Cisco AP541N Dual-band Single-radio Access Point Administration ...

Clustering Multiple Access PointsViewing Wireless Neighborhood Information7Table 40Advanced Channel Management SettingsFieldDetermine if there isbetter set of channelseveryDescriptionUse the dropdown menu to specify the schedule forautomated updates.A range of intervals is provided, from 30 Minutes to 6MonthsThe default is 1 Hour (channel usage reassessed andthe resulting channel plan applied every hour).Click Apply under Advanced settings to apply these settings.Advanced settings will take affect when they are applied and influence howautomatic channel management is performed.Viewing Wireless Neighborhood InformationThe Wireless Neighborhood shows all access points within range of everymember of the cluster, shows which access points are within range of whichcluster members, and distinguishes between cluster members and nonmembers.NOTE When accessing the Cluster - Wireless Neighborhood page, a maximum of 20detected access points are reported per access point. To see all the detectedaccess points, directly access the Neighboring Access Points page of the specificaccess point.For each neighbor access point, the Wireless Neighborhood view showsidentifying information (SSID or Network Name, IP address, MAC address) alongwith radio statistics (signal strength, channel, beacon interval). You can click on anaccess point to get additional statistics about the access points in radio range ofthe currently selected access point.Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 150