Note : - Welltech Computer Co., Ltd

More documents

Recommendations

Info

Figure 13. WellGate 2680 FXO Routing table.4. Configure incoming Ring Cadence to FXO GatewayWhen you connect WellGate 2680 FXO gateway Lines to local PABX’s extension orPSTN switch, please go to WellGate 2680 webpage setting at Phone Setting toconfigure proper Ring Cadence ( Ring ON time and Ring OFF time ) according to thePABX or PSTN ring Cadence specification.Without configuring Ring Cadence to FXO gateway properly according to PABX orPSTN Ring Cadence, FXO may detect Ring signal in a strange behavior and causeabnormal operation.WellGate 2680 factory default Ring Cadence setting is 1 seconds ON, 2 seconds OFF.Some PABX or PSTN provides 1 second ON and 3 seconds OFF Ring Cadence. In thiscase, please configure WellGate 2680 Ring Cadence to 1 second ON and 3 seconds OFFto match incoming Ring signal. See Figure 14.14Welltech Technology Co., Ltd. Released Version 1.0
Figure 14. Ring Cadence of FXO Gateway.Finally , if you have no idea what is Ring Cadence of PABX or PSTN, you can trysetting the ON time and OFF time to 1000 (1 second) and 8000(8 seconds), see Figure15.Figure 15. Ring Cadence of FXO Gateway.15Welltech Technology Co., Ltd. Released Version 1.0
Page 1 and 2: WellGate 2608 ( 8-FXS ) and WellGat
Page 3 and 4: WellGate 2608 (8-FXS Gateway ) info
Page 5 and 6: Step 4: Go to Line Setting webpage
Page 7 and 8: Enter HOT LINE TEL field to 26808 w
Page 9 and 10: Figure 7. Configure FXS Routing tab
Page 11 and 12: as follows.TEL No : 26801User ID :
Page 13: Figure 11. FXO Line Configuration.F
Page 17 and 18: Figure 17. Select Caller ID number
Page 19 and 20: 7. FLASH command generation and det
Page 21: 21Welltech Technology Co., Ltd. Rel

Note : - Welltech Computer Co., Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?