Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Cisco AP541N Dual-band Single-radio Access Point Administration ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<strong>Administration</strong>Event LogsEnabling or Disabling the Log Relay Host on the Events PageTo enable and configure Log Relaying on the Event Logs page, set the Log Relayoptions as described in Log Relay Host, page 131, and then click Apply.Figure 30Log Relay HostTable 32FieldRelay LogLog Relay HostDescriptionChoose to either enable or disable use of the Log Relay Host.Relay HostRelay PortIf you select the Relay Log <strong>radio</strong> button, the Log Relay Host isenabled and the Relay Host and Relay Port fields areeditable.Specify the IP Address or DNS name of the remote logserver.Specify the Port number for the syslog process on the RelayHost. The default port is 514.NOTETo apply your changes, click Apply. Changing some settings might cause theaccess point to stop and restart system processes. If this happens, wireless clientswill temporarily lose connectivity. We recommend that you change access pointsettings when WLAN traffic is low.131 <strong>Cisco</strong> AP 541N <strong>Dual</strong>-<strong>band</strong> <strong>Single</strong>-<strong>radio</strong> <strong>Access</strong> <strong>Point</strong> Quick Start Guide
Change language