can be de-activated for the purpose ofparameterizing a fixed switch-on light. The switch-on light is determined by“bDimmValueatMemoOFF“, prerequisite being that the memory function is deactivated.Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com25
Page 1 and 2: Library forBuilding AutomationFunct
Page 3 and 4: GeneralWAGO-I/O-PRO CAA Library for
Page 5 and 6: Important commentsImportant Comment
Page 7 and 8: Fault indication function block (Fb
Page 10 and 11: Sunblind (FbSunblind)The times for
Page 12 and 13: Evaluation of a short / long key ac
Page 14 and 15: Time delayed switching ON and OFF (
Page 16 and 17: Ambient Light Control (Fb_AmbientLi
Page 18 and 19: Constant light control for 0 - 10 V
Page 26 and 27: Dimmer Single Switch (FbDimmerSingl
Page 28 and 29: Dimmer Double Switch (FbDimmerDoubl
Page 30 and 31: Switching Scene (FbSceneDigital)Fun
Page 32 and 33: Dimming Scene (FbSceneAnalog)Functi
Page 34 and 35: Linear 2 Point (Fu_Linear_2punkt)Ch
Page 36 and 37: Linear 10 Point (Fu_Linear_10)Funct
Page 38 and 39: Lowpass filter (FbFilter_T1)Time re
Page 40 and 41: SendOnDelta for WORD (Fb_wSendOnDel
Page 42 and 43: Stairwell Light without Pre-Warning
Page 44 and 45: Stairwell Light with Pre-Warning (F
Page 46 and 47: Function Description:The function b
Page 48 and 49: Function Description:The function b
Page 50 and 51: Level Switch for 1 to 5 stages (Fb_
Page 52 and 53: Tableau for 8 buttons (fb_Tableau)T
Page 54 and 55: Switching ON/OFF Delay (Fb_Delay)De
Page 56 and 57: Limit monitor (Fb_Weather)Time Refe
Page 58 and 59: Operating Time (FbOperationTime)Ope
Page 60 and 61: Operating Time (FbOperationTime)Imp
Page 62 and 63: Run Duration Control (FbRunDuration
Page 64 and 65: Clock (Fb_Time)Graphical Display:Fu
Page 66 and 67: Scheduler (FbTimeSwitch)Graphical D
Page 68 and 69: Presence simulation (FbRandom)Funct
Page 70 and 71: SNVT Setting (FbSetting)Function De
Page 72 and 73: Unpack SNVT Setting (FbUnpackSettin
Page 74 and 75:
Unpack SNVT State (FbUnpackState)Un
Page 76 and 77:
SCPT Level Percent (FuSCPT_lev_perc
Page 78 and 79:
SCPT temp p (Fu_SCPT_temp_p)SCPT te
show all

Library for Building Automation Function Block Descriptions ... - Wago

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?