Catalogue angl PART A.pdf - FCE

WELL SERVICE MANIFOLDSMISCELLANEOUS MANIFOLDS14Configurations can be built to customer requirements andaccording to specific applications such as:- Welltest vertical choke manifolds with ESDV and dataheader.- Welltest by-pass manifolds.- Welltest BS&W manifolds.- Drilling Stand pipe manifolds.- Frac Flowback manifolds.- Gravel Pack / Squeeze manifolds.- Etc.SOLIDS REMOVAL EQUIPMENTFILTER PUPSDESCRIPTIONThe filter pup consists of an inline removable screen andouter ”casing”, allowing solid particles removal from the welleffluent with fluid flow from outside the screen to the inside.The filter pup is supplied with its adaptors to match the line size.Because of its limited retention volume, the filter pup isgenerally used for temporary operations. However, skidmounted combinations including a number of filters andsuitable inlet and outlet manifolding can be supplied atclient request.PROCESS & DESIGN DATA- ANSI B31.3, Standard service.- Pressure rating.................. : 5000 / 10000 PSI.- Temperature rating.......... : -29°C to 121°C.- Filtration cut-out............... : 300 and 800 microns.3” Inline filter pup for 2” line sizeWEIGHTS & DIMENSIONS (for skid units and 3” nominal flow line)Line Size 2” 3”Filter body size 3” 4”Liquid flow capacity20 m3/h 42 m3/h3100 bbl/d 6000 bbl/dConnections 2” fig.1502 3” fig.1502OPTIONS- ”In” to ”Out” flow direction.- Other sizes and pressure ratings on request.- Other filtration cut-outs on request (50 to 1000 microns).- Low temperature service (up to -40°C).- High temperature service (up to +190°C).- NACE MR01-75 for sour gas service.- Skid mounted combinations at customer request.Solids removal skid unitNo. of 4” filter pups (vertically) 2 4 6 8Length in mm 1600 1600 2300 3200Width in mm 1800 2400 2400 2400Height in mm 2500 2500 2500 2500Weight in kg 2500 3500 5000 7000