Catalogue angl PART A.pdf - FCE

SOLIDS REMOVAL EQUIPMENT2-STAGE DUAL POT SAND FILTERSDESCRIPTIONPrinciple of operationThe Dual Pot Sand Filter is designed to remove solid particlesfrom well effluent. Located after the flowhead, it protectsdownstream equipment against erosion.The 2-SF (2 - Stage Filtration) dual pot sand filter offers manyadvantages when compared to conventional models:The first stage filtration is achieved by centrifugal separationwhilst the second stage filtration employs an advancedremovable screen to perform a mechanical cut-out. Thevessels are fitted with a removable wear sleeve and thenecessary nozzles for flushing with water.As the fluid flows from outside to inside the screen, the flowarea is not obstructed by the sand accumulation, providinga longer operating time compared to competitors.ConfigurationThe Unit consists of:- 2 filters pots.- 5-Valve 3” 1/16 process manifold (10K gate valves).- 2-Valve 2” 1/16 drain manifold (10K gate valves).- Dump line c/w 2” manually operated adjustable choke.- One piece skid c/w platforms, ladder and handrails.- 2 x 4 ISO corner blocks (on horizontal skid only).- 2 forklift pockets and 4 lift lugs.The horizontal layout with all connections on one side makesrig-up and site erection easier. It can be easily installed ontoa trailer which is ideal for onshore use.The standard 3” I.D. manifold provides less pressuredrop across the unit compared to most designs offeringconstruction from 3” nominal pipe.A vertical layout can be also offered when limited footprintis a major issue (i.e. some offshore applications). In case flowdirection may be “in” to “out”.PROCESS & DESIGN DATAAPI 6A / ASME / ANSI B31-3 / NACE MR01-75.Gas capacity.............................. : 35 MMSCF/D.Liquid capacity........................... : 5000 BBL/D (@ 200 µ).Design pressure........................... : 10 000 PSI.Design temperature................... : -29°C to 121°C.Std filter cut-out.......................... : 100, 200 or 400 µm.Std Max Diff. Pressure................. : 1350 PSI.Inspection level per API.............. : PSL2.Inlet & Outlet connections......... : 3” figure 1502.Drain outlet connection............ : 2” figure 1502.OPTIONS- Double block and bleed valve process manifold(9 valves).- 4” figure 1502 unions.- 4” 1/16 process manifold.- Low temperature service (up to -40°C).- High temperature service (up to +190°C).- Specific inspection level on customer request(PSL3, PED certification & CE marking, etc.).- DNV 2.7.3 or 2.7.1 certified skid.WEIGHTS & DIMENSIONS (With 3” 1/16 process manifold)Model Horizontal VerticalLength in mm 6058 C.F.Width in mm 2438 C.F.Height in mm 2700 C.F.Weight in kg 8500 C.F.15Horizontal sand filter (9 valve manifold shown)