Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8Configuration ExamplesClustering <strong>Access</strong> <strong>Point</strong>sClustering <strong>Access</strong> <strong>Point</strong>sThis example shows how to configure a cluster with two APs and to enableautomatic channel re-assigment.The location of the local access point is Room214, and the cluster name is MyCluster.Clustering APs by Using the Web InterfaceSTEP 1STEP 2STEP 3STEP 4Log onto the access point and navigate to the Cluster > <strong>Access</strong> <strong>Point</strong>s page.Enter the access point location and the name of the cluster for it to join.Click Apply.Click Enable Clustering to enable the clustering feature.After you refresh the page, other APs that are on the same bridged segment, havewireless <strong>radio</strong>s in the same operating mode, are enabled for clustering, and havethe same cluster name appear in the <strong>Access</strong> <strong>Point</strong>s table.165 <strong>Cisco</strong> AP 541N <strong>Dual</strong>-<strong>band</strong> <strong>Single</strong>-<strong>radio</strong> <strong>Access</strong> <strong>Point</strong> Quick Start Guide
Change language