Cisco AP541N Dual-band Single-radio Access Point Administration ...

7Clustering Multiple Access PointsManaging Cluster SessionsFigure 34Session ManagementDetails about the session information shown is described in Table 37.Table 37Session ManagementFieldAP LocationCluster NameDescriptionIndicates the physical location of the access point.The location can be a maximum of 64 characters inlength. All alphanumeric characters except doublequote (") are valid. Null or empty space is not allowed.Enter the name of the cluster for the access point tojoin. The name can be a maximum of 64 characters inlength. All alphanumeric characters except doublequote (") are valid. Null or empty space is not allowed.The cluster name is not sent to other access points inthe cluster. You must configure the same clustername on each access point that is a member of thecluster. The cluster name must be unique for eachcluster you configure on the network.143 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide