Library for Building Automation Function Block Descriptions ... - Wago
Library for Building Automation Function Block Descriptions ... - Wago
Library for Building Automation Function Block Descriptions ... - Wago
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Sunblind (FbSunblind)The times <strong>for</strong> positioning and lamellae adjustment can be parameterized. The runcommand <strong>for</strong> sun protection is structured as followed:1. Sunblind moves UP <strong>for</strong> the set running time uiT_WholePosTimeIn10telSec2. Wait <strong>for</strong> the end of the switch-over pause uiT_WaittimeUpDownIn10telSec3. Sunblind moves DOWN <strong>for</strong> the parameterized time “uiT_MoveShadowPosIn10telSec“4. Wait <strong>for</strong> the end of the switch-over pause uiT_WaittimeUpDownIn10telSec5. Then tilt the lamellae <strong>for</strong> the “ uiT_MoveTurnLamellaIn10telSec“ periodThe sun protection automatic can be switched off via input “xManualAutomatic“ (0/ 1). In this manner you can avoid that the sunblind will automatically move in thecause of events, such as training courses or exams.The output “bJalPos_0_200“ returns the in<strong>for</strong>mation of the rough position of thesunblind. The position is calculated from the running time(uiT_LfzGesamtIn_10telSec). The accuracy there<strong>for</strong>e depends on the registeredrunning time and the difference in speed between opening and closing of thesunblind.The behavior of the function module following a reset does not entail any change atthe output.Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2009 Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web:http://www.wago.com10
Change language