You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WELLTESTING EQUIPMENTTEST SEPARATORSDESCRIPTIONTest separators are 3-phase (gas, oil and water) vessels fullyequipped with pressure and level controls, liquid flowmeters,gas flow recorder, gauges and shrinkage tester.<strong>FCE</strong> offers the most commonly used sizes:- Horizontal 1440 PSI - 42” x 15’.- Horizontal 1440 PSI - 42” x 10’.- Horizontal 600 PSI - 42” x 10’.Other sizes and pressure ratings, either horizontal or verticaldesign, can be supplied to client request.PROCESS & DESIGN DATA- API 12J / ASME VIII div.1 / ANSI B31-3.NACE MR01-75 for sour gas.- Design temperature....... : -29°C to 100°C.Size & Rating600 PSI42”x10’1440 PSI42”x10’1440 PSI42”x15’Design Press. 600 psi 1345 psi 1345 psiGas capacity 33.2 MMscf/d 44.8 MMscf/d 56.0 MMscf/dOil capacity 9430 bbl/d 8870 bbl/d 13210 bbl/dWater capacity 2650 bbl/d 2060 bbl/d 3080 bbl/dTotal liquid cap. 12080 bbl/d 10930 bbl/d 16290 bbl/dWEIGHTS & DIMENSIONSSize & Rating600 PSI 1440 PSI 1440 PSI42”x10’ 42”x10’ 42”x15’Length in mm 6058 6058 7530Width in mm 2438 2438 2438Height in mm 2590 2590 2590Weight in kg 11200 14200 16900Note: dimensions are given for skid design with ISO blocks.OPTIONS- Low temperature to -40°C.- LSH / LSL nozzles / alarms for EPF purposes.- Various liquid flowmeter types & brands.- Various valves and component brands.- Various adders on request (Check valves, instruments, etc.).- Additional 2’’ or 3’’ gas measuring line.- DNV 2.7.3 or 2.7.1 certified skid.- ASME U-stamp or PED certification (CE Marking).- Data Acquisition System and sensors.17Note 1:The design pressure is given for Max temp. of 100°C (212°F).1440 PSI design pressure is limited to 38°C (100°F) by theflange rating of 600#RF on those separators.Note 2:The flow rates given are nominal capacities for:- 1 minute retention time for liquids.- Oil/Gas interface at vessel centreline.- Water/Oil interface at LC nozzle elevation.- Gas S.G. of 0.7.- Gas temperature of 54°C.Flow capacities will vary depending on level adjustmentand process conditions.