Cisco AP541N Dual-band Single-radio Access Point Administration ...

4WirelessModifying Virtual Access Point SettingsTable 12FieldWEP Field DescriptionsDescriptionKey TypeSelect the key type by clicking one of the radio buttons:• ASCII• HexWEP KeysYou can specify up to four WEP keys. In each text box, enter astring of characters for each key. The keys you enter dependon the key type selected:• ASCII. Includes upper and lower case alphabeticletters, the numeric digits, and special symbols suchas @ and #.• Hex. Includes digits 0 to 9 and the letters A to F.Use the same number of characters for each key as specifiedin the Characters Required field. These are the RC4 WEPkeys shared with the stations using the access point.Each client station must be configured to use one of thesesame WEP keys in the same slot as specified here on theaccess point.Characters Required: The number of characters you enterinto the WEP Key fields is determined by the Key length andKey type you select. For example, if you use 128-bit ASCIIkeys, you must enter 13 characters in the WEP key. Thenumber of characters required updates automatically basedon how you set Key Length and Key Type.65 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide