Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WirelessModifying Advanced Settings4Different settings display depending on the mode you select. Table 19 describesthe fields and configuration options for the Advanced Settings page.Table 19FieldAdvanced Settings Field DescriptionsDescriptionStatus (On/Off)Specify whether you want the wireless <strong>radio</strong> on or off byclicking On or Off.If you turn off a wireless <strong>radio</strong>, the access point sendsdisassociation frames to all the wireless clients it wassupporting so that the wireless <strong>radio</strong> can be gracefullyshutdown and the clients can start the association processwith other available access points.NOTE: If Status is set to Off, then all fields are not able to beedited.ModeThe Mode defines the Physical Layer (PHY) standard usedby the wireless <strong>radio</strong>.NOTE: The modes available on your access point dependon the country code setting.Select one of the following modes for the wireless <strong>radio</strong>interface:• 802.11a• 802.11b/g• 802.11a/n• 802.11b/g/n• 5 GHz 802.11n• 2.4 GHz 802.11n<strong>Cisco</strong> AP 541N <strong>Dual</strong>-<strong>band</strong> <strong>Single</strong>-<strong>radio</strong> <strong>Access</strong> <strong>Point</strong> Quick Start Guide 82
Change language