Cisco AP541N Dual-band Single-radio Access Point Administration ...

SNMPConfiguring SNMP on the Access Point5Table 27SNMPv3 GroupsFieldSecurity LevelDescriptionSelect one of the following security levels for thegroup:noAuthentication-noPrivacy—No authentication andno data encryption (no security).Authentication-noPrivacy—Authentication, but no dataencryption. With this security level, users send SNMPmessages that use an MD5 key/password forauthentication, but not a DES key/password forencryption.Authentication-Privacy—Authentication and dataencryption. With this security level, users send an MD5key/password for authentication and a DES key/password for encryption.Write ViewsFor groups that require authentication, encryption, orboth, you must define the MD5 and DES key/passwords on the SNMPv3 Users page.Select the write access to management objects (MIBs)for the group:write-all—The group can create, alter, and delete MIBs.Read Viewswrite-none—The group is not allowed to create, alter, ordelete MIBS.Select the read access to management objects (MIBs)for the group:view-all—The group is allowed to view and read allMIBs.SNMPv3 Groupsview-none—The group cannot view or read MIBs.This field shows the default groups and the groupsthat you have defined on the access point. To removea group, select the group and click Remove.NOTEAfter you configure the SNMPv3 Groups settings, you must click Apply to apply thechanges and to save the settings.Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 112