Cisco AP541N Dual-band Single-radio Access Point Administration ...

3SetupConfiguring 802.1X AuthenticationTable 8FieldUsernameIEEE 802.1X Authentication Field DescriptionsDescriptionEnter the MD5 username for the access point to use whenresponding to requests from an 802.1X authentication server.The username can be 1 to 64 characters in length. ASCIIprintable characters are allowed, which includes upper andlower case letters, numbers, and special symbols such as @and #. Double quote (") is not a valid character.NOTE: If the 802.1X Supplicant is Disabled, the Usernamefield is not editable.PasswordEnter the MD5 password for the access point to use whenresponding to requests from an 802.1X authentication server.The password can be 1 to 64 characters in length. ASCIIprintable characters are allowed, which includes upper andlower case letters, numbers, and special symbols such as @and #. Double quote (") is not a valid character.NOTE: If the 802.1X Supplicant is Disabled, the Passwordfield is not editable.NOTEAfter you configure the settings on the Authentication page, you must click Applyto apply the changes and to save the settings. Changing some settings might causethe access point to stop and restart system processes. If this happens, wirelessclients will temporarily lose connectivity. We recommend that you change accesspoint settings when WLAN traffic is low.45 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide