EFIS-D60 Installation Guide - Dynon Avionics
EFIS-D60 Installation Guide - Dynon Avionics EFIS-D60 Installation Guide - Dynon Avionics
1. INTRODUCTIONThis manual provides information about the physical, electrical, and plumbing installation of theEFIS-D60, EDC-D10A and optional AOA pitot probe purchased from Dynon Avionics.Additionally, this guide deals with setting up the installation-dependant firmware options.Because you may not have purchased all the components, you need only read through therelevant sections of this guide. Information about the operation of this instrument can be foundin the EFIS-D60 Pilot’s User Guide.The EFIS-D60 uses solid-state sensor technology to give an accurate and easy-to-understanddisplay. To ensure accuracy in its readings, it is very important that you install the instrumentcorrectly and perform the specified calibration steps. This installation guide will help youthrough that process.WarningDynon Avionics’ products incorporate a variety of precise, calibrated electronics. Except forreplacing the optional internal backup battery in EFIS-based products per the installation guide,our products do not contain any field/user-serviceable parts. Units that have been found to havebeen taken apart may not be eligible for repair under warranty. Additionally, once a DynonAvionics unit is opened up, it will require calibration and verification at our Woodinville, WAoffices before it can be considered airworthy.EFIS-D60 Installation Guide 1-1
- Page 1: EFIS-D60Installation GuideThis prod
- Page 5: Table of ContentsContact Informatio
- Page 9 and 10: 2. WIRING OVERVIEWPlease follow the
- Page 11 and 12: Wiring OverviewThe pin assignments
- Page 13 and 14: 3. INSTRUMENT INSTALLATIONThis sect
- Page 15 and 16: Instrument InstallationThe metal sh
- Page 17 and 18: Instrument InstallationAlso, do not
- Page 19 and 20: Instrument InstallationAudio Alert
- Page 21: Connecting Static & Pitot LinesThe
- Page 24 and 25: EFIS Calibration and ConfigurationO
- Page 26 and 27: EFIS Calibration and Configurationl
- Page 28 and 29: Appendix3. Ensure that the screen i
- Page 30 and 31: AppendixAlert Message Description E
- Page 32 and 33: AppendixProblemInternal Backup Batt
- Page 34 and 35: Appendix• Two plumbing lines (usu
- Page 36 and 37: AppendixHeater Controller WiringBef
- Page 38 and 39: Appendixthese lines, you may drill
- Page 40 and 41: Appendixflight regimes not listed t
- Page 42 and 43: Appendixdirectly to your switched a
- Page 44 and 45: AppendixAppendix D: Replacing the E
1. INTRODUCTIONThis manual provides information about the physical, electrical, and plumbing installation of the<strong>EFIS</strong>-<strong>D60</strong>, EDC-D10A and optional AOA pitot probe purchased from <strong>Dynon</strong> <strong>Avionics</strong>.Additionally, this guide deals with setting up the installation-dependant firmware options.Because you may not have purchased all the components, you need only read through therelevant sections of this guide. Information about the operation of this instrument can be foundin the <strong>EFIS</strong>-<strong>D60</strong> Pilot’s User <strong>Guide</strong>.The <strong>EFIS</strong>-<strong>D60</strong> uses solid-state sensor technology to give an accurate and easy-to-understanddisplay. To ensure accuracy in its readings, it is very important that you install the instrumentcorrectly and perform the specified calibration steps. This installation guide will help youthrough that process.Warning<strong>Dynon</strong> <strong>Avionics</strong>’ products incorporate a variety of precise, calibrated electronics. Except forreplacing the optional internal backup battery in <strong>EFIS</strong>-based products per the installation guide,our products do not contain any field/user-serviceable parts. Units that have been found to havebeen taken apart may not be eligible for repair under warranty. Additionally, once a <strong>Dynon</strong><strong>Avionics</strong> unit is opened up, it will require calibration and verification at our Woodinville, WAoffices before it can be considered airworthy.<strong>EFIS</strong>-<strong>D60</strong> <strong>Installation</strong> <strong>Guide</strong> 1-1