MAINTENANCE MANUAL - Meritor

Removal and disassemblyDifferential Case and Rear Ring Gear MS-113 Plus1. Remove the ring gear capscrews. Figure2.20.1 - Side Gear2 - Thrust WasherFigure 2.171 - CAPSCREWFigure 2.201 - RING GEAR2 - DIFFERENTIAL CASEFigure 2.182. Separate the case halves. Figure 2.21. Removethe thrust washer and the pinion. Figure2.22.3. Remove the differential pinion shaft, the sidegears and the thrust washers. Figure 2.23.4. Remove the side gear and thrust washer. Figure2.24. Use a brass hammer to removethe differential case. Figure 2.25.5. Use a bearing puller or a press to remove thebearing cones from both halves of the differentialcase. Figure 2.19.Figure 2.211 - DIFFERENTIAL CASEFigure 2.19MAINTENANCE MANUAL11