A032-ET - International Laser Ranging Service

Event Timer A032-ET4. Error codeserr codeProblem explanation-10 The ET-device is inaccessible-20 The failure of interface with the ET-device; check the specified port address and protocol-30 The failure of the ET-device or interface with it (bad timing data)-40 Waiting time for Start pulse was more than 30 sec-80 The 1 pps sync pulses are not found-90 The synchronization cannot be done, because the intervals between 1 pps sync pulses areincorrect-1000 Currently there is a Session with another ET-Client-xxxxx7 Time correction parameter is out of permitted range from –10800 to +10800 (±3 hours)-xxxx7x Triggering parameter is invalid; there are two permitted values: 4 and 2-xxx7xx The buffer size value is out of permitted range; there are four possible values: 0, 1, 2, 3.-xx7xxx The time period of the ET-device memory checking is out of permitted range (from 10 ms to30000 ms)-x7xxxx The waiting period is out of permitted range (from 1 to 30000 ms)-7xxxxx The number of Stop events is out of permitted range (from 1 to 12000)24