Cisco AP541N Dual-band Single-radio Access Point Administration ...

SNMPConfiguring SNMP on the Access Point5Table 28SNMP v3 Users (Continued)FieldAuthentication TypeDescriptionSelect the type of authentication to use on SNMPrequests from the user:MD5—Require MD5 authentication on SNMPv3requests from the user.Authentication KeyEncryption TypeNone—SNMPv3 requests from this user require noauthentication.If you specify MD5 as the authentication type, enter apassword to enable the SNMP agent to authenticaterequests sent by the user.The passphrase must be between 8 and 32characters in length.Select the type of privacy to use on SNMP requestsfrom the user:DES—Use DES encryption on SNMPv3 requests fromthe user.Encryption KeySNMPv3 UsersNone—SNMPv3 requests from this user require noprivacy.If you specify DES as the privacy type, enter a key touse to encrypt the SNMP requests.The passphrase must be between 8 and 32characters in length.This field shows the users that you have defined onthe access point. To remove a user, select the user andclick Remove.NOTEAfter you configure the SNMPv3 Users settings, you must click Apply to apply thechanges and to save the settings.Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 114