A032-ET - International Laser Ranging Service

Event Timer A032-ETNOTICESSAFETYWarning. Dangerous voltages, capable of causing death, are present in the A032-EThardware. Use extreme caution whenever the device cover is removed.Line voltage. The A032-ET hardware operates from 100 to 240 V nominal ac powersource. Verify that your power source complies this condition.Power cord. The A032-ET is supplied with the detachable, three-wire power cord forconnection to the power source and to a protective ground. Always use an outlet, whichhas a properly connected protective ground.PREPARATION FOR USEWarning. The A032-ET needs careful handling and should be served by skilledspecialists. Especially be careful to the A032-ET hardware interconnection sinceincorrect handling can damage the device.Necessarily read this Manual over before any initial actions with the instrument. Feel freeto ask (E-mail: artyukh@edi.lv) if you will have any troubles concerning the A032-ETapplication.The A032-ET hardware contains a complicated finely adjusted electronic circuit. Do notremove the device cover without special necessity to protect this circuit from anycareless handling.Hardware connection to PC. The A032-ET is supplied with the detachable connectingcable for hardware connection to the PC parallel port. Always use this cable to ensurethe A032-ET reliable operation.Hardware connection to other instruments. Carefully read part 3.2 of this Manual todefine in details all requirements to the signals that you will use in your application. Theinstrument may lose the specified precision or even be damaged if operated withunforeseen signals.WARRANTYThe A032-ET hardware is warranted to be free from any hidden defects in material andworkmanship for one year from the date of purchase. During this warranty period theManufacturer repairs the device at no charge or replaces it with a new one. TheManufacturer does not assume responsibility for any damages of the instrument causedby incorrect user handling.2