A032-ET - International Laser Ranging Service

More documents

Recommendations

Info

Event Timer A032-ETresulting in too large delay of receiving the first time-tags by the ET-client. In some casesthis may cause unwanted problems with real-time operation of the ET-client. In suchcases it is recommended to decrease the M value as far as possible. For example, ifR=0.5 KHz and M=25, the time M/R=50 ms and period T M may be about 45 ms.The A032.2 option provides cyclical measurement of events that come at the separate inputsof the ET-device in a strict order. Specifically, in the beginning of each cycle the EventTimer measures a single Start-event coming at the Input A of the ET-device, and onlythen - a number of Stop-events (up to 12,000) coming at the Input B (Fig.3). The Stopeventsare registered over internal gate. The gate delay T Dj is programmable by the ETclientin a wide range with 10 ns LSD resolution.T CINPUT ARegistered Start eventsINPUT BT DjRegistered Stop eventsT D(j+1)GatingDatareadingDataprocessingand sendingT WT RTo TCPTo TCPFig.3. Time diagram illustrating the measurement provided by the A031.2 optionUnlike the A032.1 option, in this case the ET-device at first accumulates TD-blocks in theFIFO memory during some user-defined waiting period T W , starting from Start-eventregistration. During this time the ET-server processes TD-blocks read out from the ETdevicein previous cycle, and sends the corresponding time-tags to the ET-client. Then theET-server interrupts the event registration, reads the currently accumulated TD-blocksand allows starting the next similar cycle. In any case the amount of TD-blocks read bythe ET-server does not exceed the user-defined value M (from 1 to 12,000). The waitingperiod T W can be defined in a wide range with a 1 ms step.During the waiting period T W the ET-server can receive a command from the ET-client torestart the measurement with modified gate delay. In this case the next measurementcycle will be performed with a new gate delay. For example, the restart commandcontaining a modified gating parameter can be cyclically sent by the ET-client in responseto each received batch of timing data. In this way online cycle-to-cycle controllable gatingis possible. However it should be taken into account that the TCP/IP network may producesome unexpected delays for real-time data exchange, resulting in episodic loss ofsynchronism in such interactive operation at high (more than tens of Hz) repetition rate ofmeasurement cycles.The minimum available cycle duration T C is defined by time period of data processing (thatshould be less than the waiting period T W ) and time period T R of data reading. Total timeof these operations depends on the amount of TD-blocks that the ET-server reads andprocesses. The time additionally needed for network interactions depends on the networkperformance and its actual load. These things should be taken into account to choose theparameters T W and M so that they are well matched with the specific measurementconditions.8
Event Timer A032-ETGenerally the A032.2 option is oriented mainly to applications with cycle repetition rate upto tens of Hz (this is the case of conventional Satellite Laser Ranging). But if the M valueis not too large (
Page 1 and 2: Event Timer A032-ETManualInstitute
Page 3 and 4: Event Timer A032-ETCONTENTSNotices
Page 5 and 6: Event Timer A032-ETSummary of speci
Page 7: Event Timer A032-ETAt the next stag
Page 11 and 12: Event Timer A032-ET- Time synchroni
Page 13 and 14: Event Timer A032-ET“Measurement
Page 15 and 16: Event Timer A032-ETThe ET-device do
Page 17 and 18: Event Timer A032-ETInteraction proc
Page 19 and 20: Event Timer A032-ET* Normally delay
Page 21 and 22: Event Timer A032-ET2.6. Measurement
Page 23 and 24: Event Timer A032-ETpar5 - waiting p
Page 25 and 26: Event Timer A032-ETDEMO subsystem A
Page 27 and 28: Event Timer A032-ET3.1. Accessory p
Page 29 and 30: Event Timer A032-ETZoomOut - click
Page 31 and 32: Event Timer A032-ETDEMO subsystem A
Page 33 and 34: Event Timer A032-ET3.1. Accessory p
Page 35 and 36: Event Timer A032-ET“Graph” - ri
Page 37: Event Timer A032-ET4.2. Measurement

A032-ET - International Laser Ranging Service

Create successful ePaper yourself

Delete template?

Save as template?