Cisco AP541N Dual-band Single-radio Access Point Administration ...

8VAP Configuration from the Web InterfaceSTEP 1STEP 2STEP 3STEP 4Log onto the access point and navigate to the Wireless > Wireless Network Setup(VAPs) page.In the Enabled column for VAP 3, select the check box.Enter 3 in the VLAN ID column.In the SSID column, delete the existing SSID and type Marketing.STEP 5Select WPA Personal from the menu in the Security column.The screen refreshes, and additional fields appear.STEP 6STEP 7Select the WPA2 and CCMP (AES) options, and clear the WPA and TKIP options.Enter a WPA encryption key in the Key field.The key can be a mix of alphanumeric and special characters. The key is casesensitive and can be between 8 and 63 characters.Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 158