Cisco AP541N Dual-band Single-radio Access Point Administration ...

6AdministrationAdministratorTable 30Administrator PageFieldAdministratorNameAdministratorContactAccess PointLocationCurrentPasswordNew PasswordConfirm NewPasswordDescriptionEnter the name of the administrator. You can use up to 64alphanumeric and symbols characters. [ASCII values 32 to 126excluding double quote(")].Enter the e-mail address or phone number of the person tocontact regarding issues related to the access point. You canuse up to 255 alphanumeric and symbols characters. (ASCIIvalues 32 to 126 excluding double quote.)Enter the physical location of the access point, for exampleConference Room A. You can use up to 255 alphanumeric andsymbols characters. (ASCII values 32 to 126 excluding doublequote.)Enter the current administrator password. You must correctlyenter the current password before you are able to change it.Enter a new administrator password. The characters you enterare displayed as bullet characters to prevent others fromseeing your password as you type.The administrator password must be an alphanumeric string ofup to 8 characters. Do not use special characters or spaces.Re-enter the new administrator password to confirm that youtyped it as intended.NOTEAfter you configure the settings on the Administrator page, you must click Apply toapply the changes and to save the settings. Changing some settings might causethe access point to stop and restart system processes. If this happens, wirelessclients will temporarily lose connectivity. We recommend that you change accesspoint settings when WLAN traffic is low.119 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide