lista general workbench and workspace furniture catalog

LISTA GENERAL WORKBENCH ANDWORKSPACE FURNITURE CATALOG

ContentsLista offers a comprehensivearray of innovative workspaceand accessory systems, all ofLista – Making Workspace Work ® 4Workstations and Ergonomics 6which are described in this catalog.Within the following pages,you’ll find:• Easy-Order offerings of abroad range of Lista products• A wide selection of accessoriesthat allow you tocreate your own customsolutions• Solutions for almost anyworkspace need, and muchmore!You can use this catalog toorder the workspace systemsWorkspace Furniture 8Arlink ® 8000 Workstations 12Arlink 8000 Easy-Order Combinations 18Build-Your-Own Arlink 8000 Workstations 20Arlink 8000 Components 22Arlink 8000 Flow Racks and Utility and Parts Carts 29VSI (Vertical Space Integrator) Accessory System 31For a complete list of contents for Arlink 8000 workstations, see page 13.that exactly suit your individualneeds.To help you navigate thecatalog, our sections are colorcoded:Arlink ® 8000 WorkstationsAlign ® Adjustable Height Workstations 32Align Adjustable Height Workstation Easy-Order Combinations 34Align Adjustable Height Workstation Components 35For a complete list of contents for Align workstations, see page 9.Align ® Adjustable HeightWorkstationsTechnical ElectronicWorkstationsIndustrial WorkbenchesCabinet PedestalsNexus System, includingPacking Benches, Standsand TrolleysTechnical Electronic Workstations 38Technical Electronic Workstation Easy-Order Combinations 40Technical Electronic Workstation Components 42For a complete list of contents for technical electronic workstations, see page 9.For in-depth index, see page 99.

THE MOST COMPLETE, INTEGRATED SYSTEM OFWORKSPACE SOLUTIONS YOU’LL FIND ANYWHEREIndustrial Workbenches 46Industrial Workbench Easy-Order Combinations 52Industrial Workbench Components 56For a complete list of contents for industrial workbenches, see page 47.Cabinet Pedestals 60Narrow Width Cabinet Pedestals 60Narrow Width Easy-Order Cabinet Combinations 62MP Width Cabinet Pedestals 66MP Width Easy-Order Cabinet Combinations 68Lista Nexus System 72Nexus Components 76Nexus System Easy-Order Combinations 84Nexus System Packing Benches 86Nexus System Packing Bench Components 88Nexus System Packing Bench Easy-Order Combinations 90Nexus System Stationary Stands, Mobile Trolleys, Flow Racks 92Nexus System Stationary Stand and Mobile Trolley Components 93Nexus System Stationary Stand and Mobile Trolley Easy-Order Combinations 94Nexus System Flow Rack Components 97Nexus System Flow Rack Easy-Order Combinations 97For a complete list of contents for Nexus system products, see page 73.Seating 98Index 99

Lista – Making Workspace Work ®At Lista, we provide themost complete selection ofworkbenches, workspace furniture,accessories and more. Wehelp you create work environmentsthat:• Are high quality• Improve productivity• Benefit the user throughsmart ergonomic design• Offer unmatched flexibility• Are attractive andcomfortableThe workbench you want,the way you want it.No other workbench or workspacefurniture supplier offers yousuch a comprehensive collection ofsolutions. And we’re always exploringand developing new ways tomake your workspace work evenbetter. That’s why you can count onus to provide:• The flexibility to interchangeaccessories across our productline, for a custom solutionwithout a custom price• The freedom to reconfigurecomponents and accessories toexactly suit the needs of differentapplications and users, no matterhow often they changeWe can provide workspacesolutions that will fit the needs ofevery department in a wide rangeof facilities, including:• R&D• Manufacturing• Assembly• Quality control• Maintenance & repair• Shipping/receiving• Laboratories• Warehouse/distribution• Service & repair• Test & calibration• Education• And moreBuilt to last.The result of high-quality,all-steel construction and innovativeengineering and design, Lista productsare built to provide decades offunctionality and ease of use in themost demanding working environments.Each solution we offerfeatures superior stability and durability,the hallmarks of all Listaproducts.Our products feature a durable,high-quality powder coat finish.An investment in a Lista modularworkspace system will still be payingdividends years from now.4

The industry’s best productsdeserve the best support.Lista has knowledgeable, helpfulresellers throughout NorthAmerica. So no matter where youare, the guidance, products andsupport you need are alwaysnearby.Our free design services areactually priceless.Lista’s engineering and designteam is ready to provide you with adetailed plan for your individualworkspace and storage needs, freeof charge. We offer solutions thatare designed for maximum efficiencyand future flexibility, optimizingspace and profit ability.• Floorspace utilization analysis:we can prepare CAD drawings ofsite plans and elevations for agrouping of products, or entireroom-sized solutions.• Customized surveys and layouts:Lista experts will surveyyour current and future storageand workspace needs, and proposesolutions that provide thehighest density and greatest productivity.• Integration with architecturaland construction planning:rely on our experience with coordinatingwith architectural andconstruction professionals at anystage of a project’s development.• Price quotes: we are happy toprovide free estimates and pricequotes for any project, regardlessof size.Custom applications that thinkoutside the box.Custom applications are nevera problem at Lista. Our engineeringand manufacturing teams willwork closely with you to analyzeyour needs and modify our standardproducts to meet yourspecial requirements.5

Lista – Putting Ergonomics in Their PlaceNo matter what kind of jobis performed at a Lista workstation,your workers benefit fromthe most advanced applicationof ergonomic science. They’ll besafer, more comfortable, moreorganized, and ultimately, moreproductive.Get in the zone.Work is most efficient when it’skept within areas defined as “primaryreach zones” – the horizontaland vertical areas a worker canreach with minimal arm, head ortrunk movement (see illustrationsbelow). Work outside the primaryWhy are ergonomics important?Twisting, lifting, bending, reaching– these movements can wastetime and put unnecessary stress onyour workers. Repetitive motioninjuries and other work-relatedmusculoskeletal conditions increaseboth downtime and workers’ compensationcosts. The application ofergonomic principles can:• Improve productivity by eliminatingwasted motion• Minimize the risk of workinjuries• Reduce workers’ compensationcasesreach zones adds movement,wastes time and erodes produc -tivity.By addressing the differencesamong tasks and workers, we candevelop ergonomic workspaces thatfit just about any situation. In thiscatalog, you’ll find:• Height-adjustable worksurfacesthat can be raised or lowered• Articulating arms that positioncomponents and tools withineasy reach• Other above-the-worksurfaceaccessories that minimize workerstrainOur solutions keep workflowcompact, organized and as close aspossible to the primary reach zones,for less stress on your workers andmore efficiency and productivity foryour business.Vertical Reach ZonesHorizontal Reach Zones1st. 5" to 7".Reach objects movingonly the elbows.2nd. 15" to 18".Arm extension, using the rotaryjoint and shoulder movement.The primary reach zone is anarc extending down from thelevel of the operator’s heart.3rd. 24" to 30".Full arm and trunkmovement needed.4th.Full body movement neededto reach tools and equipment.6

How do we make workspace• Will workstations be integratedBased on your answers, ourThe economics of ergonomics.work so well?To create your optimal Listaworkspace, we ask a lot ofquestions:with material flow (racks or conveyors,for example)?• Is there frequent job rotation? Doworkers from different shifts ordepartments share a station?workspace designers and engineersdevelop comprehensive technicaland design plans that illustrate theworkspace solutions and acces-Immediate increases in productivitymean greater profitability anda quick return on your investment.Long-term cost efficiency is deliv-• Does the work process involvehandling heavy, bulky or awkwarditems?• Is there a high product mix, withmany product change overs everyday?• Will employees work alone, backto-backor in teams?• Does the workstation requirepower tools, computer equipment,supplemental lighting orstorage space?sories that will help your operationbecome as safe and productive aspossible.ered through reconfigurable componentsthat keep pace with changesin your work processes. The saferwork environment provided throughergonomic design helps minimizethe risk of work-related injuries, soyou also minimize workers’ compensationclaims and lost days. Add itall together, and the value of anergonomically designed Lista workspacesolution is clear.29.5"Sitting29.5" worksurface height willaccommodate 99.5% of all maleand 99.9% of all female workers.StandingDetermine optimal worksurface heightdepending on the type of work beingperformed.Align ® and Arlink ® 8000 workstationworksurface heights can be easilyadjusted to accommodate the comfortand safety of your employees.7

Lista Workspace FurnitureTechnicians at ACD (AutomatedCircuit Design) in Richardson, TXdesign, fabricate and assemblecircuit boards on versatile Arlink ®8000 workstations. Testers atdouble-sided workstations takeadvantage of the Arlink 8000’sample electrical power andextensive worksurface space.Test instruments are stored outof the way on wire shelves.

FUNCTIONAL, ATTRACTIVE TECHNICAL FURNITURE FORA WIDE RANGE OF ELECTRONIC AND ASSEMBLY TASKSLista Workspace FurnitureArlink ® 8000 Workstation Features 15Arlink 8000 Workstation Trim Colors 16Arlink 8000 Workstation Configuration Options 17Arlink 8000 Workstation Easy-Order Combinations 18Arlink 8000 Workstation Worksurfaces 19Build Your Own Arlink 8000 Workstations 20Arlink 8000 Workstation Accessories 22Arlink 8000 Flow Racks 29Arlink 8000 Progressive Assembly Systems 30Arlink 8000 Utility and Parts Carts 30VSI (Vertical Space Integrator) Accessory System 31Align ® Adjustable Height Workstation 32Align Adjustable Height Workstation Easy-Order Combinations 34Align Adjustable Height Workstation Bases 35Align Adjustable Height Workstation Accessories 36Technical Electronic Workstations 38Technical Electronic Workstation Easy-Order Combinations 40Align and Technical Electronic Workstation Worksurfaces 42Technical Electronic Workstation Components 43Workstation and Workbench ESD Accessories 43How to Order Technical Electronic Workstations 45For laboratory cabinets and casework,see Lista’s General Storage Catalog.9

Lista Workspace Furniture Makes Any Workspace WorkNo matter what you’re workingon, Lista’s wide range of technicalworkspace furniture systemshave the variety, dur a bility andflexibility to meet your needs.Workcells for assembling pulse oximeters take advantage of the flexibleconfigurability of the Arlink ® 8000 system. Whether the task is progressiveassembly or piece work, mobile Arlink 8000 workstations canbe quickly and easily configured to accommodate workflow.Maximum ergonomic comfort andincreased productivity are hallmarksof the Align ® AdjustableHeight Workstation. Whateverthe ideal worksurface height forthe task at hand, the workstation’s16" vertical height adjustabilityis up (or down) to the job.Technical electronic workstations have the versa -tility to adapt to a wide range of tasks. At thismanufacturing facility for electric power systems,tech legs are combined with the VSI accessorysystem and integrated with a conveyor system formaximum productivity on the assembly line.10

Technical electronic workstationscan be outfitted with cabinetpedestals for easy access tostored tools and parts.Technical electronic workstations are ideally suitedfor a variety of assembly and testing tasks, includingstatic-sensitive operations and environments.Arlink 8000 uprights can be usedfor a wide range of tasks, includingas convenient, versatileshelving and storage.Align ® Adjustable Height Work -stations can be equipped for avariety of electronic, assemblyand light manufacturing tasks,including static-sensitive operations.The addition of the NexusAccessory System, with its widerange of accessories, allows eachworkstation to be equipped toexactly suit the work being done.11

Lista Arlink ® 8000 WorkstationsNonin, a manufacturer of physiological monitoring solutions, relies onArlink 8000 workstations throughout its Plymouth, MN facility. Singleanddouble-sided mobile workstations with optional footrests enablethe quick, effortless reconfiguration that medical device manufacturingdemands.

FULLY INTEGRATED, DURABLE AND CUSTOMIZABLEMODULAR SYSTEMS FOR PRODUCTIVE WORKSPACEArlink ® 8000 WorkstationsArlink 8000 Workstation Features 15Arlink 8000 Workstation Definite Positioning System ® 16Arlink 8000 Workstation Trim Colors 16Arlink 8000 Workstation Configuration Options 17Arlink 8000 Conveyor Workstations 17Arlink 8000 Workstation Easy-Order Combinations 18Arlink 8000 Workstation Worksurfaces 19Build Your Own Arlink 8000 Workstations 20Build Your Own Arlink 8000 Mobile Workstations 21Arlink 8000 Workstation Accessories 22Arlink 8000 Workstation Shelves 22Arlink 8000 Workstation Lighting 23Arlink 8000 Workstation Utility Accessories 24Arlink 8000 Workstation Hanging Cabinets and Drawers 25Arlink 8000 Workstation Overhead Cabinets 25Arlink 8000 Workstation Panels and Markerboard/Tackboards 25Arlink 8000 Workstation Parts Bin Rails 26Arlink 8000 Workstation Tool and Parts Holders 26Arlink 8000 Workstation ESD Accessories 27Arlink 8000 Workstation CPU Holder 27Arlink 8000 Workstation Footrests 27Arlink 8000 Workstation Keyboard Holder 27Arlink 8000 Workstation Pivoting Accessories 28Arlink 8000 Flow Racks 29Arlink 8000 Progressive Assembly Systems 30Arlink 8000 Utility and Parts Carts 30VSI (Vertical Space Integrator) Accessory System 3113

Arlink ® 8000 WorkstationsCompletely integrated andMaximum return on investmentEase of assemblyErgonomicsmodular, Arlink 8000 worksta-Arlink 8000 workstationsThe Arlink 8000 workstationWith an emphasis on ergo -tions ensure that you’ll alwaysfeature a unique column designoffers the industry’s fastest andnomics, the Arlink 8000 work-have the exact workstationthat provides a sturdy, flexiblesimplest set-up and reconfigu-station improves comfort,your work demands. With theirbackbone for your evolvingration. Virtually no hardware oreliminates wasted motion, andeasy reconfigurability, Arlinkneeds. Thanks to the system’stools are required, makingminimizes fatigue and strain.8000 workstations can beversatility and durability, thischanges efficient and frustra-altered for multiple functionsexceptional series of worksta-tion-free.and changes in your workflow.tions pays for itself quickly,This enduring adaptabilitywhile providing continuousmeans that you’ll have a cost-value for years to come.effective solution for all of yourassembly, repair and lightmanu facturing workstationThe Arlink 8000 work stationinstallation tool kitneeds, both today and in thefuture.PAINT COLORS – PLEASE NOTE!• Arlink 8000 workstationsand accessories are availablein Light Gray and Sandonly.• Other colors, includingother standard Lista colors,are available on request atan additional charge.• Accent trim for supportcolumns, lights, steelshelves and footrests(included with each workstation)is available ina choice of colors – seepage 16.ARLINK 8000 AND VSI ACCESSORIESARE NOT COMPATIBLE WITH NEXUSEase and flexibility when positioning system componentsare a hallmark of Arlink 8000 workstations.SYSTEM UPRIGHTS.14

Arlink ® 8000 Workstation FeaturesSimplicityAdaptabilitySecure storageClean room certification• Fast, easy assembly.Unique Definite Positioning System ®Hanging drawers and overheadArlink 8000 workstations have been• With our starter and adder sys-(see page 16) allows easy, securecabinets can be added anywherecertified for use in a CLASS 10,000tem, workstations can easily linkto create infinite layout options.• Workstations can be convertedfrom single- to double-sided atany time – quickly, easily andinexpensively.Modularity• Five standard section widths andfive standard column heights.• Section widths can be mixed andmatched to suit your needs.placement and reconfiguration ofaccessories.MobilityMobile workstations are easily relocated,allowing fast layout changes.VisibilityOptional task lighting providesillumination for the most exactingwork.you need secure storage for valuabletools, equipment, parts or personaleffects. Lista drawer storagecabinets also make excellent companioncabinets – see Lista’sGeneral Storage Catalog.Electrostatic controlElectrostatic controlproducts and accessories are avail-clean room per the USA FederalStandard 209E and CLASS 7 per ISO14644 Inter national Clean RoomStandard. For information on specifyinga clean room workstation,contact your Lista representative.AestheticsComponents are powder coated inattractive Light Gray or Sand (withStrengthable to meet most ESD-relatedother colors available on request),Made of high-strength, cold rolledrequirements.and a choice of ten trim colors forsteel, the system’s columns providea contemporary appearance.maximum structural integrity.Double-sided column– worksurfaces andaccessories can attachto either sideof columnOverhead lightingChoice of columnheightsEasily-repositionedaccessoriesVariety of utilitybeamsDecorative accent trimAdjustablework surfaces ina variety of sizesand materialsOutriggers forstabilityVariety of footrestsLeveling glides oroptional mobilebase15

Arlink ® 8000 Workstation SystemArlink 8000 workstationsMacro slots provide support forAccent trim colorsgive the user the greatest flexi-Microslotsheavy-duty components, such asPlastic accent trim for supportbility possible. Our uniqueworksurfaces and shelving. In thecolumns, lights, steel shelves andDefinite Positioning System ® ,case of adjacent workstation sec-footrests (included with each work-numerous footprint configura-tions, the macro slot is utilized bystation) is available in a choice oftions, and easy-to-assemblestarter and adder sections,Macroslotboth to save space and reduce systemcost. Components that attachcolors.mean you can easily adapt andto the macro slots are verticallyreconfigure your workstationsadjustable in 3" increments.as your needs evolve.Micro slots provide support forBrackets fit into either microslots or macro slots.lighter-duty components, such aspower beams and parts bin rails.COLORBlackCOLORBlueDefinite Positioning System ®Micro slots are located to the leftAn innovative assembly conceptand right of the macro slot, and pro-which features one macro and twovide maximum component place-micro slots on each side of a highstrength column, this approachment options. Components thatattach to the micro slots are verti-COLORBright BlueCOLORBurgundygreatly reduces the time and effortcally adjustable in 1" increments.needed to attach components to thesystem, while making highly efficientuse of space. Since columnsCOLORCOLORare double-sided, a single columnClassic BlueDark Bluemay be used by two back-to-backwork stations, as well as adjacentsections.COLORCOLORLight GrayRoyal BlueCOLORCOLORSandTeal16

Arlink ® 8000 Workstation Configuration OptionsFloor space utilizationMany workstation configura-Conveyor workstationsArlink 8000 workstations enabletions may also be ordered withThe Arlink 8000 family of con-you to achieve maximum productiv-mobile capabilities, enabling you toveyor workstation systems providesity per square foot. Our worksta-quickly and easily relocate entirecost-effective, high-efficiency work-tions can be designed in numerousworkstation groupings.flow management throughout yourconfigurations to meet any applica-Please contact your Lista repre-entire production stream, betweention. You can configure your workstationsto suit your needs today,and as future needs evolve.IN-LINE CONFIGURATIONsentative for additional configurationoptions.U CONFIGURATIONautomatic machines and in operationsincluding:• Manual assembly areas• Inspection• Testing• Rework• PackagingSelect from Arlink 8000 work -station options to best optimizeworkflow management, includingworksurfaces and accessories (tasklighting, power, air and data beams,shelving, parts bin racks, etc.).IN-LINE BACK-TO-BACK CONFIGURATIONSystems are available withX CONFIGURATIONsingle- or multi-level conveyor oreasily integrated with the conveyorof your choice.L CONFIGURATIONSingle sided – operator facesconveyor with standard worksurfaceDouble sided – operator faces conveyorwith standard worksurfaceT CONFIGURATIONDouble sided – operator facesconveyor with scalloped work -surfaceDouble sided – operator at 90˚to conveyor with standardwork surface17

Easy-Order Arlink ® 8000 WorkstationsThe workstation componentsshown on this page are pre-configuredto include our most popularand versatile Arlink 8000workstation styles. To design acustom workstation to suit yourexact needs, see pages 20-21.Arlink 8000 workstationsconsist of a starter section, andas many adder sections as youneed for your application.Select from single- or doublesidedstarters, adders, or cornersin all standard section widthsand heights. You may alsochoose either 28"- or 30"-deepworksurfaces in either plasticlaminate or static dissipativelaminate. Easy-Order sectionsinclude all accessories shown inthe charts to the right. To orderadditional accessories, pleasesee pages 22-28.How to order an Easy-OrderArlink 8000 workstationsectionFollow the 6 steps below for startersection and repeat for each addersection.1. Select Easy-Order sectionconfiguration.A-SS = single-sided starterA-SA = single-sided adderA-SC = single-sided corner adderA-DS = double-sided starterA-DA = double-sided adderA-DC = double-sided corner adder2. ■ Select section length.*30 = 30" long36 = 36" long48 = 48" long60 = 60" long72 = 72" long*corner adders 36" long only3. ■ Select section height.54 = 54" high*72 = 72" high84 = 84" high*54" high sections do not includelight assemblies4. ■ Select section depth.28 = 28" deep30 = 30" deep5. ■ Select worksurface material.SL = plastic laminateSD = static dissipative plasticlaminate6. ■ Select powder coat paintcolor.LG = Light GraySN = SandEXAMPLE: to order a starter singlesidedworkstation section that is 60"long, 84" high and 30" deep with aplastic laminate worksurface and Sandpaint, the part number would beA-SS608430SLSN.To order an adder single-sided workstationsection that is 48" long, 84"high and 30" deep with a plasticlaminate work surface and Sand paint,the part number would beA-SA488430SLSN.To order an adder single-sided cornersection that is 84" high and 30" deepwith a plastic laminate worksurfaceand Sand paint, the part number wouldbe A-SC368430SLSN. (When orderingan “L” shaped configuration, 2 startersmust be used with a corner adder.)A-SS Single-sided starterIncludes: 1 starter assembly (see page 20)1 footrest2 outriggers1 worksurface assembly1 single-sided power beam (15 amp)1 open wire shelf, 12" depth1 light fixture assembly1 parabolic light diffuserA-SA Single-sided adderIncludes: 1 adder assembly (see page 20)1 footrest1 outrigger1 worksurface assembly1 single-sided power beam (15 amp)1 open wire shelf, 12" depth1 light fixture assembly1 parabolic light diffuserA-SC Single-sided corner adderIncludes: 1 adder assembly, 36"1 outrigger1 corner worksurface assembly1 single-sided power beam (15 amp)1 open wire shelf, 12" depth1 light fixture assembly1 parabolic light diffuserA-DS Double-sided starterIncludes: 1 starter assembly (see page 20)2 footrests4 outriggers2 worksurface assemblies1 double-sided power beam (15 amp)2 open wire shelves, 12" depth2 light fixture assemblies2 parabolic light diffusersA-DA Double-sided adderIncludes: 1 adder assembly (see page 20)2 footrests2 outriggers2 worksurface assemblies1 double-sided power beam (15 amp)2 open wire shelves, 12" depth2 light fixture assemblies2 parabolic light diffusersA-DC Double-sided corner adderIncludes: 1 adder assembly, 36"2 outriggers2 corner worksurface assemblies1 double-sided power beam (15 amp)2 open wire shelves, 12" depth2 light fixture assemblies2 parabolic light diffusers18

Arlink ® 8000 Workstation WorksurfacesPlastic LaminateWorksurface AssembliesWorksurface is constructed of 1" thickmedium density particle board coveredon top and all sides with non-glarematte finish plastic laminate. The frontedge is contoured for comfort and chipresistance. The under side of the worksurfaceis sealed with a plastic tensionsheet to prevent moisture absorption,warping and shedding. Threaded steelinserts facilitate easy assembly andreconfiguration. Assembly includes2 worksurface support brackets and2 worksurface support beams.Color:• Dove gray when used with LightGray workstations• Antique white when used withSand workstationsPART NO. LENGTH24" deep4551 30"4351 36"4451 48"4651 60"4751 72"28" deep8729 30"8924 36"8923 48"8620 60"8715 72"30" deep8730 30"SA101 36"SA105 48"SA109 60"SA113 72"32" deep8731 30"SA102 36"SA106 48"SA110 60"SA114 72"34" deep8732 30"SA103 36"SA107 48"SA111 60"SA115 72"36" deep8733 30"SA104 36"SA108 48"SA112 60"SA116 72"Static Dissipative LaminateWorksurface AssembliesWorksurface is the same as the plasticlaminate worksurface, but with plasticlaminate that provides a controlledpath to ground for the dissipation ofstatic electricity. The worksurface isprovided with a grounding kit thatmust be used to provide proper protectionfor components and personnel.Static dissipative value for the materialis 10 6 - 10 9 . Assembly includes 2 worksurfacesupport brackets and 2 worksurfacesupport beams.Color:• Dove gray when used with LightGray workstations• Almond when used with SandworkstationsPART NO. LENGTH24" deep4551SD 30"4351SD 36"4451SD 48"4651SD 60"4751SD 72"28" deep8754 30"8994 36"8992 48"8622 60"8716 72"30" deep8755 30"SA155 36"SA159 48"SA163 60"SA167 72"32" deep8756 30"SA156 36"SA160 48"SA164 60"SA168 72"34" deep8757 30"SA157 36"SA161 48"SA165 60"SA169 72"36" deep8758 30"SA158 36"SA162 48"SA166 60"SA170 72"Also available:• Butcher block (1 1 ⁄4" thick)• Phenolic resin (1" thick)• Stainless steel (1 1 ⁄8" thick)• Galvanized steel (1 1 ⁄8" thick)Corner WorksurfaceAssembliesConstruction is the same as otherworksurfaces. Length is 36" or 48".Assembly includes required brackets.PART NO. WORKSURFACE L X DPlastic laminate4951 36" x 24"8812 36" x 28"SA200 36" x 30"SA201 36" x 32"SA202 36" x 34"SA203 36" x 36"8864 48" x 28"8800 straight back 28"8806 round back 28"Static dissipative laminate4951SD 36" x 24"8814 36" x 28"SA204 36" x 30"SA205 36" x 32"SA206 36" x 34"SA207 36" x 36"8865 48" x 28"8802 straight back 28"8808 round back 28"WorksurfaceSupport LegsSupport legs for worksurface,adjustable from 28"to 34" high. 8094 is foruse with corner worksurfaceassemblies. 8265attaches to front supportbeam of worksurface toincrease load capacity or dampenvibration (shown to right).PART NO. DESCRIPTION8094 corner worksurface leg8265 worksurface front support legSplit BaySupportBracketsSplit bay workstationspans 2 sections with1 worksurface. Select worksurfaceassembly equal to the length of thecombined sections. Select a split baybracket to join worksurface assemblyto center column.PART NO. DEPTH8102 28"-32"8115 34"-36"Material TransferWorksurfacesMaterial transfer worksurfaces offer acost-effective, efficient means of workflowmanagement for products or palletsin assembly, repair and reworkenvironments.Through the use of pop-up balls, popuppads, insert wheels, or insert rollers,worksurfaces are customized to accommodatethe transfer needs of yourproduct and process. Material transferworksurfaces are often a lower costalternative to conveyors and cangreatly improve the efficiency, safetyand ergonomics associated with workingon and moving a product. Theunique ability to integrate Lista’s Arlink8000 components and accessories suchas task lighting, wire and steel shelving,drawers and cabinets providesunsurpassed flexibility.Material transfer worksurfaces may beintegrated with all Arlink 8000 sectionsizes, worksurface depths and materials.Please contact your Lista representativefor help in configuring a systemand providing the solution best suitedto your requirements.19

Build-Your-Own Arlink ® 8000 WorkstationsDesigning a custom Arlink8000 workstation is a simpleand straightforward process.Start by selecting the structuralelements (starter and adderassemblies), add outriggers,choose work surface(s), and addthe accessories that fulfill yourneeds.In addition to the columnheights shown, columns can becustom cut to any size yourequest.1. Select starter assembly (length andheight)The starter assembly is the first component for each workstationand includes 2 columns with outer and inner trim, and aclosed stabilizer panel. Optional open stabilizer panel may beordered for full access from the rear of the workstation. Tospecify open stabilizer in place of closed stabilizer, add theprefix "O" to the part number.SECTION LENGTH30" 36" 48" 60" 72"COLUMNHEIGHT STARTER ASSEMBLY PART NUMBER30" 8692C30 8897C30 8896C30 8601C30 8702C3036" 8692C36 8897C36 8896C36 8601C36 8702C3654" 8692 8897 8896 8601 870272" 8694 8901 8900 8600 870084" 8696 8903 8902 8603 87048044 8040 80413. Select outriggersChoose from 5 outrigger designs:8044 for worksurfaces 28"-32" deep and shelving20"-22" deep8040 heavy-duty, for worksurfaces 28"-32" deep andshelving 20"-22" deep8041 for worksurfaces 34"-36" deep8043 for rear of single-sided applications, to increasestability8042 for shelving 12"-18" deepOrder 1 outrigger for each column used (2 per column fordouble-sided applications). For optional swivel footrests, seepage 27.For Applications Using WorksurfacePART NO. OUTRIGGER DEPTH USE WITH WORKSURFACE DEPTH8044* 22" 28", 30", 32", swivel footrest8040 23" 28", 30", 32"8041* 30" 34", 36", swivel footrest8043 4" 28", 30", 32", 34", 36"*slotted to accept optional swivel footrest (see page 27)For Applications Using Shelving OnlyPART NO. OUTRIGGER DEPTH USE WITH SHELF DEPTH8040 23" 20", 22", 24"8042 15" 12", 14", 16", 18"8043 4" 12", 14", 16", 18", 20", 22", 24"4. Select worksurface assemblySee page 19.5. Select accessoriesSee pages 22-28. For optional column caps see page 31.2. Select adder assemblies (length andheight)The adder assembly for each adjoining section includes a singlecolumn with outer and inner trim, and a closed stabilizerpanel. Optional open stabilizer panel may be ordered for fullaccess from the rear of the workstation. To specify open stabilizerin place of closed stabilizer, add the prefix "O" to thepart number.SECTION LENGTH30" 36" 48" 60" 72"COLUMNHEIGHT ADDER ASSEMBLY PART NUMBER30" 8693C30 8899C30 8898C30 8606C30 8703C3036" 8693C36 8899C36 8898C36 8606C36 8703C3654" 8693 8899 8898 8606 870372" 8695 8906 8905 8605 870184" 8697 8908 8904 8608 87056. Select paint colorChoose from Light Gray (LG) or Sand (SN).7. Select trim colorSee page 16.20

Build-Your-Own Mobile Arlink ® 8000 WorkstationsAll Arlink 8000 workstationsections can be ordered in amobile configuration, providingSINGLE-SIDED STARTER DOUBLE-SIDED STARTER SINGLE-SIDED ADDER DOUBLE-SIDED ADDER1. Select mobile starter baseBase consists of mobile base frame, 2 swivel 4" locking castersand 2 swivel 4" non-locking casters, mobile outriggersand all required hardware. Single-sided base is 34" deep;double-sided base is 54" deep. Adds 7" to overall columnheight. For optional swivel footrests, see page 27.SECTION LENGTH30" 36" 48" 60" 72"Single-sided8313SS 8969SS 8968SS 8668SS 8768SSDouble-sided8313DS 8967DS 8974DS 8669DS 8769DS3. Select mobile adder baseBase consists of mobile base frame, 1 swivel 4" locking castersand 1 swivel 4" non-locking caster, mobile outrigger(s)and all required hardware. Adder bases must always bemounted on the right-hand side of a single-sided starter base.Adds 7" to overall column height. For optional swivelfootrests, see page 27.SECTION LENGTH30" 36" 48" 60" 72"Single-sided8313SA 8969SA 8968SA 8668SA 8768SADouble-sided8313DA 8967DA 8974DA 8669DA 8769DAfor easy relocation and smoothmovement of workstations.Stationary Arlink 8000 work -stations can easily be retrofittedto mobile configurations whendesired.Designing a custom Arlink8000 mobile workstation is asimilar process to designing astationary workstation. Start by2. Select matching starter assemblyThe starter assembly includes 2 columns with outer and innertrim and a closed stabilizer panel. Optional open stabilizerpanel may be ordered for full access from the rear of theworkstation. To specify open stabilizer in place of closedstabilizer, add the prefix "O" to the part number.SECTION LENGTH30" 36" 48" 60" 72"COLUMNHEIGHT STARTER ASSEMBLY PART NUMBER30" 8692C30 8897C30 8896C30 8601C30 8702C3036" 8692C36 8897C36 8896C36 8601C36 8702C3654" 8692 8897 8896 8601 870272" 8694 8901 8900 8600 870084" 8696 8903 8902 8603 87044. Select matching adder assemblyThe adder assembly for each adjoining section includes a singlecolumn with outer and inner trim and a closed stabilizerpanel. Optional open stabilizer panel may be ordered for fullaccess from the rear of the workstation. To specify open stabilizerin place of closed stabilizer, add the prefix "O" to thepart number.SECTION LENGTH30" 36" 48" 60" 72"COLUMNHEIGHT ADDER ASSEMBLY PART NUMBER30" 8693C30 8899C30 8898C30 8606C30 8703C3036" 8693C36 8899C36 8898C36 8606C36 8703C3654" 8693 8899 8898 8606 870372" 8695 8906 8905 8605 870184" 8697 8908 8904 8608 87055. Select worksurface assemblySee page 19 (maximum depth is 30").6. Select accessoriesSee pages 22-28. For optional column caps see page 31.7. Select paint colorChoose from Light Gray (LG) or Sand (SN).choosing a base (either singlesidedor double-sided), selectstructural elements (starter andadder assemblies), choosework surface(s)*, and add theaccessories that fulfill yourneeds.In addition to the columnheights shown, columns can becustom cut to any size yourequest.*Maximum worksurface depth 30".8. Select trim colorSee page 16.21

Arlink ® 8000 Workstation ShelvesOpen Wire ShelvesWelded steel wire shelf has chromeplated finish. Adjusts from horizontalto 15° and 30° inclination. Includesfront lip (can be oriented up or down).Weight capacity 150 lbs. 12" deep.Mounts in macro slots, adjusts verticallyin 3" increments.PART NO.LENGTH8884 30"8927 36"8925 48"8625 60"8725 72"Lab Style Wire ShelvesLab style wire shelves are 9" deepto accommodate normal-sized workboxes and sample trays. They havecross wire welded on underside ofshelf, so work boxes slide easily alonglength of shelf when front lip is facingup. Adjusts from horizontal to 15° and30° inclination. Weight capacity 150lbs. Mounts in macro slots, adjustsvertically in 3" increments.PART NO.LENGTH4581 30"4381 36"4481 48"4681 60"4781 72"Wire ShelfDividerShelf divider snaps intoplace. For 12" deepopen wire shelf only.PART NO. HEIGHT8145 12"Steel ShelvesSturdy steel shelf adjusts from horizontalto 15° and 30° inclination. Weightcapacity 300 lbs. Includes color trim(color matches column trim). Mountsin macro slots, adjusts vertically in 3"increments.PART NO.LENGTH12" deep8285 30"8321 36"8320 48"8482 60"8592 72"16" deep8287 30"8341 36"8340 48"8484 60"8593 72"20" deep8289 30"8361 36"8360 48"8486 60"8594 72"Steel ShelfDividersMounts on shelfwith 2 screws.8" tall.PART NO. DEPTH8319 12"8339 18"8349 20"Sloping Document Shelves15° vertical steel shelf is 12" high andhas a 2" lip to hold books, manuals,drawings, etc. Mounts in micro slots,adjusts vertically in 1" increments.PART NO. LENGTH8298 30"8316 36"8315 48"8455 60"8590 72"Worksurface Back StopsSteel back stop prevents items fromrolling off worksurface. 3" high.Mounts in micro slots, adjusts verticallyin 1" increments.PART NO. LENGTH8449 30"8461 36"8463 48"8466 60"8468 72"Variable Angle ShelvesShelf mounts in forward or set backposition. Adjusts variably from totallyflat to 25° angle and has a full perimeterlip. 150 lb. capacity. Shelf withoutlip is similar to variable angle shelf butincludes pre-punched holes to acceptvertical wire dividers (see below).Mounts in micro slots, adjusts verticallyin 1" increments.WITH LIP WITHOUT LIP LENGTH18" deep8312 4583 30"8328 4383 36"8327 4483 48"8497 4683 60"24" deep8314 4584 30"8355 4384 36"8354 4484 48"Shelf Dividers for VariableAngle Shelves without LipsDivider is 1 ⁄4" diameter galvanized wirethat fits into pre-punched holes in theshelf. No hardware required. Depthmust match shelf depth.PART NO.HEIGHT X DEPTH4168 6" x 18"4172 6" x 24"4169 10" x 18"4173 10" x 24"4170 18" x 18"4174 18" x 24"Steel Shelf LipsShelf lip mounts to front of shelf andcan be positioned at height of either5⁄8" or 1 1 ⁄2".PART NO. FOR SHELF LENGTH8311 30"8386 36"8387 48"8448 60"8595 72"22

Arlink ® 8000 Workstation Lighting AccessoriesDual Lamp FluorescentLight Fixture AssembliesEconomical twin tube fluorescent lightfixture. Uses energy-saving T8 lampsand electronic ballasts. Comes completewith (2) 32 watt lamps and parabolicdiffuser. Color trim attaches tofront lip of fixture. Includes 9' powercord. Mounts in macro slots, adjustsvertically in 3" increments.• 14" depth is suited for placementunder overhead cabinets• 19" depth is standard• 26" depth is suited for use withextra-deep worksurfacesPART NO.LENGTHFixture with 14" deep bracket8511S 30"8533S 36"8534S 48"8655S 60"8784S 72"Fixture with 19" deep bracket8511L 30"8533L 36"8534L 48"8655L 60"8784L 72"Fixture with 26" deep bracket8511XL 30"8533XL 36"8534XL 48"8655XL 60"8784XL 72"Switchable 2/4 LampFluorescent LightsSwitchable 2 or 4 tube fluorescent lightfixture allows user to select light intensityaccording to the task. Uses energysaving T8 lamps and electronic ballasts.Comes complete with (4) 32 wattlamps and acrylic diffuser. Fixture tiltsup or down 10°. Includes 9' power cord.Mounts in macro slots over worksurface,adjusts vertically in 3" increments.• 14" depth is suited for placementunder overhead cabinets• 19" depth is standard• 26" depth is suited for use withextra-deep worksurfacesPART NO. LENGTHFixture with 14" deep bracket4375S 36"4475S 48"4675S 60"4775S 72"Fixture with 19" deep bracket4375L 36"4475L 48"4675L 60"4775L 72"Fixture with 26" deep bracket4375XL 36"4475XL 48"4675XL 60"4775XL 72"Parabolic DiffusersFor 2/4 lamp lights. Optional chromeplated plastic parabolic grid directs lightonto work surface while eliminatingglare on adjacent workstations.Replaces acrylic diffuser that is includedwith light fixture assembly.PART NO. LENGTH4376 36"4476 48"4676 60" and 72"23

Arlink ® 8000 Workstation Utility AccessoriesHorizontal Power BeamsAvailable in single- or double- sidedconfig uration. Each side has 8 receptacles,lighted power switch and 15 ampor 20 amp breaker (20 amp availablein single-sided only). Includes 7 1 ⁄2'power cord. Mounts in micro slots,adjusts vertically in 1" increments.PART NO. LENGTHSingle-sided 15 amp8876 30"8941 36"8940 48"8640 60"8740 72"Double-sided 15 amp8877 30"8946 36"8945 48"8645 60"8741 72"Single-sided 20 amp8875 30"8959 36"8991 48"8657 60"8743 72"Power Beams with LightSwitchAvailable in single- or double-sidedconfig uration. Provided with separateon/off switch for light, which allowsremainder of beam to be left powered.7 outlets per side. 15 amp standard.Includes 7 1 ⁄2' power cord. Mounts inmicro slots, adjusts vertically in 1"increments.PART NO. LENGTHSingle-sided8860 30"8937 36"8930 48"8647 60"8745 72"Double-sided8862 30"8944 36"8931 48"8648 60"8746 72"Vertical PowerStripsAvailable in 15 amp or20 amp, and GFCI.Lighted on/off switch,6' cord with groundedplug and circuit breakerincluded. Painted black.Mounts vertically tofront and back of microslots, adjusts vertically in1" increments. Bracket and hardwaresupplied.PART NO. DESCRIPTION8942 15 amp with 6 outlets8943 20 amp with 6 outlets8947 15 amp GFCI with 6 outlets8948 20 amp GFCI with 6 outletsData BeamsModular data beams feature 4 duplexstyleoutlets with 8 ports that acceptmodular snap-in/snap-out jacks or connectorsfor data, video, or audio connectivity.Beams come with outlets, butjacks/connectors must be purchasedseparately. On-site wiring for ports isresponsibility of customer. Mounts inmicro slots, adjusts vertically in 1"increments. Contact Lista for additionalspecifying assistance.PART NO. LENGTHSingle-sided8858 30"8870 36"8871 48"8653 60"8752 72"Double-sided8859 30"8872 36"8873 48"8652 60"8753 72"Cable TraysTray neatly gathers bundles of loosehorizontal wires and provides randomaccess for cable routing along itslength. Painted black. Mounts in microslots, adjusts vertically in 1" increments.PART NO. L X D X H8302 30" x 4" x 3"8389 36" x 4" x 3"8390 48" x 4" x 3"8498 60" x 4" x 3"8597 72" x 4" x 3"Air BeamsAir beam is supplied with:• (1) 1 ⁄4" NPT female inlet on top• (2) 1 ⁄4" NPT female outlets on front(single-sided) and (2) 1 ⁄4" NPTfemale outlets per side (doublesided)for 30" beams• (3) 1 ⁄4" NPT female outlets on front(single-sided) and (3) 1 ⁄4" NPTfemale outlets per side (doublesided)for 36", 48", 60" and 72"beams• (2) end mounted jumpersMounts in micro slots, adjusts verticallyin 1" increments.PART NO. LENGTHSingle-sided8879 30"8949 36"8950 48"8951 60"8750 72"Double-sided8853 30"8977 36"8978 48"8660 60"8751 72"Air Supply BracketSupplied with (1) 1 ⁄4"NPT female outlet.Mounts under worksurfaceto worksurfacesupport beam.Single outlet.PART NO.4866Vertical Cable ClipNeatly gathers bundlesof loose vertical wires.Painted black. Mountsin micro slots, adjustsvertically in 1" increments.PART NO. SIZE8391 3" x 3"24

Arlink ® 8000 Hanging Drawers, Overhead Cabinets and PanelsHanging Cabinets16 3 ⁄4" (426mm) wide x 19 1 ⁄4"(491mm) deepThese cabinets provide convenientbelow-worksurface storage where onlya few drawers are needed. Cabinet ismounted under worksurface to worksurfacesupport beams and can berepositioned to any horizontal position.50 lb. (22.5kg) weight capacity perdrawer. Usable inside dimensions:13 1 ⁄4" (338.5mm) wide x 16 15 ⁄16"(430mm) deep. Drawers do not acceptLista partitions and dividers.Pelican ® DrawerSecure storage for legal hanging files orpersonal effects, plus segmented trayfor pencils, pens, paper clips etc.Designed to allow easy clearance forworker’s knees. Thermo-formed polystyrenebody with polyurethane drawerface. Mounts under worksurface toworksurface support beams. Drawercan slide to any horizontal position.Includes concealed ball bearing slidesand fully integrated locking system.PART NO. W X D X H8845 19 1 ⁄2" x 24" x 10"Overhead CabinetsSteel cabinet with retractable lockingdoor. Includes mounting brackets, lockand 2 keys. Keyed-alike or master locksystems are available. Mounts in microslots, adjusts vertically in 1" increments.PART NO. L X D X H8297 30" x 15" x 16"8956 36" x 15" x 16"8955 48" x 15" x 16"8650 60" x 15" x 16"8760 72" x 15" x 16"Modesty PanelsSteel or fabric-covered modesty panelacts as a privacy screen between double-sidedassemblies (or single-sidedwhere required). Steel panels can beused as fill-in panel or magnet panel tohold instructions or drawings. Fabriccoveredmodesty panel acts as tackboardand sound dampener. Standardfabric color is gray. Other colors availableupon request. Mounts in microslots, adjusts vertically in 1" increments.PART NO. LENGTH10" steel panel8137 30"8032 36"8030 48"8452 60"8581 72"20" steel panel8138 30"8033 36"8031 48"8453 60"8582 72"20" fabric-covered panel8139 30"8036 36"8048 48"8462 60"8586 72"PART NO. HEIGHT DRAWERS8614 5" (1) 2 3 ⁄4"8619 8" (1) 5 3 ⁄4"8626 8" (2) 2 3 ⁄4"8634 13 15 ⁄16" (1) file*8639 13 15 ⁄16" (2) 5 3 ⁄4"8658 19 7 ⁄8" (1) 5 3 ⁄4"+(1) file*8664 19 7 ⁄8" (3) 5 3 ⁄4"*file drawer includes file hangersTote BoxSlides into tote box holder whichmounts under worksurface, and canslide to any horizontal position. Comeswith tote box holder and hangers.PART NO. W X D X H8998 11" x 17" x 6"Pegboard PanelsSturdy painted steel pegboard panel,ideal for hanging tools, etc. 18" high.Mounts in micro slots, adjusts verticallyin 1" increments.PART NO. LENGTH8333 30"8334 36"8335 48"8336 60"8337 72"For companion stationary andmobile drawer storage cabinets,see pages 61-64 and 67-70, orLista’s General Storage Catalog.Louvered PanelsSturdy painted steel louvered panel,holds hanging plastic bin boxes, tool orsupply holders. 18" high. Mounts inmicro slots, adjusts vertically in 1"increments.PART NO. LENGTH8442 30"8443 36"8444 48"8445 60"8447 72"ReversibleMarkerboard/TackboardsTwo-sided reversible board. Featureswhite magnetic markerboard on 1 sideand gray fabric tackboard on the other.Also functions as privacy panel andsound dampener. 30" high. Mountsin micro slots, adjusts vertically in1" increments.PART NO. LENGTH8771 30"8772 36"8773 48"25

Arlink ® 8000 Workstation Storage and Tool AccessoriesLight-Duty Parts Bin RailsLight duty parts bin rail is ideal forsmaller / lighter components and wherespace efficiency is a priority. Threedepths provide for compact tieredplacement and allow access to all binswithout interference. Chrome finish.Mounts in micro slots, adjusts verticallyin 1" increments. (Bins not included –see page 28.)PART NO. LENGTH2" deep8293 30"8243 36"8240 48"8478 60"8575 72"4" deep8294 30"8244 36"8241 48"8479 60"8576 72"6" deep8295 30"8245 36"8242 48"8480 60"8577 72"Utility BinsFull length steel bin holds tools, bottles,wipes, reeled solder dispenser, etc.Front edge can be used as a parts binrail. Mounts in micro slots, adjusts verticallyin 1" increments.PART NO. L X D X H8299 30" x 4" x 2"8247 36" x 4" x 2"8246 48" x 4" x 2"8446 60" x 4" x 2"8578 72" x 4" x 2"Lockable Tool BoxesFull length steel tool box securelystores tools and other valuables. Comeswith lock and key. Mounts in microslots, adjusts vertically in 1" increments.PART NO. L X D X H8300 30" x 4" x 2"8205 36" x 4" x 2"8204 48" x 4" x 2"8464 60" x 4" x 2"8587 72" x 4" x 2"Tool andAccessory HoldersTool and accessory holders add convenienceto the workplace. They hang onparts bin rail or utility bin and can bepositioned for easy reach.PART NO. DESCRIPTION SIZE8277 tool holder 3" x 5"8276 solder spool holder 5" x 5"8281 bottle holder 3" insidediameter8275 Kim Wipe holder 5" x 5"Airgun HolderMounts to worksurfacesupport beam.1 1 ⁄2" x 1 1 ⁄2" with1" diameter hole.PART NO.4863Wire holderTool Glide Track andTrolley AssembliesSmooth-moving glide keeps electricand pneumatic tools properly positioned.If used in conjunction with fluorescentlight assembly, glide trackmounts on brackets for fluorescentlights. If used alone, mounting bracketsmust be ordered separately (see below).PART NO. LENGTH8958 30"8975 36"8976 48"8633 60"8728 72"Additional tool trolley8184Track Mounting BracketsUsed to mount tool track when a lightfixture assembly is not used or needed.Come in pairs.PART NO. DEPTH8199 14"8196 19"8182 26"Wire guideHeavy-Duty Parts Bin RailsHeavy duty parts bin rail holds heavieritems such as hardware, fittings, etc.and is easily adjustable for ergonomicaccess. It can be mounted parallel tothe worksurface or at a 15° angle.Mounts in micro slots, adjusts verticallyin 1" increments. (Bins not included –see page 28.)Wire Holder AssembliesAssembly includes support brackets(pair) and wire holder – 3 ⁄4" tube withthreaded inserts. Mounts in micro slots,adjusts vertically in 1" increments.PART NO. LENGTH8886 30"8928 36"8929 48"8685 60"8785 72"PART NO. LENGTH8223 30"8225 36"8226 48"8475 60"8546 72"Wire GuidesChrome plated bar with several holes,guides wire on the job without tanglingor de-railing. Mounts in micro slots,adjusts vertically in 1" increments.26PART NO. LENGTH8301 30"8274 36"8273 48"8471 60"8583 72"

Arlink ® 8000 Workstation ESD Products and Miscellaneous AccessoriesWrist Strap and GroundBlockMountsunder work -surface toworksurfaceor supportbeams. Dualreceptaclesfor 2 wriststraps.PART NO. DESCRIPTIONSC12 ground blockSC15 wrist strap with 6' coil cord** with 1 megohm resistorCPU HolderAllows CPU to bemounted underworksurface (off offloor). Mountsunder worksurfaceto worksurfacesupport beams.PART NO.W X D X H8440 9 1 ⁄2" x 18" x 20"Swivel FootrestsDrops into slots on 8044 and 8041slotted out riggers. Adjustable to suitworker at individual work station.Includes color trim.PART NO. LENGTH8885 30"8911 36"8910 48"8610 60"8710 72"Keyboard Holder withMouse TrayTiltable keyboard holder allows computerkeyboard to be stored underworksurface when not in use. Includesswivel pull-out mouse pad which canbe attached to either right or left side.PART NO.L X WCommon Point GroundBlockTwo connectionsides – one sideconnects to a1 megohm resistor,the otherside bypasses the resistor and connectsdirectly to ground. Includes 8' cord.PART NO.SC14Ground KitsKit is supplied with all static dissipativeworksurfaces or shelves. Includes attachinghardware.PART NO.DESCRIPTIONFreestanding FootrestsErgonomic footrest provides supportfor user’s feet. Height adjustable from3" - 12". Footrest platform is 15" deepx 21 3 ⁄4" wide, and adjusts from totallyflat to a 25° angle. Includes ribbed mat.PART NO. DESCRIPTION8909 not static dissipative8909SD includes ground snap for staticdissipative environments8451 21" x 10"SC10worksurface kit with 8' cord*SC30shelf kit with 6' cord*** with 1 megohm resistor** without 1 megohm resistor27

Arlink ® 8000 Workstation Pivoting AccessoriesMicro SlotUniversalMountingBracketBracket is welded steel.Mounts in micro slots,adjusts vertically in 1"increments. For attachingarticulating arm to column. Mustbe ordered separately.PART NO. FOR ARTICULATING ARMS8406 8410, 8409Heavy-DutyUniversalMountingBracketBracket is weldedsteel. Bolts onthrough column andadjusts vertically in3" increments. For attaching articu -lating arm to column. Must be orderedseparately.PART NO. FOR ARTICULATING ARMS8423 8410, 8409Monitor Shelves withKeyboard HolderHolds computer monitor. Includesretractable wire keyboard holder. 75 lb.capacity. Requires universal mountingbracket (not included).PART NO. DESCRIPTION8878 12 3 ⁄8" wide x 12 3 ⁄8" deep8838 with double articulating armOptional Mouse TrayMouse tray attaches to monitor shelfwith keyboard holder (above) to holdcomputer mouse and/or mouse pad.Ordered separately.Equipment ShelvesHolds a variety of customer-suppliedequipment or tools. 75 lb. capacity.Requires universal mounting bracket(not included).PART NO. DESCRIPTION8857 12 3 ⁄8" wide x 12 3 ⁄8" deep8839 with double articulating armAccessory ShelvesFor easy access to small tools, instruments,parts, etc. 21 1 ⁄4" wide x 7 3 ⁄8"deep. 75 lb. capacity. Requires universalmounting bracket (not included).Ribbed mat optional.PART NO. DESCRIPTION8887 accessory shelf8765 with double articulating arm8759 ribbed rubber matDocument HoldersFor displaying papers, plans, etc.Includes lip for pencils, pens, etc.Requires universal mounting bracket(not included).PART NO. DESCRIPTION8666 11 7 ⁄8" wide x 13 3 ⁄4" high8776 with double articulating armLarge Document HoldersFor displaying large documents, andopen binders and books. Includes lip forpencils, pens, etc. Requires universalmounting bracket (not included).PART NO. DESCRIPTION8670 23 5 ⁄8" wide x 13 3 ⁄4" high8786 with double articulating armPART NO.DESCRIPTION28Articulating ArmTubular steel arm is 18" overall length.Weight capacity is 75 lbs. Can mountleft or right, adjusts vertically in 3"increments. Included with accessories.Does not include mounting bracket.PART NO. FOR MOUNTING BRACKETS8410 8406, 8423Double Articulating ArmTwo 8" tubular steel arms, linkedtogether to provide an additionalarticulation point. 50 lb. capacity.Can mount left or right, adjusts verticallyin 3" increments. Included withaccessories as shown. Does not includemounting bracket.PART NO. FOR MOUNTING BRACKETS8409 8406, 84238895 9 1 ⁄2" wide x 7 5 ⁄8" deepFlat Panel Monitor ArmsFor attaching flat panel monitor toupright. 17 1 ⁄2 lb. capacity. Mounts inmacro slots, adjusts vertically in 3"increments. Includes mounting bracket.• 8415 swings left and right, and has2 articu lating points.• 8628 also includes a 9" extenderwhich allows positioning of monitorscreen away from adjacent accessories.PART NO. DESCRIPTION8415 attaches to column8628 includes 9" bracket extenderBin ContainerHolds 3 rows of plastic bins for easyaccess to parts and components (binsnot included – see chart to right).Interior space per shelf is 20" wide x6" deep. Top shelf is 3 1 ⁄4" high, secondand third shelves are 3 3 ⁄4" high.50 lb. capacity. Requires accessory shelf(above) for support (not included), orcan be used freestanding. Requires universalmounting bracket (not included).PART NO.8888Task Light BracketSturdy weldedsteel bracketmounts in microslot with 1 ⁄2"diameter hole for task light.PART NO. LENGTH8130 9"8132 15"Parts Bin RackHolds industry-standard plastic partsbins (not included – see below).Requires universal mounting bracketand 8410 or 8409 swing arm (notincluded).PART NO. DESCRIPTION8432 18" wide x 10" highParts Bin BoxesBlue plastic bin fits inrack or on rail andslides to position.Con duc tive bin is black.PART NO. DIMENSIONSNon-conductive8253 4 1 ⁄2" W x 4" D x 3" H8254 5 1 ⁄2" W x 4" D x 3" H8255 7 1 ⁄2" W x 4" D x 3" HConductive8252 4 1 ⁄2" W x 4" D x 3" H8250 5 1 ⁄2" W x 4" D x 3" H8251 7 1 ⁄2" W x 4" D x 3" H

Arlink ® 8000 Flow RacksArlink 8000 Flow RacksArlink 8000 flow racks sections areavailable in 4 standard widths from30" to 60". Flow racks are heightadjustable in 1" increments. The flowrack angle is adjustable. 1400 lb.weight capacity.Arlink 8000 Flow RackShelf AssembliesShelf assembly includes roller tracks andguides as shown. 3" high, 48" deep.600 lb. weight capacity. For additionalroller tracks and guides, see chart toright.PART NO. WIDTH INCLUDESFR30 30" 4 roller tracks, 1 guideFR36 36" 4 roller tracks, 1 guideFR48 48" 6 roller tracks, 2 guidesFR60 60" 6 roller tracks, 2 guidesArlink 8000 Flow RackShelf AccessoriesShelves are slotted on 1 1 ⁄2" incrementsto accept roller tracks andguides. Guides separate sections.Rollers are 11 ⁄16" wide; tracks are1" wide. Two rollers are recommendedfor rows up to 15" wide, and 3 or morefor wider rows.PART NO.FRTRFRGUFRCPDESCRIPTIONroller trackroller guidereplacement clipFlow racks can be used tostage and deliver parts utilizinggravity, reducing material handlingtime and costs. Bins ortotes are loaded on flow rackframes from the rear, and asoperators remove one from thefront, a new bin glides forwardon rollers. Similarly, flow rackframes can be inclined awayfrom an operator to allowremoval of completed work.Flow racks are constructed utilizingthe same Starter and Addersystem common to all Arlink 8000workstations. Worksurfaceassemblies and accessories asArlink 8000 Flow RackStarter AssembliesConsists of 2 starter assemblies, 2 outriggers,1 flow rack shelf assembly and4 connectors.shown in this catalog can beadded to create a complete partspresentation and integratedworkstation system. Ball transferPART NO.72" highFRS3072FRS3672FRS4872FRS607284" highFRS3084FRS3684SIZE30" wide x 48" deep36" wide x 48" deep48" wide x 48" deep60" wide x 48" deep30" wide x 48" deep36" wide x 48" deeptables, other material handlingworksurfaces (see page 19) orconveyors (see page 17) may alsobe integrated into the worksurfaceas needed. Flow racks can beFRS4884FRS608448" wide x 48" deep60" wide x 48" deepmade mobile by the addition ofcaster sets.Arlink 8000 Flow RackAdder AssembliesConsists of 1 adder assembly, 1 out -rigger, 1 flow rack shelf assembly and2 connectors.Flow rack sections may bejoined side by side, using Starterand Adder assemblies to achievePART NO.SIZEany overall length and combina-72" highFRA307230" wide x 48" deeption of section sizes.FRA367236" wide x 48" deepFRA487248" wide x 48" deepFRA607260" wide x 48" deep84" highFRA308430" wide x 48" deepFRA368436" wide x 48" deepFRA488448" wide x 48" deepFRA608460" wide x 48" deep29

Arlink ® 8000 Progressive Assembly Systems, Utility and Parts CartsProgressive Assembly SystemDesigned for transportationof circuit boards or other panelizeditems, not to exceed 15"wide and 3 ⁄8" thick. Two versionsare available.Shelf Mount ProgressiveAssembly SystemsConsists of 2 aluminum slide rails,2 channel rails, 2 joiner pins and1 chrome plated part trough. Shelvesmust be ordered separately (seepage 22).PART NO. SHELF DEPTH36" wide shelf8936-20 20"8936-22 22"48" wide shelf8935-20 20"8935-22 22"60" wide shelf8637-20 20"Bench Tops for ProgressiveAssembly SystemConsists of 2 steel end supports (leftand right), 2 channel rails, 1 stiffenerpanel, 2 aluminum slide rails and2 joiner pins. Base footprint size36" wide x 20" deep.PART NO. LENGTH8979 36"8980 48"8690 60"Utility and Parts CartsSingle- or double-sidedmodular carts can be configuredwith any combination of shelves,parts bins, utility bins, etc. tomeet your exact needs. All areconstructed using Lista’s standardArlink 8000 column toallow complete interchangeabilityof components with work -stations.For accessories for utility andparts carts, see pages 22-28.Utility and Parts Carts54" high carts feature 2 wheel-lockingand 2 non-locking casters, 3 1 ⁄2" diameter.Wheels are rubber, non-marking.Accepts:• Shelves (page 22) – maximum shelfdepth for parts cart is 14"• Pegboard, louvered, reversible andmodesty panels (page 25)• Bin rails (page 26)• Power, air and data beams(page 24)• Pivoting accessories (page 28)PART NO. SECTION LENGTHSingle-sided8326SS 30"8915SS 36"8964SS 48"Double-sided8326DS 30"8915DS 36"8964DS 48"Progressive AssemblySystem AccessoriesFurther customize your system.Additional Side RailsPART NO. SECTION LENGTH8379 36"8380 48"8476 60"Parts Bin Rail Supports (pair)For bench top progressive assemblysystem.PART NO. SECTION LENGTH8505 24"30

VSI (Vertical Space Integrator) Accessory SystemSurface MountThe VSI (Vertical SpacePART NO.SECTION WIDTH*Starter assembly8352 30"8826 36"8855 48"8672 60"8793 72"Adder assembly8353 30"8828 36"8856 48"8673 60"Integrator) System is designedto expand the efficiency of:• Align ® adjustable heightworkstations• Lista technical electronicworkstations• Lista industrial workbenchesVSI uprights and accessoriesmount onto any workbenchworksurface to provide a completeaccessory system. VSIuprights’ double-sided columnsallow uprights and accessories tobe shared between two benches(see below).VSI (Vertical SpaceIntegrator) AccessorySystemFeatures sturdy 45" high, 1 1 ⁄4" wide,4" deep, roll-formed steel columns thatfasten to the bench top and are stabilizedby a modesty panel. Starterassembly includes 2 columns, 4 trimstrips, 1 modesty panel, and mountinghardware. Adder assembly includes1 mounting column, 2 trim strips,1 modesty panel and mounting hardware.Trim strip color can be chosen from thechart on page 16. Foot plate for surfacemount uprights is 5" x 3". Surfacemount VSI System width must be aminimum of 6" shorter than worksurfacewidth. Rear mount VSI System canbe full width of Align workstationworksurface.For VSI system accessories, see pages22-28.* must be a minimum of 6" shorter thanworksurface widthRear MountFor Align ® workstationsonly (seepages 35-36).PART NO.SECTION WIDTH*Starter assemblyADJ-VSI-830S 30"ADJ-VSI-836S 36"ADJ-VSI-848S 48"ADJ-VSI-860S 60"ADJ-VSI-872S 72"Adder assemblyADJ-VSI-830A 30"ADJ-VSI-836A 36"ADJ-VSI-848A 48"* section width must be equal to or less thanAlign worksurface widthColumn CapOptional gray plastic cap to finish offtop of column. Order 1 per column used.PART NO. W X D8004 1 1 ⁄2" x 4"• Retrofit to existing workbenchesYou can create highly productiveand efficient work centersby adding above-worksurfacework aids such as task lighting,storage shelves, power beams,parts bin rails, etc.With the VSI System, you’reable to utilize the Arlink 8000system’s wide range of shelvingand accessory options that easilyattach to the vertical columnwithout the need for tools, usingthe micro and macro slots onboth sides of the upright columns(see page 16 for detaileddescriptions).The VSI System is easilyinstalled by in-house personneland can be utilized as a singleunit on a stand-alone bench, orlinked together using ourstarter/adder system. VSIcolumns are double-sided, andone VSI may service twobenches when benches arepositioned back-to-back.31

Lista Align ® Adjustable Height WorkstationsCirtronics, a contract electronicmanufacturer, uses AlignAdjustable Height Workstationsthroughout its 80,000 sq. ft.facility. Align workstations areused for assembly, inspection,machining and a variety of otherfunctions. Their ergonomicadvantages have kept Cirtronicscoming back for more Alignwork stations over the years.

Lista’s Align ® AdjustableHeight Workstations bring theuser an unsurpassed level ofergonomic comfort, flexiblefunctionality and enhancedproductivity.With an adjustable heightranging from 27" to 42" (notincluding worksurface), thisworkspace solution is designedwith the operator in mind. Itreduces fatigue, stress andpotential injury. The work -station is ideally suited forrepairing, testing, and assemblingmechanical and electronicproducts and components.Innovative features include:• Proven, tested technologywith thousands of units inuse in the field• Universal platform, whichcan be adjusted via motor,hand crank or manuallyadjusted without a lift mechanism(slide leg base)• Center- and rear-justifiedoptions available• Precision drive system formain tenance-free reliability• Built-in cable/hose managementduct and modestypanel• Available for 30", 48", 60",72" and 90" length worksurfaces,and 24", 30", 36" and48" depth worksurfaces• Load capacity 1000 lbs.dynamic for motorized baseand 500 lbs. dynamic forhand crank baseAll uprights and componentsmove in relation toworksurface heightAvailable with the full range ofNexus System accessories(see pages 76-83)Wide choice ofworksurface materialsThree-position memory switch inmotorized base makes heightadjustment nearly automaticAvailable with eitherleveling glides or optional casters(see page 36)33

Easy-Order Align ® Adjustable Height WorkstationsModel ALE workstations include anAlign rear-justified motorized base.Model ALC workstations include anAlign rear-justified crank base.See page 36 for hanging cabinetdescriptions.How to order an Easy-OrderAlign Adjustable HeightWorkstationWorkstations withWorksurfaceTo add Easy-Order Nexus System configurationto workstations with worksurfaceshown below, see pages 84-85.Workstations withAdjustable Riser ShelfIncludes:• worksurface back stop• adjustable riser shelf with back stopWorkstations withInstrument Riser ShelfIncludes:• (2) 16" instrument riser supports(1 with power)• 12" deep instrument riser shelf• worksurface and shelf back stops1. Select Easy-Order workstationconfiguration.■■■■■■2. ■ Select worksurface style.See page 42 for work surfacedescriptions.PLB = Plastic laminateBTB = Butcher blockSDB = Static dissipative (includesground cord and hardware)All worksurfaces have a bullnosefront edge and are 30" deep.PART NO.ALE/R5000-■■■ALC/R5000-■■■DESCRIPTIONmotorizedhand crankPART NO.ALE/R5001-■■■ALC/R5001-■■■DESCRIPTIONmotorizedhand crankPART NO.ALE/R5002-■■■ALC/R5002-■■■DESCRIPTIONmotorizedhand crank3. ■ Select worksurface size.6030 = 60" long x 30" deep7230 = 72" long x 30" deep4. ■ Select paint color. Add 2-letterpaint code shown in color chart onback cover.■■■■■■5. ■ Select lock type for modelswith hanging cabinet.RG = individualKA = keyed-alikeMA = masterEXAMPLE: to order an ALE/R5201work station with a 72" long plasticlaminate worksurface and shelf andClassic Blue paint, with an individuallock for the hanging cabinet, the partnumber would be ALE/R5201-PLB7230CB, with a WBHC450-2-RGhanging cabinet.PART NO.ALE/R5100-■■■ALC/R5100-■■■INCLUDESWBHC150-1-■hanging cabinetWBHC150-1-■hanging cabinetPART NO.ALE/R5101-■■■ALC/R5101-■■■INCLUDESWBHC150-1-■hanging cabinetWBHC150-1-■hanging cabinetPART NO.ALE/R5102-■■■ALC/R5102-■■■INCLUDESWBHC150-1-■hanging cabinetWBHC150-1-■hanging cabinet■■■■■■PART NO.ALE/R5200-■■■ALC/R5200-■■■INCLUDESWBHC450-2-■hanging cabinetWBHC450-2-■hanging cabinetPART NO.ALE/R5201-■■■ALC/R5201-■■■INCLUDESWBHC450-2-■hanging cabinetWBHC450-2-■hanging cabinetPART NO.ALE/R5202-■■■ALC/R5202-■■■INCLUDESWBHC450-2-■hanging cabinetWBHC450-2-■hanging cabinet34

Align ® Adjustable Height Workstation Operator-Adjustable BasesMOTORIZED BASE REAR-JUSTIFIEDWITH OPTIONAL CASTERSHAND CRANK BASE CENTER-JUSTIFIEDMotorized BasesFeatures a low-EMS, low-voltage dualactuator controller for synchronized legmovement and stressless operation.Three height positions can be presetwith the programmable switch. Staticand dynamic load capacity is 1,000 lbs.Height range (floor to top of base, notincluding worksurface) is 27"- 42".Worksurface not included – seepage 42 for worksurface choices.Some assembly required.Motorized Bases, Rear-JustifiedPART NO. BASE WORKSURFACEWIDTH LENGTH (MIN.)24" deepALE/R3024 29" 30"ALE/R4824 47" 48"ALE/R6024 59" 60"ALE/R7224 71" 72"ALE/R9024 89" 90"30" deepALE/R3030 29" 30"ALE/R4830 47" 48"ALE/R6030 59" 60"ALE/R7230 71" 72"ALE/R9030 89" 90"36" deepALE/R3036 29" 30"ALE/R4836 47" 48"ALE/R6036 59" 60"ALE/R7236 71" 72"ALE/R9036 89" 90"Motorized Bases,Center-JustifiedPART NO. BASE WORKSURFACEWIDTH LENGTH (MIN.)30" deepALE/C3030 29" 30"ALE/C4830 47" 48"ALE/C6030 59" 60"ALE/C7230 71" 72"ALE/C9030 89" 90"36" deepALE/C3036 29" 30"ALE/C4836 47" 48"ALE/C6036 59" 60"ALE/C7236 71" 72"ALE/C9036 89" 90"48" deepALE/C6048 59" 60"ALE/C7248 71" 72"ALE/C9048 89" 90"Hand Crank BasesHand crank static load capacity is 1,000lbs., dynamic load capacity is 500 lbs.Height range (floor to top of base, notincluding worksurface) is 27"- 42".Worksurface not included – seepage 42 for worksurface choices.Some assembly required.Hand Crank Bases,Rear-JustifiedPART NO. BASE WORKSURFACEWIDTH LENGTH (MIN.)24" deepALC/R3024 29" 30"ALC/R4824 47" 48"ALC/R6024 59" 60"ALC/R7224 71" 72"ALC/R9024 89" 90"30" deepALC/R3030 29" 30"ALC/R4830 47" 48"ALC/R6030 59" 60"ALC/R7230 71" 72"ALC/R9030 89" 90"36" deepALC/R3036 29" 30"ALC/R4836 47" 48"ALC/R6036 59" 60"ALC/R7236 71" 72"ALC/R9036 89" 90"Hand Crank Bases,Center-JustifiedPART NO. BASE WORKSURFACEWIDTH LENGTH (MIN.)30" deepALC/C3030 29" 30"ALC/C4830 47" 48"ALC/C6030 59" 60"ALC/C7230 71" 72"ALC/C9030 89" 90"36" deepALC/C3036 29" 30"ALC/C4836 47" 48"ALC/C6036 59" 60"ALC/C7236 71" 72"ALC/C9036 89" 90"48" deepALC/C6048 59" 60"ALC/C7248 71" 72"ALC/C9048 89" 90"35

Align ® Adjustable Height Workstation Slide Leg Bases, AccessoriesSLIDE LEG BASE CENTER-JUSTIFIEDSlide Leg BasesWorksurface height is repositioned bysliding leg up or down to desired heightand setting a pin. Static load capacity is1,000 lbs. Height range (floor to top ofbase, not including worksurface) is27"- 42". Work surface not included– see page 42 for worksurfacechoices. Assembly required.Slide Leg Bases, Rear-JustifiedPART NO. BASE WORKSURFACEWIDTH LENGTH (MIN.)24" deepALS/R3024 28" 30"ALS/R4824 46" 48"ALS/R6024 58" 60"ALS/R7224 70" 72"ALS/R9024 87 1 ⁄ 2" 90"30" deepALS/R3030 28" 30"ALS/R4830 46" 48"ALS/R6030 58" 60"ALS/R7230 70" 72"ALS/R9030 87 1 ⁄ 2" 90"36" deepALS/R3036 28" 30"ALS/R4836 46" 48"ALS/R6036 58" 60"ALS/R7236 70" 72"ALS/R9036 87 1 ⁄ 2" 90"Slide Leg Bases,Center-JustifiedPART NO. BASE WORKSURFACEWIDTH LENGTH (MIN.)30" deepALS/C3030 28" 30"ALS/C4830 46" 48"ALS/C6030 58" 60"ALS/C7230 70" 72"ALS/C9030 87 1 ⁄ 2" 90"36" deepALS/C3036 28" 30"ALS/C4836 46" 48"ALS/C6036 58" 60"ALS/C7236 70" 72"ALS/C9036 87 1 ⁄ 2" 90"48" deepALS/C6048 58" 60"ALS/C7248 70" 72"ALS/C9048 87 1 ⁄ 2" 90"CastersCasters can be added to any adjustableheight base to allow mobility. Caster is5" diameter, increases overall height 6".325 lb. capacity per caster.PART NO. DESCRIPTIONAL/CAST5X1 5" caster set, (2) swivel,(2) swivel-with-wheel-lockCAST5X1S-NB (1) swivel 5" casterCAST5X1S-WB (1) swivel-with-wheel-lock5" casterOffset Caster AssemblyOffset caster assemblies do not increasethe overall height range of the base.Welded frame replaces standard feet.Includes pair of offset frames with(2) 5" swivel casters and (2) 5" swivelwith-wheel-lockcasters. Rear castersextend 4" beyond back of worksurface.Painted to match base. For motorizedand hand crank bases only.PART NO.AL/CAST5X1-OFDESCRIPTIONpair of framesWorkstation HangingCabinets16 3 ⁄4" (426mm) wide x 19 1 ⁄4"(491mm) deepCabinet is suspended from the work -surface. 50 lb. (22.5kg) weight capacityper drawer. Usable inside dimensions:13 1 ⁄4" (338.5mm) wide x 16 15 ⁄16"(430mm) deep. Drawers do not acceptLista partitions and dividers.For Align workstations only: Notavailable for center-justified or 24"deep rear-justified Align workstations.Cabinet can not be positioned at sameend of bench as keypad or hand crank.PART NO. HEIGHT DRAWERSWBHC075-1-■■ 5" (1) 2 3 ⁄4"WBHC150-1-■■ 8" (1) 5 3 ⁄4"WBHC150-2-■■ 8" (2) 2 3 ⁄4"WBHC300-1-■■ 13 15 ⁄16" (1) file*WBHC300-2-■■ 13 15 ⁄16" (2) 5 3 ⁄4"WBHC450-2-■■ 19 7 ⁄8" (1) 5 3 ⁄4"+(1) file*WBHC450-3-■■ 19 7 ⁄8" (3) 5 3 ⁄4"*file drawer includes file hangersHow to order a hangingcabinet1. Select cabinet.2. ■ Select lock type.*NL = noneKA = keyed-alikeRG = individualMA = master3. ■ Select paint color. For colorchart, see back cover.*units ordered without lock can not havelock installed at a later date36

Align ® Adjustable Height Workstation AccessoriesAlign Bottom ShelvesProvides open storage beneath worksurface.16" deep. Accepts verticalwire dividers (see below). 150 lb.(68kg) capacity. For motorized andhand crank bases only.PART NO.LENGTHALBS/F-4816 48"ALBS/F-6016 60"ALBS/F-7216 72"ALBS/F-9016 90"Vertical Wire Dividers forBottom Shelves15" deep dividers are 1 ⁄4" diametergalvanized wire that fit into prepunchedholes in the 16" deep shelf.No hardware required.PART NO.HEIGHTNXS/WD150-15 6"NXS/WD250-15 10"NXS/WD450-15 18"CPU HolderMounts to undersideof worksurface.9 1 ⁄2" widex 18" deep x 20"high. Painted tomatch workstation.PART NO.CPU/HKeyboard HolderTiltable keyboard holder allows computerkeyboard to be stored underworksurface when not in use. Includesswivel pull-out mouse pad which canbe attached to either right or left side.Align Attached FootrestErgonomic footrest attaches over Alignbase stringer. Height adjustable from3"-12 1 ⁄4" (plus height of stringer).Footrest platform is 15" deep x 21 3 ⁄4"wide, and adjusts from totally flat to a25° angle. Ribbed mat included. Notusable for 30" wide Align workstations.PART NO.AL/AFRFreestanding FootrestErgonomic footrest provides support foruser’s feet. Height adjustable from3"-12 1 ⁄4". Footrest platform is 15"deep x 21 3 ⁄4" wide, and adjusts fromtotally flat to a 25° angle. Ribbed matincluded.PART NO.WB/FFRFor companion stationary andmobile drawer storage cabinets,see pages 62-64 and 68-70, orLista’s General Storage Catalog.Nexus Rear-Mount FramesFor use with Align ® rear-justifiedadjustable height bases only.Starter frames consist of 2 uprightposts, a horizontal rail, brackets andhardware. Adder sets consist of anadditional upright, a horizontal rail anda bracket. Frames are sturdy, heavygauge steel, and are notched front andback at 1" increments for mountingaccessories. Uprights are available inheights of 30" and 48" (height =height above top of base), and widthsof 24", 30", 36", 42", 48" and 60".Specify color from chart on back cover.30" High* Rear-Mount FramesPART NO. SEC. WIDTH CENT.-TO-CENT.Starter setNXF/RM2430 24"NXF/RM3030 30"NXF/RM3630 36"NXF/RM4230 42"NXF/RM4830 48"NXF/RM6030 60"Adder setNXF/RM2430A 24"NXF/RM3030A 30"NXF/RM3630A 36"NXF/RM4230A 42"NXF/RM4830A 48"NXF/RM6030A 60"* upright overall height is 48"48" High* Rear-Mount FramesPART NO. SEC. WIDTH CENT.-TO-CENT.Starter setNXF/RM2448 24"NXF/RM3048 30"NXF/RM3648 36"NXF/RM4248 42"NXF/RM4848 48"NXF/RM6048 60"Adder setNXF/RM2448A 24"NXF/RM3048A 30"NXF/RM3648A 36"NXF/RM4248A 42"NXF/RM4848A 48"NXF/RM6048A 60"* upright overall height is 60"Nexus Extended Rear-Mount FramesFor use with Align ® rear-justifiedadjustable height bases only.Allows use of the full width of an Alignrear-justified adjustable height workstationfor support of a Nexus system.The total width of the extendedrear-mount frame must equal thewidth of the Align workstation.Extended rear-mount frame is thestarter set; use the standard rearmountadder (on facing page) foradder unit. Not for use with Alignworkstations that are placed flushside-to-side. Specify color from charton back cover.30" High* Extended Rear-Mount FramesPART NO.WIDTHNXF/RM2430-EXT 24"NXF/RM3030-EXT 30"NXF/RM3630-EXT 36"NXF/RM4230-EXT 42"NXF/RM4830-EXT 48"NXF/RM6030-EXT 60"* upright overall height is 48"48" High* Extended Rear-Mount FramesPART NO.WIDTHNXF/RM2448-EXT 24"NXF/RM3048-EXT 30"NXF/RM3648-EXT 36"NXF/RM4248-EXT 42"NXF/RM4848-EXT 48"NXF/RM6048-EXT 60"* upright overall height is 60"Nexus System AccessoriesFor the full range of Nexus systemaccessories, see pages 77-83. ForEasy-Order Nexus combinations, seepage 85.PART NO. L X WWB/KBH 21" x 10"37

Lista Technical Electronic WorkstationsArizona State University’sArchitecture Department hasequipped a number of its studentwork areas with versatile Listatech nical electronic workstations.The workstations’ attractivedesign, wealth of availableaccessories and configurabilityhave made them a popular solutionwith both students and staff.

Featuring a sleek, aestheticallypleasing design, the realbeauty of Lista’s technical electronicworkstations is their abilityto perfectly suit the widestvariety of applications.Our modular approach is thekey to our technical electronicworkstation’s versatility, withflexible standard componentsand accessory options bothabove and below the worksurface,leading to greater productivityand efficiency.Many configurations featurea built-in electrical power supply,conveniently located oneither an instrument riser or asa part of the Nexus accessorysystem (for more on the Nexussystem, see pages 76-85).Choose from a wide array ofstatic-safe components, includingESD paint, worksurfacesand shelves, conductive plasticboxes and grounding accessories.Technical electronic workstationshave a 1,000 lb.(454kg) weight capacity, andcan be configured with a varietyof leg and cabinet pedestalchoices, including mobile basesfor increased flexibility andease of reconfiguration. Mobileworkstations can be quicklymoved to and from a work site.Wide choice of above-work -surface accessoriesAccess to electrical power availableon instrument risers andNexus Accessory SystemDurable worksurfaces come inmultiple lengths and depths, in achoice of materials, including ESDFront and rear top support railsprotect integrity of worksurfaceChoice of pedestal and leg supports,including Tech Leg, TechPanel Leg and a large selection ofcabinet pedestalsChoice of leveling glides ormobile casters (for 4-legconfigurations)39

Easy-Order Technical Electronic WorkstationsEasy-Order technical electronic workstationsinclude Narrow Width (16 7 ⁄8"wide) cabinet pedestals (see page 61for descriptions). Customer-specifiedcabinet pedestals (shown in gray) mustbe ordered separately – for Easy-Ordercabinet pedestals, see pages 62-63 forNarrow Width cabinets and pages 68-69 for MP Width cabinets. For moreinformation on overhead cabinets, seeLista’s General Storage Catalog.Workstations with 2 TechLegsOverall bench height including worksurface is 35 1 ⁄4". Includes:• 2 tech panel legs (legs 33 1 ⁄2" high)• 1 pair of top support rails• 1 stringerWorkstations with 2 TechLegs and 1 DrawerOverall bench height including worksurface is 35 1 ⁄4". Includes:• 2 tech panel legs (legs 33 1 ⁄2" high)• 1 pair of top support rails• 1 stringer• 1 WBHC150-1 hanging cabinetWorkstations with 1 TechLeg and 1 CabinetOverall bench height including worksurface is 35 1 ⁄4". Includes:• 1 tech panel leg (leg 33 1 ⁄2" high)• 1 pair of top support rails• 1 stringer• 1 NW0600-0402NA-F6RG cabinetHow to order an Easy-OrderTechnical ElectronicWorkstation1. Select Easy-Order workstationconfiguration.PART NO.TB3000-■■■PART NO.TB3100-■■■PART NO.TB3200-■■■402. ■ Select worksurface style. Seepage 42 for descriptions.PLB = Plastic laminateBTB = Butcher blockSDB = Static dissipative (includesground cord and hardware)All worksurfaces have a bullnosefront edge and are 30"deep.3. ■ Select worksurface size.4830 = 48" long x 30" deep6030 = 60" long x 30" deep7230 = 72" long x 30" deep4. ■ Select paint color. For colorchart, see back cover or below.EXAMPLE: to order a TB3201 workstationwith a 72" long plastic laminateworksurface and shelf and BrightBlue paint, the part number would beTB3201-PLB7230BB.5. Select cabinet pedestals (forTB03xx and TB06xx configurations).For Easy-Order cabinet pedestals,see pages 62-63 for Narrow Widthcabinets and pages 68-69 for MPWidth cabinets.EXAMPLE (CUSTOMER-SPECIFIEDCABINETS): to order a TB0300 workstationwith a 72" long plastic laminateworksurface, and anNW0750-0601NA cabinet pedestalwith Bright Blue paint, theworkstation part number would beTB0300-PLB7230BB, and thecabinet part number would beNW0750-0601NA-NBRGBB.PART NO. INCLUDESTB3001■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3002-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stops---------------------------PART NO. INCLUDESTB3003-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet■■■■■■PART NO. INCLUDESTB3101-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3102-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stops---------------------------PART NO. INCLUDESTB3103-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet■■■■■■PART NO. INCLUDESTB3201-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3202-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stops---------------------------PART NO. INCLUDESTB3203-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■■■■■■■GR (Dark Gray paint)

Workstations with 1 Leg,1 Customer-Specified Cab.Overall bench height including worksurface is 35 1 ⁄4". Includes:• 1 tech panel leg (leg 33 1 ⁄2" high)• 1 pair of top support rails• 1 stringer• cabinet pedestal chosen by customerWorkstations with 2 CabinetsOverall bench height including worksurface is 35 1 ⁄4". Includes:• 1 NW0600-0402NA-F6KA cabinet*• 1 NW0600-0202NA-F6KA cabinet**includes keyed-alike locksOverall bench height including worksurface is 35 1 ⁄4". Includes:• 1 NW0600-0501NA-F6KA cabinet*• 1 NW0600-0201N-F6KA cabinet**includes keyed-alike locksWorkstations with2 Customer-SpecifiedCabinetsOverall bench height including worksurface is 35 1 ⁄4". Includes:• 2 cabinet pedestals chosen bycustomerPART NO.TB0300-■■■PART NO.TB3400-■■■PART NO.TB3500-■■■PART NO.TB0600■■■PART NO. INCLUDESTB0301-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3401-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB3501-■■■ 12" adj. riser shelf w/back stopworkstation back stopPART NO. INCLUDESTB0601-■■■ 12" adj. riser shelf w/back stopworkstation back stop■■■■■■■■■■■■■■■■■■■■■■■■PART NO. INCLUDESTB0302-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stopsPART NO. INCLUDESTB3402-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stopsPART NO. INCLUDESTB3502-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stopsPART NO. INCLUDESTB0602-■■■ (2) 16" instrument risersupports (1 with power)12" deep instru. riser shelfworksta. + shelf back stops------------------------------------------------------------------------------------------------------------PART NO. INCLUDESTB0303-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinetPART NO. INCLUDESTB3403-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■PART NO. INCLUDESTB3503-■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinetFW (White paint)PART NO. INCLUDESTB0603■■■ 15" deep station. riser shelfwith louvered back panel(2) 16" high overhead cabswith retractable doors**48" long benches include (1) overhead cabinet41

Technical Electronic and Align ® Workstation WorksurfacesLista worksurfaces are alleasy to maintain, rugged, anddurable.Worksurfaces come in 48",60", 72", 84", 90" and 96"lengths, and are 24", 30" or 36"deep, depending on worksurface.Other sizes are available,and certain worksurfaces areavailable with a bullnose frontedge.Ball Transfer WorksurfacesBall transfer worksurfaces offer a costeffective, efficient means of workflowmanagement for products or pallets inan assembly, repair or rework environment.Please contact your Lista representativefor help in configuring asystem and providing the solution bestsuited to your requirements.Plastic LaminateParticle board core with plastic laminatedtop and sides. 1 9 ⁄16" thick. Dovegray is standard but other colors areavailable on request. Avail able instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to the end of thepart number.PART NO. LENGTH24" deepPTOP-4824 48"PTOP-6024 60"PTOP-7224 72"PTOP-8424* 84"PTOP-9024* 90"PTOP-9624* 96"30" deepPTOP-48 48"PTOP-60 60"PTOP-72 72"PTOP-84* 84"PTOP-90* 90"PTOP-96* 96"36" deepPTOP-4836 48"PTOP-6036 60"PTOP-7236 72"PTOP-8436* 84"PTOP-9036* 90"PTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Phenolic ResinA high-pressure laminate designed forlab oratory worksurfaces. Resistant tochemicals, stains or discoloration.Worksurface is 1" thick phenolic resin,available in black.PART NO. SIZERTOP-48 48" long x 30" deepRTOP-60 60" long x 30" deepRTOP-72* 72" long x 30" deepRTOP-84* 84" long x 30" deepRTOP-90* 90" long x 30" deepRTOP-96* 96" long x 30" deep*requires additional support (third leg or hatsection stiffener)Static Dissipative PlasticLaminateParticle board core with plastic laminatedtop and sides, 1 9 ⁄16" thick.Grounding bolt and 10' grounding cordwith a 1 megohm resistor included.Standard color is dove gray but othercolors available on request. Available instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to end of partnumber.Worksurfaces display electrical propertieswithin static dissipative boundariesof 10 6 -10 9 ohms over a wide range ofrelative humidities (ranging from 60%RH to as low as 10% RH) to meet ESDspecifications. Meets EOS/ESD S4.1specifications. For detailed specifications,please contact Lista.PART NO. LENGTH24" deepSDTOP-4824 48"SDTOP-6024 60"SDTOP-7224 72"SDTOP-8424* 84"SDTOP-9024* 90"SDTOP-9624* 96"30" deepSDTOP-48 48"SDTOP-60 60"SDTOP-72 72"SDTOP-84* 84"SDTOP-90* 90"SDTOP-96* 96"36" deepSDTOP-4836 48"SDTOP-6036 60"SDTOP-7236 72"SDTOP-8436* 84"SDTOP-9036* 90"SDTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Butcher BlockSatin finish 1 3 ⁄4" thick hardwood.Available in standard square edge orbullnose front edge (shown above). Toorder a bullnose edge, add “BN” to theend of the part number.PART NO. LENGTH24" deepBTOP-4824 48"BTOP-6024 60"BTOP-7224 72"BTOP-8424 84"BTOP-9024 90"BTOP-9624 96"30" deepBTOP-48 48"BTOP-60 60"BTOP-72 72"BTOP-84 84"BTOP-90 90"BTOP-96 96"36" deepBTOP-4836 48"BTOP-6036 60"BTOP-7236 72"BTOP-8436 84"BTOP-9036 90"BTOP-9636 96"Static DissipativeWorksurface AccessoriesESD Isolation KitsRequired to prevent a redundantground (ground loop) with cabinet/worksurface grounding system.Necessary when powered items areused with either non-ESD paintedNexus accessories, ESD paintedNexus accessories with static dissipativeworksurfaces, or powered instrumentriser shelves on staticdissipative worksurfaces.PART NO.ESDISO-KIT/IRSSDESCRIPTIONinstrument risershelf isolation kitWorksurface Grounding KitKit is supplied with all static dissipativeworksurfaces.PART NO.DESCRIPTIONGCT8' cord w/1 megohm resistor42

Technical Electronic Workstation Below-Worksurface ComponentsTech Legs2" x 2" tube leg pairwith cross piece. Legsinclude glides for levelingon uneven surfaces.Top supportrails are requiredfor all workstationconfigurationswhich include TechLeg(s) (not included).PART NO. WORKSURFACE DEPTH27 1 ⁄2" (700mm) highWBTL27.5X22.5 24" (610mm)WBTL27.5X28.5 30" (762mm)WBTL27.5X34.5 36" (915mm)33 1 ⁄2" (850mm) highWBTL33.5X22.5 24" (610mm)WBTL33.5X28.5 30" (762mm)WBTL33.5X34.5 36" (915mm)Tech Panel LegsSame basic constructionas the Tech Legwith a formed panelwelded in place.Includes levelingglides. Top supportrails are required forall workstation configurationswhichinclude Tech Panel Leg(s) (notincluded).PART NO. WORKSURFACE DEPTH27 1 ⁄2" (700mm) highWBTL /P27.5X22.5 24" (610mm)WBTL /P27.5X28.5 30" (762mm)WBTL /P27.5X34.5 36" (915mm)33 1 ⁄2" (850mm) highWBTL /P33.5X22.5 24" (610mm)WBTL /P33.5X28.5 30" (762mm)WBTL /P33.5X34.5 36" (915mm)Tech LegMobileCastersPair of casters usedto add mobility toTech Legs and Tech Panel Legs. Swivelstem casters are 5" x 1 1 ⁄4" and replaceglides which come with stationary legs.Tech Legs with mobile casters can notbe paired with a cabinet pedestal.PART NO.WBTL/CAST5WBWBTL/CAST5NBDESCRIPTIONpair, with wheel brakepair, w/o wheel brakeTech LegExtendersPair of extenders isused to add additionalheight adjustmentfor stationaryTech Legs and TechPanel Legs. Adds upto 6" in height in 1" increments.Extender accepts glides for levelingand/or additional height adjustment.PART NO.WBTL / EXT6DESCRIPTIONpairTop Support RailsPair of rails support front and back ofwork surface to protect integrity of top.Required for all technical electronicworkstations with at least one leg.Not for use with workstations with2 cabinet pedestals. Comes as pair.PART NO.WORKSURF. LENGTHWBTSC48/■■ 48"WBTSC60/■■ 60"WBTSC72/■■ 72"WBTSC84/■■ 84"How to order top supportrails1. Select part number based onworksurface length.2. ■ Specify left-hand (facing theworkstation) bench support.TL = Tech Leg or Panel LegNW* = NW cabinetMP* = MP cabinet3. ■ Specify right-hand (facingthe workstation) bench support.TL = Tech Leg or Panel LegNW* = NW cabinetMP* = MP cabinetEXAMPLE: to order a pair of topsupport rails for a workstation witha 72" worksurface, an MP Widthcabinet as the left-hand pedestaland a Tech Leg as the right-handsupport, the part number would beWBTSC72/MPTL.*top support rail not used to supportworksurface of workstations with2 cabinet pedestalsStringers/Foot RestsTelescoping heavy gauge U channel with2 mounting holes on each end plate.PART NO.WORKSURF. LENGTHWBLST48/■■ 48"WBLST60/■■ 60"WBLST72/■■ 72"WBLST84/■■ 84"WBLST90/■■ 90"WBLST96/■■ 96"Bottom ShelvesTelescoping heavy gauge steel shelf,12" deep, for use as storage or foot rest.150 lb. weight capacity for evenly distributedloads, except as noted.PART NO.WORKSURF. LENGTHWBLBS48/■■ 48"WBLBS60/■■ 60"WBLBS72/■■ 72"WBLBS84/■■ 84"WBLBS90/■■* 90"WBLBS96/■■* 96"*100 lb. weight capacityHow to order stringers andbottom shelves1. Select part number based onworksurface length.2. ■ Specify left-hand (facing theworkstation) bench support.TLNWMP= Tech Leg or Panel Leg= NW cabinet= MP cabinet3. ■ Specify right-hand (facingthe workstation) bench support.TLNWMP= Tech Leg or Panel Leg= NW cabinet= MP cabinetEXAMPLE: to order a bottom shelffor a workstation with a 72" worksurface,an MP Width cabinet as theleft-hand pedestal and a Tech Leg asthe right-hand support, the partnumber would be WBLBS72/MPTL.Privacy PanelsSteel panel attaches to leg or cabinetand runs full length of worksurface.22 3 ⁄4" high.PART NO.WORKSURF. LENGTHWBLPP22.8X48 48"WBLPP22.8X60 60"WBLPP22.8X72 72"WBLPP22.8X84 84"WBLPP22.8X90 90"WBLPP22.8X96 96"Wrist Strapand GroundBlockMounts to under -side of work surface.Dual receptacles for2 wrist straps.PART NO. DESCRIPTIONGB ground blockWS wrist strap with 6' coil cord** with 1 megohm resistorGround KitsKit is supplied with all static dissipativeworksurfaces or shelves. Includes attachinghardware.PART NO. DESCRIPTIONGCT worksurface kit with 8' cord*GCS shelf kit with 6' cord*** with 1 megohm resistor** without 1 megohm resistorCabinet PedestalsFor a selection of drawer cabinetsto serve as pedestals for technicalelectronic workstations, see pages60-69.43

Technical Electronic Workstation Above-Worksurface AccessoriesBack Stops and End StopsSteel back stops and end stops haverounded corners. Stops extend approximately3" above the worksurface. Foruse with worksurfaces or shelves.Back StopsPART NO. WORKSURFACE LENGTHWBTBS-48 48"WBTBS-60 60"WBTBS-72 72"WBTBS-84 84"WBTBS-90 90"WBTBS-96 96"End Stops (pair)PART NO. WORKSURFACE DEPTHWBTES-22 24"WBTES-28 30"WBTES-34 36"Adjustable Riser ShelfAssembliesShelves measure 1 1 ⁄4" thick x 12" deep.Shelf height can be adjusted in 1 1 ⁄2"increments from 12"-18". A steel backstop is available for the shelf assembly(ordered separately – see above).Includes the number of adjust able supportbrackets shown in the charts.Assemblies with PlasticLaminate ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS90P 90" 3ARS96P 96" 3Assemblies w/Butcher Block ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48B 48" 2ARS60B 60" 2ARS72B 72" 2ARS84B 84" 2ARS90B 90" 3ARS96B 96" 3Adjustable Support BracketBracket supports riser shelf. May berequired to supplement the supportsincluded with shelf assemblies (seecharts above) for support of longshelves or shelves carrying heavy loads.Instrument Riser ShelfSupportsEither 16", 20" or 24" high, withremovable side panels. 20" and 24"models provide extra space to run airlines or meet additional power requirements.Ordered individually. Shelvesordered separately (see right). Seepage 42 for isolation kits when usedwith static dissipative worksurfaces.16" High SupportsPART NO. DESCRIPTIONIRSS16 no powerIRSS16/15 with 15 ampIRSS16/20 with 20 ampIRSS16/GF-15 with 15 amp GFCIIRSS16/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelves20" High SupportsPART NO. DESCRIPTIONIRSS20 no powerIRSS20/15 with 15 ampIRSS20/20 with 20 ampIRSS20/GF-15 with 15 amp GFCIIRSS20/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelves24" High SupportsPART NO. DESCRIPTIONIRSS24 no powerIRSS24/15 with 15 ampIRSS24/20 with 20 ampIRSS24/GF-15 with 15 amp GFCIIRSS24/GF-20 with 20 amp GFCILista recommends using a third centersupport with 84", 90" and 96" shelvesOverhead CabinetsFor a selection of overhead cabinetsfor additional storage above instrumentriser shelves, see our GeneralStorage Catalog.Riser ShelvesAll shelves measure 1 1 ⁄4" thick x 12"or 15" deep and mount to shelf supports.Add “12” or “15” in place of thegreen box (■) in the part number tospecify a shelf depth of 12" or 15".Back stops for shelves can be orderedfrom the chart to left.Plastic Laminate ShelvesPART NO. LENGTHPS48 ■ 48"PS60 ■ 60"PS72 ■* 72"PS84 ■** 84"PS90 ■** 90"PS96 ■** 96"*Lista recommends using a back stop orthird center support with 72" shelves**Lista recommends using a third centersupport with 84", 90" and 96" shelvesStatic Dissipative PlasticLaminate ShelvesComes with grounding bolt andgrounding cord. See page 42 for staticdissipative specifications.PART NO. LENGTHSD48 ■ 48"SD60 ■ 60"SD72 ■* 72"SD84 ■** 84"SD90 ■** 90"SD96 ■** 96"*Lista recommends using a back stop orthird center support with 72" shelves**Lista recommends using a third centersupport with 84", 90" and 96" shelvesButcher Block ShelvesPART NO. LENGTHBS48 ■ 48"BS60 ■ 60"BS72 ■ 72"BS84 ■* 84"BS90 ■* 90"BS96 ■* 96"*Lista recommends using a third centersupport with 84", 90" and 96" shelvesAbove-worksurface accessoriesusing the Nexus System areshown on pages 76-85.Instrument Riser ShelfRear PanelsFull rear panel extends from worksurfaceto form back panel between theworksurface and riser shelf. Availableflush with the shelf or with a 2" backstop for the riser shelf.PART NO.Flush with shelfIRS-FRP■■IRS-FRP■■-PIRS-FRP■■-LWith 2" back stopIRS-FRP■■-2IRS-FRP■■-2PIRS-FRP■■-2LDESCRIPTIONsolid rear panelpegboard rear panellouvered rear panelsolid rear panelpegboard rear panellouvered rear panelHow to order a rear panel1. Select part number.2. ■ Specify shelf length.48 = 48" long60 = 60" long72 = 72" long84 = 84" long90 = 90" long96 = 96" long3. ■ Specify shelf supportheight.16 = 16" high20 = 20" high24 = 24" highEXAMPLE: to order a pegboardrear panel for a 60" long shelf with16" shelf supports, the part numberis IRS-FRP6016-P.44PART NO.ARS-BR

How to Order Technical Electronic Workstation Custom Configurations3These are the basic stepsrequired for ordering custom31233■■■■■technical electronic work -stations.TO ORDER AN EASY-ORDERCOMBINATION (WORKSTA-TION WITH PRECONFIG-URED ACCESSORIES), SEEPAGES 40-41.2221 Select worksurfaceSelect the worksurface that best suitsyour needs from the choices on page42. Choose the worksurface length,depth and style that you prefer.2 Select below-worksurfaceaccessories or basesSelect either 2-leg,1-leg-with-cabinet or2-cabinet configuration. Legs, stringers,bottom shelves and privacy panels areshown on page 43. Hanging cabinetsare shown on page 36. To select a cabinetpedestal(s), please see pages 60-69.3 Select aboveworksurfaceaccessoriesSelect the back stop and endstops (page 44), shelves (instrumentriser or adjustable – seepage 44) and/or Nexus Systemcomponents (pages 76-85) thatsuit your needs.4 Select colorsSelect a color from the chart on theback cover. Cabinet housing anddrawer fronts can be different colors,but drawer interiors are always gray.Sample Workstation OrderQTY. PART NO. DESCRIPTION1 PTOP-60BN plastic laminate worksurfacewith bullnose edge 60" x 30"1 WBTL33.5X28.5 Tech Leg1 WBLST60TLNW stringer1 WBTSC60TLNW top support rails (pair)1 NW0600-0402N-F6RGBB Easy-Order cabinet pedestal1 WBTBS-60 workstation back stop1 IRSS20 instrument riser support1 IRSS20/15 instrument riser support1 PS6012 plastic laminate riser shelf1 WBTBS-60 shelf back stopBB bright blue paint1222233333445

Lista Industrial WorkbenchesRugged Lista industrial workbenchesstand up to the demandsof the harshest environments. AtGeneral Hydrogen, a Lista benchwith galvanized steel worksurfaceis used as a welding station. Thedouble width cabinet pedestalallows the storage of weldingrods in adjacent drawers.

RUGGED, DURABLE WORKSPACE SOLUTIONSTO SUIT ANY ENVIRONMENTLista Industrial WorkbenchesIndustrial Workbench Features 48Industrial Workbench Examples 50Industrial Workbench Easy-Order Combinations 52Industrial Workbench Easy-Order Mobile Combinations 54Industrial Workbench Worksurfaces 56Industrial Workbench Under-Worksurface Legs and Accessories 57Industrial Workbench Above-Worksurface Accessories 58How to Order Industrial Workbench Custom Configurations 5947

Lista Industrial Workbench FeaturesRugged. Durable. Built to handlethe harshest work environments.Lista’s industrialworkbenches feature flexiblestandard components andcan be cost-effectively customconfigured to meet the specificneeds of your application.Feature: Wide choice of above-worksurface accessoriesCreate task-specific configurationsBenefit: Greater productivity and efficiencyFeature: Variety of worksurfacesDurable tops come in a variety of sizesBenefit: Worksurface always appropriate to applicationFeature: Removable lock coreLocks can be replaced in the fieldBenefit: Greater security, easy replacementFeature: Ergonomic handlesWhen drawers are closed, handles are flush with housing so nothingprotrudes. Drawer handles are located at top of drawer.Benefit: Improves safety, appearance and ergonomicsFeature: Customizable drawer compartmentsA wide variety of drawer accessories for maximumpartitioning flexibilityBenefit: Better organization, faster retrievalFeature: Choice of pedestal sizes and stylesWide variety of workbench support optionsBenefit: Customized to your needsFeature: Heavy-duty welded legOne-piece leg with bottom hole for leveling glidesBenefit: Provides support for heavy-duty applicationsFeature: MobilityCabinets and legs are availablewith castersBenefit: Work areas caneasily be reconfigured,components can be moved toand from the work site48

Lista Industrial Workbenches Make Any Workspace WorkLista’s rugged industrial workbenchsystems and their largevariety of accessories can beconfigured to suit almost anyapplication or working environment.Sets of workbenches make maximumuse of the available space inthis machine tool room at theMercedes-Benz Training Center.At Landmark Aviation, corporate jets arerepaired and maintained at durable Lista workbencheswith the Nexus Accessory System.Cabinet pedestals with plenty of drawersprovide storage for parts and tools, and thecompanion mobile cabinet allows additionalstorage with the convenience of mobility.Mobile industrial workbenchescan be moved right to the pointof use, even in a crowded, busymachine shop.50

Heavy-duty Lista industrial workbenchescombine with Listastacked cabinets to create anorganized, efficient workspacethat stands up to the challengesof this marine emergencyresponse company.Sturdy industrial workbenches atthe Con Edison CorporateLearning Center have rugged galvanizedsteel worksurfaces forextra durability. Specialized testingequipment and heavy-dutycomponents on the work surfacesenhance this durable, ergonomicworkspace.A wide range of Lista workbenchesbrings Toyota RacingDevelopment up to speed in ahost of different departments.An industrial workbench providesa rock-solid platform forthis inspection station.51

Easy-Order Industrial WorkbenchesEasy-Order workbenches include MPWidth (22 3 ⁄16" wide) cabinet pedestals(see page 67 for description). Customerspecifiedcabinet pedestals (shown ingray) must be ordered separately – forEasy-Order cabinet pedestals, seepages 62-63 for Narrow Width cabinetsand pages 68-69 for MP Widthcabinets.Workbenches with 2 ListaLegsOverall bench height including worksurfaceis 35 1 ⁄4". Includes:• 2 Lista Legs (legs are 33 1 ⁄2" high)• 1 stringerWorkbenches with 2 ListaLegs and 1 DrawerOverall bench height including work -surface is 35 1 ⁄4". Includes:• 2 Lista Legs (legs are 33 1 ⁄2" high)• 1 stringer• 1 WBHC150-1 hanging cabinetWorkbenches with 1 ListaLeg and 1 CabinetOverall bench height including work -surface is 35 1 ⁄4". Includes:• 1 Lista Leg (leg is 33 1 ⁄2" high)• 1 stringer• 1 MP0600-0402NA-F6RG cabinetHow to order an Easy-OrderIndustrial Workbench1. Select Easy-Order workbenchconfiguration.2. ■ Select worksurface style. Seepage 56 for descriptions.LTS = Lista TopGLS = Galvanized steelPLS = Plastic laminateBTS = Butcher blockPART NO.WB1000-■■■PART NO.WB1100-■■■PART NO.WB1200-■■■All worksurfaces have a standardsquare edge and are 30"deep.3. ■ Select worksurface size.4830 = 48" long x 30" deep6030 = 60" long x 30" deep7230 = 72" long x 30" deepPART NO. INCLUDESWB1001-■■■ back stop and end stopsPART NO. INCLUDESWB1101-■■■ back stop and end stopsPART NO. INCLUDESWB1201-■■■ back stop and end stops4. ■ Select paint color. For colorchart, see back cover or below.EXAMPLE: to order a WB1201 workbenchwith a 72" long plastic laminateworksurface and Bright Blue paint, thepart number would beWB1201-PLS7230BB.5. Select cabinet pedestals (forWB03xx and WB06xx configurations).For Easy-Order cabinetpedestals, see pages 62-63 forNarrow Width cabinets and pages68-69 for MP Width cabinets.PART NO. INCLUDESWB1002-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB1102-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB1202-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsEXAMPLE (CUSTOMER-SPECIFIEDCABINETS): to order a WB0300 workbenchwith a 72" long plastic laminateworksurface, and an MP0750-0601NAcabinet pedestal with Bright Bluepaint, the workbench part numberwould be WB0300-PLS7230BB, andthe cabinet part number would beMP0750-0601NA-NBRGBB.52PART NO. INCLUDESWB1003-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsPART NO. INCLUDESWB1103-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsPART NO. INCLUDESWB1203-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stops■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

Workbenches with 1 Legand 1 Customer-SpecifiedCabinetOverall bench height including worksurfaceis 35 1 ⁄4". Includes:• 1 Lista Leg (leg is 33 1 ⁄2" high)• 1 stringer• cabinet pedestal chosen by customerWorkbenches with 2 CabinetsOverall bench height including worksurfaceis 35 1 ⁄4". Includes:• 1 MP0600-0402NA-F6KA cabinet*• 1 MP0600-0202NA-F6KA cabinet**includes keyed-alike locksOverall bench height including worksurfaceis 35 1 ⁄4". Includes:• 1 MP0600-0501NA-F6KA cabinet*• 1 MP0600-0204D-F6KA cabinet**includes keyed-alike locksWorkbenches with2 Customer-SpecifiedCabinetsOverall bench height including worksurfaceis 35 1 ⁄4". Includes:• 2 cabinet pedestals chosen bycustomerPART NO.WB0300-■■■PART NO.WB1400-■■■PART NO.WB1500-■■■PART NO.WB0600-■■■PART NO. INCLUDESWB0301-■■■ back stop and end stopsPART NO. INCLUDESWB1401-■■■ back stop and end stopsPART NO. INCLUDESWB1501-■■■ back stop and end stopsPART NO. INCLUDESWB0601-■■■ back stop and end stopsPART NO. INCLUDESWB0302-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB1402-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB1502-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB0602-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB0303-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsPART NO. INCLUDESWB1403-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stops■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■PART NO. INCLUDESWB1503-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsFW (White paint)PART NO. INCLUDESWB0603-■■■ 12" adjustable riser shelfw/back stopworkbench back stop andend stops53

Easy-Order Industrial Mobile WorkbenchesEasy-Order mobile workbenchesinclude MP Width (22 3 ⁄16" wide) cabinetpedestal (see page 68 for description).They include 2 fixed and 2 swivel6" x 2" casters with wheel locks.Mobile Workbenches with2 Lista Mobile LegsOverall bench height including worksurfaceis 35 1 ⁄4". Includes:Mobile Work benches with2 Mobile Legs and 1 DrawerOverall bench height including worksurfaceis 35 1 ⁄4". Includes:Mobile Work benches with1 Mobile Leg and 1 CabinetOverall bench height including worksurfaceis 37 1 ⁄4". Includes:How to order an Easy-OrderIndustrial Mobile Workbench• 2 Lista Mobile Legs (legs are 33 1 ⁄2"high)• 1 stringer• 2 Lista Mobile Legs (legs are 33 1 ⁄2"high)• 1 stringer• 1 WBHC150-1 hanging cabinet• 1 Lista Mobile Leg (leg is 35 1 ⁄2"high)• 1 stringer• 1 MP0600-0402NA cabinet1. Select Easy-Order workbenchconfiguration.2. ■ Select worksurface style.See page 56 for descriptions.LTS = Lista TopGLS = Galvanized steelPLS = Plastic laminateBTS = Butcher blockPART NO.WB2000-■■■PART NO.WB2100-■■■PART NO.WB2200-■■■All worksurfaces have a standardsquare edge and are 30"deep.3. ■ Select worksurface size.4830 = 48" long x 30" deep6030 = 60" long x 30" deep7230 = 72" long x 30" deep4. ■ Select paint color. For colorchart, see back cover or below.EXAMPLE: to order a WB2201 workbenchwith a 72" long plastic laminateworksurface and Bright Blue paint, thepart number would beWB2201-PLS7230BB.PART NO. INCLUDESWB2001-■■■ back stop and end stopsPART NO. INCLUDESWB2101-■■■ back stop and end stopsPART NO. INCLUDESWB2201-■■■ back stop and end stopsPART NO. INCLUDESWB2002-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB2102-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB2202-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB2003-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsPART NO. INCLUDESWB2103-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsPART NO. INCLUDESWB2203-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stops54■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

Mobile Work benches with 1 Mobile Leg and 1 CabinetOverall bench height including worksurfaceis 37 1 ⁄4". Includes:• 1 Lista Mobile Leg (leg is 35 1 ⁄2"high)• 1 stringer• 1 MP0600-0202NA cabinetOverall bench height including worksurfaceis 37 1 ⁄4". Includes:• 1 Lista Mobile Leg (leg is 35 1 ⁄2"high)• 1 stringer• 1 MP0600-0501NA cabinetPART NO.WB2300-■■■PART NO.WB2400-■■■This corporate aircraft operator wanted to upgradeits maintenance facility to match the quality of its aircraft.Several mobile benches, including this mobileinspection station, are used in the company’s hangarand support shop.PART NO. INCLUDESWB2301-■■■ back stop and end stopsPART NO. INCLUDESWB2401-■■■ back stop and end stopsPART NO. INCLUDESWB2302-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB2402-■■■ stationary riser shelf withback stop + full rear panelworkbench end stopsPART NO. INCLUDESWB2303-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsPART NO. INCLUDESWB2403-■■■ 12" adjustable riser shelfwith back stopworkbench back stop andend stopsThe mobile workbench used at this electronic repairfacility brings repair tools and parts right to thepoint of use, without sacrificing durability anddrawer storage space. The companion mobile storagecabinet (designed to be stored between theworkbench cabinet pedestals) adds to the flexibilityof this arrangement. For information on orderingmobile workbenches with two cabinet pedestals,contact your Lista distributor.■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■FW (White paint)55

Industrial Workbench WorksurfacesLista worksurfaces are alleasy to maintain, rugged, anddurable.Worksurfaces come in 48",60", 72", 84", 90" and 96"lengths, and are 24", 30" or 36"deep, depending on worksurface.Other sizes are available,and certain worksurfaces areavailable with a bullnose frontedge.Butcher BlockSatin finish 1 3 ⁄4" thick hardwood.Available in standard square edge(shown above) or bullnose front edge.To order a bullnose edge, add “BN” tothe end of the part number.PART NO. LENGTH24" deepBTOP-4824 48"BTOP-6024 60"BTOP-7224 72"BTOP-8424 84"BTOP-9024 90"BTOP-9624 96"30" deepBTOP-48 48"BTOP-60 60"BTOP-72 72"BTOP-84 84"BTOP-90 90"BTOP-96 96"36" deepBTOP-4836 48"BTOP-6036 60"BTOP-7236 72"BTOP-8436 84"BTOP-9036 90"BTOP-9636 96"Lista Top1 3 ⁄4" thick worksurface with woodcore and 3 ⁄8" thick sanded oil-resistantpressed wood, top and bottom.PART NO. LENGTH30" deepLTOP-48 48"LTOP-60 60"LTOP-72 72"LTOP-84* 84"LTOP-90* 90"LTOP-96* 96"36" deepLTOP-4836 48"LTOP-6036 60"LTOP-7236 72"LTOP-8436* 84"LTOP-9036* 90"LTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)Galvanized Steel OverWoodLista Top with additional heavy-gaugegalvanized steel cover that is fitted overtop and sides of wood core, 1 13 ⁄16"thick.PART NO. LENGTH30" deepLSTOP-48 48"LSTOP-60 60"LSTOP-72 72"LSTOP-84 84"LSTOP-90 90"LSTOP-96 96"36" deepLSTOP-4836 48"LSTOP-6036 60"LSTOP-7236 72"LSTOP-8436 84"LSTOP-9036 90"LSTOP-9636 96"Stainless Steel Over WoodWorksurface is constructed of durable,heavy gauge stainless steel, fitted overtop and sides of wood core, 1 13 ⁄16"thick.PART NO. LENGTH30" deepLSSTOP-48 48"LSSTOP-60 60"LSSTOP-72 72"LSSTOP-84 84"LSSTOP-90 90"LSSTOP-96 96"36" deepLSSTOP-48X36 48"LSSTOP-60X36 60"LSSTOP-72X36 72"LSSTOP-84X36 84"LSSTOP-90X36 90"LSSTOP-96X36 96"Plastic LaminateParticle board core with plastic laminatedtop and sides. 1 9 ⁄16" thick. Dovegray is standard but other colors areavailable on request. Avail able instandard square edge or bullnose frontedge (shown above). To order a bullnoseedge, add “BN” to the end of thepart number.PART NO. LENGTH24" deepPTOP-4824 48"PTOP-6024 60"PTOP-7224 72"PTOP-8424* 84"PTOP-9024* 90"PTOP-9624* 96"30" deepPTOP-48 48"PTOP-60 60"PTOP-72 72"PTOP-84* 84"PTOP-90* 90"PTOP-96* 96"36" deepPTOP-4836 48"PTOP-6036 60"PTOP-7236 72"PTOP-8436* 84"PTOP-9036* 90"PTOP-9636* 96"*requires additional support (third leg or hatsection stiffener)56

Industrial Workbench Under-Worksurface AccessoriesLista LegsEach welded onepieceleg assembly is2 1 ⁄ 2" wide heavygauge steel. Each foothas a bottom hole forleveling glide (included)or anchoring. Height shown includesleveling glide.PART NO. WORKSURFACE DEPTH27 1 ⁄2" (700mm) highWBLL27.5X22.5 24" (610mm)WBLL27.5X28.5 30" (762mm)WBLL27.5X34.5 36" (915mm)29 1 ⁄2" (750mm) highWBLL29.5X22.5 24" (610mm)WBLL29.5X28.5 30" (762mm)WBLL29.5X34.5 36" (915mm)31 1 ⁄2" (800mm) highWBLL31.5X22.5 24" (610mm)WBLL31.5X28.5 30" (762mm)WBLL31.5X34.5 36" (915mm)33 1 ⁄2" (850mm) highWBLL33.5X22.5 24" (610mm)WBLL33.5X28.5 30" (762mm)WBLL33.5X34.5 36" (915mm)35 1 ⁄2" (900mm) highWBLL35.5X22.5 24" (610mm)WBLL35.5X28.5 30" (762mm)WBLL35.5X34.5 36" (915mm)39 1 ⁄2" (1000mm) highWBLL39.5X22.5 24" (610mm)WBLL39.5X28.5 30" (762mm)WBLL39.5X34.5 36" (915mm)Lista Mobile LegsSame basic constructionas the Lista Leg but with2 factory mounted 6"heavy duty casters. Legis available with eitherfixed casters or swivelcasters with wheel locks.Requires stringer.Fixed CastersPART NO.WORKSUR. DPTH.33 1 ⁄2" (850mm) overall heightWBLL/M33.5X22.5R6B 24" (610mm)WBLL/M33.5X28.5R6B 30" (762mm)WBLL/M33.5X34.5R6B 36" (915mm)35 1 ⁄2" (900mm) overall heightWBLL/M35.5X22.5R6B 24" (610mm)WBLL/M35.5X28.5R6B 30" (762mm)WBLL/M35.5X34.5R6B 36" (915mm)Swivel CastersPART NO.WORKSUR. DPTH.33 1 ⁄2" (850mm) overall heightWBLL/M33.5X22.5S6B 24" (610mm)WBLL/M33.5X28.5S6B 30" (762mm)WBLL/M33.5X34.5S6B 36" (915mm)35 1 ⁄2" (900mm) overall heightWBLL/M35.5X22.5S6B 24" (610mm)WBLL/M35.5X28.5S6B 30" (762mm)WBLL/M35.5X34.5S6B 36" (915mm)Panel LegsSame basic constructionas theLista Leg with aformed panelwelded in place.Includes levelingglides.PART NO.WORKSURFACE DPTH.27 1 ⁄2" (700mm) highWBLL /P27.5X22.5 24" (610mm)WBLL /P27.5X28.5 30" (762mm)WBLL /P27.5X34.5 36" (915mm)29 1 ⁄2" (750mm) highWBLL /P29.5X22.5 24" (610mm)WBLL /P29.5X28.5 30" (762mm)WBLL /P29.5X34.5 36" (915mm)31 1 ⁄2" (800mm) highWBLL /P31.5X22.5 24" (610mm)WBLL /P31.5X28.5 30" (762mm)WBLL /P31.5X34.5 36" (915mm)33 1 ⁄2" (850mm) highWBLL /P33.5X22.5 24" (610mm)WBLL /P33.5X28.5 30" (762mm)WBLL /P33.5X34.5 36" (915mm)39 1 ⁄2" (1000mm) highWBLL /P39.5X22.5 24" (610mm)WBLL /P39.5X28.5 30" (762mm)WBLL /P39.5X34.5 36" (915mm)MobilePanel LegsSame basic constructionas thePanel Leg butwith 2 factorymounted 6"heavy duty casters.Availablewith either fixed casters or swivel casterswith wheel locks.Fixed CastersPART NO.WORKSUR. DPTH.33 1 ⁄2" (850mm) overall heightWBLL/MP33.5X22.5R6B 24" (610mm)WBLL/MP33.5X28.5R6B 30" (762mm)WBLL/MP33.5X34.5R6B 36" (915mm)35 1 ⁄2" (900mm) overall heightWBLL/MP35.5X22.5R6B 24" (610mm)WBLL/MP35.5X28.5R6B 30" (762mm)WBLL/MP35.5X34.5R6B 36" (915mm)Swivel CastersPART NO.WORKSUR. DPTH.33 1 ⁄2" (850mm) overall heightWBLL/MP33.5X22.5S6B 24" (610mm)WBLL/MP33.5X28.5S6B 30" (762mm)WBLL/MP33.5X34.5S6B 36" (915mm)35 1 ⁄2" (900mm) overall heightWBLL/MP35.5X22.5S6B 24" (610mm)WBLL/MP35.5X28.5S6B 30" (762mm)WBLL/MP35.5X34.5S6B 36" (915mm)Stringers/Foot RestsTelescoping heavy gauge U channel with2 mounting holes on each end plate.PART NO.WORKSURF. LENGTHWBLST48/■■ 48"WBLST60/■■ 60"WBLST72/■■ 72"WBLST84/■■ 84"WBLST90/■■ 90"WBLST96/■■ 96"Bottom ShelvesTelescoping heavy gauge steel shelf,12" deep, for use as storage or foot rest.150 lb. weight capacity for evenly distributedloads, except as noted.PART NO.WORKSURF. LENGTHWBLBS48/■■ 48"WBLBS60/■■ 60"WBLBS72/■■ 72"WBLBS84/■■ 84"WBLBS90/■■* 90"WBLBS96/■■* 96"*100 lb. weight capacityHow to order stringers andbottom shelves1. Select part number based onworkbench length.2. ■ Specify left-hand (facing theworkbench) bench support.LLNWMP= Lista Leg or Panel Leg= NW cabinet= MP cabinet3. ■ Specify right-hand (facingthe workbench) bench support.LLNWMP= Lista Leg or Panel Leg= NW cabinet= MP cabinetEXAMPLE: to order a bottom shelffor a workbench with a 72" worksurface,an MP Width cabinet as theleft-hand pedestal and a Lista Leg asthe right-hand support, the partnumber would be WBLBS72/MPLL.Privacy PanelsSteel panel attaches to leg or cabinetand runs full length of worksurface.22 3 ⁄4" high.PART NO.WORKSURF. LENGTHWBLPP22.8X48 48"WBLPP22.8X60 60"WBLPP22.8X72 72"WBLPP22.8X84 84"WBLPP22.8X90 90"WBLPP22.8X96 96"Leg HeightsUse the leg heights shown below tomatch a cabinet pedestal in a legplus-cabinetbelow-worksurfaceconfiguration. For a selection ofdrawer cabinets to serve as pedes talsfor workbenches, see pages 60-69.LEG HEIGHT MATCHES CAB. PEDESTAL27 1 ⁄2" 600 height without base29 1 ⁄2" 600 height with 2" base31 1 ⁄2" 600 height with 4" base33 1 ⁄2" 600 height with 6" base750 height without base35 1 ⁄2"(mobile) 600 height w/mobile base39 1 ⁄2" 900 height without base750 height with 6" base57

Industrial Workbench Above-Worksurface AccessoriesThe bench components onthis page allow you to cus-58tomize above the worksurfacefor your particular needs.All parts must be orderedseparately to match the lengthof the worksurface you havechosen.How to order workbenchabove-worksurface accessories1. Select worksurface length anddepth (see page 56).2. Select back stop, end stop, shelfor panel part numbers to correspondto both length and depthof worksurface.3. Specify paint color from thechart on the back cover.Overhead CabinetsFor a selection of overhead cabinetsfor additional storage above 15"deepstationary riser shelves, see ourGeneral Storage Catalog.Above-worksurface accessoriesusing the Nexus System areshown on pages 76-85.Back Stops and End StopsSteel back stops and end stops haverounded corners. Stops extend approximately3" above the worksurface. Foruse with worksurfaces or shelves.Back StopsPART NO. WORKSURFACE LENGTHWBTBS-48 48"WBTBS-60 60"WBTBS-72 72"WBTBS-84 84"WBTBS-90 90"WBTBS-96 96"End Stops (pair)PART NO. WORKSURFACE DEPTHWBTES-22 24"WBTES-28 30"WBTES-34 36"Adjustable Riser ShelfAssembliesShelves measure 1 1 ⁄4" thick x 12" deep.Shelf height can be adjusted in 1 1 ⁄2"increments from 12"-18". A steel backstop is available for the shelf assembly(ordered separately – see above).Includes the number of adjust able supportbrackets shown in the charts.Assemblies with PlasticLaminate ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS90P 90" 3ARS96P 96" 3Assemblies w/Butcher Block ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48B 48" 2ARS60B 60" 2ARS72B 72" 2ARS84B 84" 2ARS90B 90" 3ARS96B 96" 3Adjustable Support BracketBracket supports riser shelf. May berequired to supplement the supportsincluded with shelf assemblies (seecharts above) for support of longshelves or shelves carrying heavy loads.PART NO.ARS-BRStationary Riser Shelves –10 1 ⁄2" deepMade of steel to support heavy loads.Shelf is 13 1 ⁄2" overall height (12"clearance). Optional louvered closedback rear panel is shown above.Open Riser ShelvesOpen shelf (open back, no shelf back stop)PART NO. WORKSURFACE LENGTHSRS48 48"SRS60 60"SRS72 72"SRS84 84"SRS90 90"SRS96 96"Open Riser Shelves with ShelfBack StopShelf with back stop (open back)PART NO. WORKSURFACE LENGTHSRS48-1 48"SRS60-1 60"SRS72-1 72"SRS84-1 84"SRS90-1 90"SRS96-1 96"Riser Shelves with Full PanelSolid closed back, with shelf back stopPART NO. WORKSURFACE LENGTHSRS48-2 48"SRS60-2 60"SRS72-2 72"SRS84-2 84"SRS90-2 90"SRS96-2 96"Pegboard closed back, with shelf back stopPART NO. WORKSURFACE LENGTHSRS48-2P 48"SRS60-2P 60"SRS72-2P 72"SRS84-2P 84"SRS90-2P 90"SRS96-2P 96"Louvered closed back, with shelf back stop(shown above)PART NO. WORKSURFACE LENGTHSRS48-2L 48"SRS60-2L 60"SRS72-2L 72"SRS84-2L 84"SRS90-2L 90"SRS96-2L 96"Stationary Riser Shelves –15" deepProvides additional storage depth.Particularly suited for supporting overheadcabinets. Shelf is 13 1 ⁄2" overallheight (12" clearance). Optional pegboardclosed back rear panel is shownabove.Open Riser ShelvesOpen shelf (open back, no shelf back stop)PART NO. WORKSURFACE LENGTHSRS48-15D 48"SRS60-15D 60"SRS72-15D 72"SRS84-15D 84"SRS90-15D 90"SRS96-15D 96"Open Riser Shelves with ShelfBack StopShelf with back stop (open back)PART NO. WORKSURFACE LENGTHSRS48-1-15D 48"SRS60-1-15D 60"SRS72-1-15D 72"SRS84-1-15D 84"SRS90-1-15D 90"SRS96-1-15D 96"Riser Shelves with Full PanelSolid closed back, with shelf back stopPART NO. WORKSURFACE LENGTHSRS48-2-15D 48"SRS60-2-15D 60"SRS72-2-15D 72"SRS84-2-15D 84"SRS90-2-15D 90"SRS96-2-15D 96"Pegboard closed back, with shelf back stop(shown above)PART NO. WORKSURFACE LENGTHSRS48-2P-15D 48"SRS60-2P-15D 60"SRS72-2P-15D 72"SRS84-2P-15D 84"SRS90-2P-15D 90"SRS96-2P-15D 96"Louvered closed back, with shelf back stopPART NO. WORKSURFACE LENGTHSRS48-2L-15D 48"SRS60-2L-15D 60"SRS72-2L-15D 72"SRS84-2L-15D 84"SRS90-2L-15D 90"SRS96-2L-15D 96"

How to Order Industrial Workbench Custom Configurations3These are the basic stepsrequired for ordering customworkbenches from Lista.313TO ORDER AN EASY-ORDERCOMBINATION (WORK-BENCH WITH PRECONFIG-URED ACCESSORIES):• PAGES 52-53 FOR INDUS-TRIAL WORKBENCHES• PAGES 54-55 FOR INDUS-TRIAL MOBILE WORK-BENCHES2221 Select worksurfaceSelect the worksurface that bestsuits your needs from the choices onpage 56. Choose the worksurfacelength, depth and style that you prefer.2 Select below-worksurfaceaccessories or basesSelect either 2-leg,1-leg-with-cabinet or2-cabinet configuration. Legs, stringers,bottom shelves and privacy panels areshown on page 57. Hanging cabinetsare shown on page 36. To select acabinet pedestal(s), please seepages 60-69.3 Select above-worksurfaceaccessoriesSelect the back stop and endstops (page 58), shelves (stationaryor adjustable – seepage 58) and/or Nexus Systemcomponents (pages 76-85) thatsuit your needs.4 Select colorsSelect a color from the chart onthe back cover. Cabinet housingand drawer fronts can be differentcolors, but drawer interiors arealways gray.Sample Workbench OrderQTY. PART NO. DESCRIPTION1 BTOP-60 butcher block worksurface1 WBLL33.5X28.5 Lista Leg1 WBLST60LLMP stringer1 MP0600-0402-F6RGBB Easy-Order cabinet pedestal1 WBTBS-60 back stop1 ARS60B butcher block adjustableriser shelf1 WBTBS-60 shelf back stopBB bright blue paint1222333459

NW Narrow Width Cabinets – 16 7 ⁄8" wide x 28 1 ⁄2" deepSpace-saving solutions forevery workspace• Ideal workbenchpedestals• The right storage solutionwhen space is ata premiumWE OFFER A NUMBEROF PRE-CONFIGUREDEASY-ORDER COMBI-NATIONS• NARROW WIDTHCABINETS:PAGES 62-63• NARROW WIDTHMOBILE CABINETS:PAGE 64Narrow Width cabinets serve asworkbench pedestals at thisbiotech manufacturer’s centralutility plant’s maintenance hub.The department’s electricians,mechanics and technicians eachhave a workstation which, inaddition to housing their computer,tools and test equipment,also has storage space for personalitems.60

➤➤NW Narrow Width Custom Cabinet OrderingNWFor detailed directions onordering custom cabinets andcomplete descriptions of theoptions on this page, pleasesee our General StorageCatalog.12 1 ⁄2"(318MM)* ➤19 UNITS➤24"(610MM)*36 UNITS*INSIDE DIMENSIONS1 Select cabinet housingLista’s steel cabinet housings offerstrength and flexibility. Drawers andshelves can be assembled in anysequence.16 7 ⁄8" wide x 28 1 ⁄2" deep(428mm x 725mm)PART NO. OVERALL HEIGHT(without base)NW300 15 3 ⁄4" (400mm)NW450 21 5 ⁄8" (550mm)NW600 27 1 ⁄ 2" (700mm)NW750 33 1 ⁄ 2" (850mm)NW900 39 3 ⁄8" (1000mm)NW1225 52 3 ⁄16" (1325mm)2 Select lockCabinets come equipped with an individuallock (RG) and 2 keys. To selectother locking options, choose from thechart below or see our General StorageCatalog.PART NO.RGKAMANLLOCK TYPEindividual lockkeyed alike lockmaster lockno lock wanted3 Select baseLista offers a wide array of cabinetbases to suit any need. For descriptions,see our General Storage Catalog.Frame BasesPART NO. HEIGHT RAISE 600 CABS. TONW-2 2" (50mm) desk heightNW-4 4" (100mm) low bench heightNW-6 6" (150mm) standard benchheightMobile BasesMobile bases include a set of 2 fixedand 2 swivel casters with wheel locks.Mobile bases not recommended for usewith 1225 height cabinets.PART NO. CASTERS OAH CAP.Use with 1 NW housingTMMB-19/3.5 3 1 ⁄ 2"x 1 1 ⁄4"4 3 ⁄4" 900 lb.CB-NW4X1 4"x 1 1 ⁄4" 5 5 ⁄8" 1000 lb.CB-NW4B 4"x 2" 6 1 ⁄4" 1400 lb.Use with 2 NW housings on 1 pan baseMBP-NW/NW4B 4"x 2" 6 1 ⁄4" 1400 lb.MBP-NW/NW6B 6"x 2" 8 1 ⁄8" 2400 lb.4 Select topLista tops are attractive, durable complementsto any cabinet. Top depth is28 1 ⁄2". For top descriptions, seepage 42.PART NO. DESCRIPTION HT.NW-RT retainer top with 3 ⁄4"ribbed matNW1BCT butcher block 1 3 ⁄4"NW1PCT plastic laminate 1 9 ⁄16"NW1RCT phenolic resin 1"5 Select drawersLista drawers, with their unique construction,are the most stable andspace-maximizing in the industry.150 lb. (70kg) maximum load capacity.PART NO. USABLE HT. SIDEWALL HT.NW75N 2 3 ⁄8" (61mm) 2" (52mm)NW100N 3 3 ⁄8" (86mm) 3" (77mm)NW125N 4 3 ⁄8" (111mm) 3" (77mm)NW150N 5 1 ⁄4" (133mm) 5" (127mm)NW175N 6 1 ⁄4" (159mm) 5" (127mm)NW200N 7 1 ⁄4" (185mm) 7" (177mm)NW225N 8 1 ⁄4" (203mm) 7" (177mm)NW250N 9 1 ⁄4" (229mm) 8 15 ⁄16"(227mm)NW300N-FFH* 11" (279mm) 10" (254mm)NW325N-FFH* 12" (305mm) 10" (254mm)*file drawer (for letter files only)5 Select shelves anddoorsShelvesShelves allow storage of bulky items inclose proximity to high density drawerstorage.Adjustable ShelfPART NO. USABLE WIDTH USABLE DEPTHNW-AS 14 3 ⁄8" (366mm) 24 1 ⁄4" (616mm)Bottom ShelfPART NO. USABLE WIDTH USABLE DEPTHNW-BS 14 7 ⁄16"(367mm) 23 3 ⁄4" (604mm)Flush Hinged DoorsDoors protect cabinet contents storedon shelves. Door with integrated handleis reversible in field to allow door toopen in opposite direction. To order,door opening orientation (“R” for rightor “L” for left) must be written in placeof the red box (■) in the part number.Only bottom and adjustable shelvesmay be installed behind flush doors.PART NO. HEIGHTFD300-19■* 11 13 ⁄16" (300mm)FD450-19■* 17 11 ⁄16" (450mm)FD600-19■* 23 5 ⁄8" (600mm)FD750-19■ 29 9 ⁄16" (750mm)FD900-19■ 35 7 ⁄16" (900mm)*limit: 1 adjustable shelf and 1 bottom shelf6 Select drawer partitionsand dividers• Narrow Width drawer interior sets,page 65• Individual drawer partitioningaccessories, see our GeneralStorage Catalog7 Select colorsTo order cabinet housing and drawerfront paint colors, see back cover.Lista’s modular buildingblock system means that yourNarrow Width cabinets can beconfigured to exactly suit yourrequirements.To configure your customcabinet, simply follow the stepsshown in the charts to the left.Total drawer and/or doormodel numbers must add up tothe model number of the housing.EXAMPLE: 900 housing•100 drawer100 drawer150 drawer150 drawer200 drawer200 drawerEXAMPLE: 900 housing with flushhinged door•150 drawer150 drawer600 flushdoorTotal drawer height = 900Total drawer and doorheight = 90061

NW Narrow Width Easy-Order Cabinet CombinationsNW600 Cabinets for Workbench Pedestals27 1 ⁄ 2" highNW750 Cabinets forWorkbench Pedestals33 1 ⁄ 2" highHow to read the charts on thispageThe 2 columns to the right of eachcabinet illustration indicate:DRAWER HT.2" (75N) 2122" (75N) 2122" (75N) 1072" (75N) 1073" (100N) 1073" (100N) 1073" (100N) 107DRAWER INTERIORDRAWER HT.3" (100N) 2125" (150N) 1045" (150N) 1047" (200N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR2" (75N) 2122" (75N) 2122" (75N) 1072" (75N) 1073" (100N) 1043" (100N) 1073" (100N) 1075" (150N) 104• Drawer heights• Drawer interior sets (shown onpage 65)The chart below the illustrationindicates:PART NO.DRWS. COMPTS.NW0600-0701N-■■■ 7 -NW0600-0701NA-■■■ 7 59PART NO.DRWS. COMPTS.NW0600-0402N-■■■ 4 -NW0600-0402NA-■■■ 4 24PART NO.DRWS. COMPTS.NW0750-0801N-■■■ 8 -NW0750-0801NA-■■■ 8 60• Part numbers• Number of drawers• Number of drawer compartmentscreated by the interior sets (shownon page 65)How to order a Narrow WidthEasy-Order CabinetDRAWER HT.2" (75N) 1052" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 104DRAWER INTERIORDRAWER HT.DRAWER INTERIOR5" (150N) 1045" (150N) 10411" (300N-FFH) FILE DRAWERDRAWER HT.2" (75N) 2122" (75N) 2122" (75N) 1072" (75N) 1073" (100N) 1075" (150N) 1047" (200N) 104DRAWER INTERIOR1. Select Easy-Order Cabinet Combi -na tion either without or with drawerinterior sets (designated by an “A”at the end of the part number – i.e.,NW0600-0601NA).PART NO.DRWS. COMPTS.NW0600-0601N-■■■ 6 -NW0600-0601NA-■■■ 6 42PART NO.DRWS. COMPTS.NW0600-0301N-■■■ 3 -NW0600-0301NA-■■■ 3 8PART NO.DRWS. COMPTS.NW0750-0701N-■■■ 7 -NW0750-0701NA-■■■ 7 532. ■ Select base type.NB = noneF2 = 2" frame baseF4 = 4" frame baseF6 = 6" frame baseFor additional bases, see page 61;for Easy-Order mobile combinations,see page 64.3. ■ Select lock type.NL = noneRG = individualKA = keyed-alikeMA = masterFor additional lock options, see ourGeneral Storage Catalog.DRAWER HT.2" (75N) 0182" (75N) 2123" (100N) 2125" (150N) 1047" (200N) 104DRAWER INTERIORPART NO.DRWS. COMPTS.NW0600-0501N-■■■ 5 -NW0600-0501NA-■■■ 5 50DRAWER HT.DRAWER INTERIOR11" (300N-FFH) FILE DRAWER11" (300N-FFH) FILE DRAWERPART NO.DRWS. COMPTS.NW0600-0201N-■■■ 2 -DRAWER HT.2" (75N) 0182" (75N) 0183" (100N) 2125" (150N) 1045" (150N) 1047" (200N) 104DRAWER INTERIORPART NO.DRWS. COMPTS.NW0750-0601N-■■■ 6 -NW0750-0601NA-■■■ 6 604. ■ Select paint color. For colorchart, see the back cover or below.DRAWER HT.2" (75N) 0183" (100N) 2124" (125N) 104DRAWER INTERIORDRAWER HT.5" (150N) 104DRAWER INTERIORDRAWER HT.2" (75N) 0183" (100N) 2124" (125N) 1045" (150N) 104DRAWER INTERIOREXAMPLE: to order an NW0600-0402N cabinet with a 6" frame base,an individual lock and Bright Bluepaint, the part number would beNW0600-0402N-F6RGBB (shownin photo at top of page).11" (300N-FFH) FILE DRAWERPART NO.DRWS. COMPTS.NW0600-0401N-■■■ 4 -NW0600-0401NA-■■■ 4 34450 DOORBOTTOM SHELFPART NO.DRWS. COMPTS.NW0600-0202N-■■■ 1 -NW0600-0202NA-■■■ 1 411" (300N-FFH) FILE DRAWERPART NO.DRWS. COMPTS.NW0750-0501N-■■■ 5 -NW0750-0501NA-■■■ 5 3862■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

16 7 ⁄8" wide x 28 1 ⁄2" deep NWNW900 Cabinets39 3 ⁄8" highNW1225 Cabinets52 3 ⁄16" highDRAWER HT.DRAWER INTERIOR5" (150N) 107DRAWER HT.3" (100N) 2123" (100N) 2125" (150N) 1045" (150N) 1049" (250N) -DRAWER INTERIORDRAWER HT.2" (75N) 0182" (75N) 0182" (75N) 2122" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 1045" (150N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR5" (150N) 1075" (150N) 1075" (150N) 1047" (200N) 1049" (250N) 1046" (175N) 10411" (300N-FFH) FILE DRAWER11" (300N-FFH) FILE DRAWER11" (300N-FFH) FILE DRAWERPART NO.DRWS. COMPTS.NW0750-0502N-■■■ 5 -NW0750-0502NA-■■■ 5 32PART NO.DRWS. COMPTS.NW0900-0901N-■■■ 9 -NW0900-0901NA-■■■ 9 89PART NO.DRWS. COMPTS.NW0900-0501N-■■■ 5 -NW0900-0501NA-■■■ 5 26PART NO.DRWS. COMPTS.NW1225-0501N-■■■ 5 -NW1225-0501NA-■■■ 5 11DRAWER HT.DRAWER INTERIOR11" (300N-FFH) FILE DRAWERDRAWER HT. DRAWER INTERIOR5" (150N) 1075" (150N) 1047" (200N) 1079" (250N) 104DRAWER HT.2" (75N) 2122" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 1047" (200N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR7" (200N) 1047" (200N) 1079" (250N) 1049" (250N) 10811" (300N-FFH) FILE DRAWER11" (300N-FFH) FILE DRAWER12" (325N-FFH) FILE DRAWERPART NO.DRWS. COMPTS.NW0750-0401N-■■■ 4 -NW0750-0401NA-■■■ 4 22PART NO.DRWS. COMPTS.NW0900-0801N-■■■ 8 -NW0900-0801NA-■■■ 8 60PART NO.DRWS. COMPTS.NW0900-0401N-■■■ 4 -NW0900-0401NA-■■■ 4 23PART NO.DRWS. COMPTS.NW1225-0401N-■■■ 4 -DRAWER HT. DRAWER INTERIOR5" (150N) 10411" (300N-FFH) FILE DRAWERDRAWER HT.2" (75N) 0182" (75N) 2123" (100N) 2125" (150N) 1045" (150N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR11" (300N-FFH) FILE DRAWER11" (300N-FFH) FILE DRAWER11" (300N-FFH) FILE DRAWER5" (150N) 1047" (200N) 10411" (300N-FFH) FILE DRAWERPART NO.DRWS. COMPTS.NW0750-0301N-■■■ 3 -NW0750-0301NA-■■■ 3 4PART NO.DRWS. COMPTS.NW0900-0701N-■■■ 7 -NW0900-0701NA-■■■ 7 58PART NO.DRWS. COMPTS.NW0900-0301N-■■■ 3 -DRAWER HT. DRAWER INTERIOR5" (150N) 104600 DOORDRAWER HT.3" (100N) 2123" (100N) 2125" (150N) 1045" (150N) 1045" (150N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR5" (150N) 104750 DOORADJUSTABLE SHELFADJUSTABLE SHELF9" (250N) -BOTTOM SHELFBOTTOM SHELFPART NO.DRWS. COMPTS.NW0750-0302N-■■■ 1 -NW0750-0302NA-■■■ 1 4PART NO.DRWS. COMPTS.NW0900-0601N-■■■ 6 -NW0900-0601NA-■■■ 6 36PART NO.DRWS. COMPTS.NW0900-0302N-■■■ 1 -NW0900-0302NA-■■■ 1 4■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■FW (White paint)63

NW Narrow Width Easy-Order Mobile Cabinet CombinationsNW600 Mobile Cabinets33 1 ⁄8" highNW750 Mobile Cabinets39 1 ⁄8" highNW600 Mobile WorkCenters33 3 ⁄4" high x 33 3 ⁄4" wideEach mobile cabinet comes with:DRAWER HT. DRAWER INTERIOR2" (75N) 1052" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 104DRAWER HT.2" (75N) 0182" (75N) 0183" (100N) 2125" (150N) 1045" (150N) 1047" (200N) 104DRAWER INTERIORDRAW.HT. INT.2" (75N) 2122" (75N) 1073" (100N) 1075" (150N) 1047" (200N) 104INCL. INT.5" (150N) 104450 DOOR• 2 fixed and 2 swivel casters withwheel locks• Handles• Individual drawer latches• 150 lb. load capacityPART NO.DRWS. COMPTS.NW0600-0601N-M-■■ 6 -NW0600-0601NA-M-■■ 6 42includes 4" x 1 1 ⁄4" castersPART NO.DRWS. COMPTS.NW0750-0601N-M-■■ 6 -NW0750-0601NA-M-■■ 6 60includes 4" x 1 1 ⁄4" castersBOTTOM SHELFPART NO.DRWS. COMPTS.MNW0600-0701-■■ 6 -MNW0600-0701A-■■ 6 38includes 4" x 2" castersHow to read the charts on thispageThe 2 columns to the right of each cabinetillustration indicate:• Drawer heights• Drawer interior sets (shown onpage 65)DRAWER HT. DRAWER INTERIOR2" (75N) 0182" (75N) 2123" (100N) 2125" (150N) 1047" (200N) 104DRAWER HT. DRAWER INTERIOR2" (75N) 2122" (75N) 2123" (100N) 2123" (100N) 1075" (150N) 1079" (250N) 104DRAW.HT. INT.3" (100N) 2123" (100N) 2125" (150N) 1079" (250N) 104INCLUDES600 DOORADJ. SHELFBOTTOM SHELFThe chart below the illustrationindicates:• Part numbers• Number of drawers• Number of drawer compartmentscreated by the interior sets (shownon page 65)How to order a Narrow WidthEasy-Order Mobile CabinetPART NO.DRWS. COMPTS.NW0600-0501N-M-■■ 5 -NW0600-0501NA-M-■■ 5 50includes 4" x 1 1 ⁄4" castersDRAWER HT. DRAWER INTERIOR3" (100N) 2125" (150N) 1045" (150N) 1047" (200N) 104PART NO.DRWS. COMPTS.NW0750-0602N-M-■■ 6 -NW0750-0602NA-M-■■ 6 54includes 4" x 1 1 ⁄4" castersDRAWER HT. DRAWER INTERIOR3" (100N) 2125" (150N) 1075" (150N) 1075" (150N) 1047" (200N) 104PART NO.DRWS. COMPTS.MNW0600-0601-■■ 4 -MNW0600-0601A-■■ 4 35includes 4" x 2" castersINCL.INT.5" (150N) 104450 DOORINCL. INT.5" (150N) 104450 DOOR1. Select Easy-Order CabinetCombi na tion either without or withdrawer interior sets (designated byan “A” near the end of the partnumber – i.e., NW0600-0601NA-M).PART NO.DRWS. COMPTS.NW0600-0402N-M-■■ 4 -NW0600-0402NA-M-■■ 4 24includes 4" x 1 1 ⁄4" castersPART NO.DRWS. COMPTS.NW0750-0503N-M-■■ 5 -NW0750-0503NA-M-■■ 5 34includes 4" x 1 1 ⁄4" castersBOTTOM SHELFBOTTOM SHELFPART NO.DRWS. COMPTS.MNW0600-0401-■■ 2 -MNW0600-0401A-■■ 2 8includes 4" x 2" casters2. ■ Select lock type.NL = noneRG = individualKA = keyed-alikeMA = masterFor additional lock options, see ourGeneral Storage Catalog.3. ■ Select paint color. For colorchart, see back cover.EXAMPLE: to order an NW0600-0501NA-M cabinet with an individuallock and Red paint, the part numberwould be NW0600-0501NA-M-RGNR (shown in photo at top of page).Mobile Cabinet OptionsFoldingShelvesShelf can be mounted on either the leftor right side of any mobile or stationarycabinet. 50 lb. maximum capacity. Shelfis 15" wide x 28 1 ⁄2" deep.PART NO.FS-36DX15-LFS-36DX15-RMOUNTS TOleft sideright sideNW Mobile Cabinet TopsFor top descriptions, see page 42.PART NO. DESCRIPTION HT.NW-RT retainer top with 3 ⁄4"ribbed mat2NW-RT* retainer top with 3 ⁄4"ribbed matNW1BCT butcher block 1 3 ⁄4"NW2BCT* butcher block 1 3 ⁄4"NW1PCT plastic laminate 1 9 ⁄16"NW2PCT* plastic laminate 1 9 ⁄16"*use with mobile work centersMesh Drawer LinerNon-slip polyester mesh liner protectsitems in drawers without drawer interiorsets from shifting or sliding.Protects drawer bottom from scratchesand dents. Liner is non-toxic, washableand treated to inhibit mold and mildew.PART NO.NWMDL64

NW Narrow Width Easy-Order Drawer Interior SetsNWHow to order a Narrow WidthEasy-Order Drawer Interior SetTo order the drawer interior sets shownon this page, use the part number inthe chart and add the drawer height inplace of the green box.For all drawer heightsPART NO. COMPTS. CMPT. WIDTHNWDR104-■ 2 5 1 ⁄ 2"2 6 1 ⁄4"For drawer heights 75 through 200PART NO. COMPTS. CMPT. WIDTHNWDR105-■ 3 4 1 ⁄8"2 7 1 ⁄ 2"For drawer heights 75 through 300PART NO. COMPTS. CMPT. WIDTHNWDR106-■ 3 6 1 ⁄4"3 5 1 ⁄ 2"EXAMPLE: to order an NWDR106drawer interior set for a 100 height (3")drawer, the part ordering numberwould be NWDR106-100.For drawer heights 75 through 200PART NO. COMPTS. CMPT. WIDTHNWDR107-■ 4 4 1 ⁄8"3 7 1 ⁄ 2"For all drawer heightsPART NO. COMPTS. CMPT. WIDTHNWDR108-■ 4 5 1 ⁄ 2"4 6 1 ⁄4"For drawer heights 75 through 200PART NO. COMPTS. CMPT. WIDTHNWDR209-■ 6 3 1 ⁄ 2"3 4 1 ⁄8"For drawer heights 75 through 200PART NO. COMPTS. CMPT. WIDTHNWDR212-■ 4 4 1 ⁄8"8 3 1 ⁄ 2"For drawer heights 75 through 100PART NO. COMPTS. CMPT. SIZENWDR008-■ 8 6" x 6"For drawer heights 75 through 100PART NO. COMPTS. CMPT. SIZENWDR012-■ 8 3" x 6"4 6" x 6"For drawer heights 75 through 100PART NO. COMPTS. CMPT. SIZENWDR016-■ 16 3" x 6"For drawer height 75PART NO. COMPTS. CMPT. SIZENWDR018-■ 2 6" x 6"8 3" x 6"8 3" x 3"For drawer height 75PART NO. COMPTS. CMPT. SIZENWDR024-■ 16 3" x 3"8 3" x 6"For drawer height 75PART NO. COMPTS. CMPT. SIZENWDR082-■ 16 3" x 3"24 3" x 2"For drawer height 75PART NO. COMPTS. CMPT. SIZENWDR083■ 32 2" x 3"24 2" x 2"Sliding accessory trayFor drawer heights 100 through 250PART NO. COMPTS. CMPT. WID.NWDR-AT06-■ 5 3"65

MP Width Cabinets – 22 3 ⁄16" wide x 28 1 ⁄2" deepMulti-purpose versatility andfunctionality• Perfect workbenchpedestals• Can be adapted to serveas mobile cabinetsWE OFFER A NUMBEROF PRE-CONFIGUREDEASY-ORDER COMBI-NATIONS• MP WIDTH CABI-NETS: PAGES 68-69• MP WIDTH MOBILECABINETS: PAGE 70Repair workbenches at TinkerAir Force Base feature MP Widthcabinet pedestals to providetechnicians with ample storagefor tools and parts needed toservice aircraft hydraulics andelectronics.66

➤MP Width Custom Cabinet OrderingMPFor detailed directions onordering custom cabinets andcomplete descriptions of theoptions on this page, pleasesee our General StorageCatalog.Select cabinet housingLista’s steel cabinet housings offerstrength and flexibility. Drawers,shelves and roll-out trays can beassembled in any sequence.MP Width Cabinet Housings22 3 ⁄16" wide x 28 1 ⁄2" deep(564mm x 725mm)PART NO. OVERALL HEIGHT(without base)MP300 15 3 ⁄4" (400mm)MP450 21 5 ⁄8" (550mm)MP600 27 1 ⁄ 2" (700mm)MP750 33 1 ⁄ 2" (850mm)MP900 39 3 ⁄8" (1000mm)MP1225 52 3 ⁄16" (1325mm)MP1350 57 1 ⁄8" (1450mm)MP Width Double Hinged DoorCabinet HousingsDouble hinged door housings are theonly door cabinets into which drawersand roll-out trays can be installed(shelves can also be installed in thesehousings). Includes individual lock (RG)and 2 keys.22 3 ⁄16" wide x 29 1 ⁄2" deep(564mm x 750mm)PART NO. OVERALL HEIGHT(without base)MPDHD600 27 1 ⁄ 2" (700mm)MPDHD750 33 1 ⁄ 2" (850mm)MPDHD900 39 3 ⁄8" (1000mm)MPDHD1225 52 3 ⁄16" (1325mm)MPDHD1350 57 1 ⁄8" (1450mm)2 Select lockCabinets come equipped with an individuallock (RG) and 2 keys. To selectother locking options, choose from thechart below or see our General StorageCatalog.PART NO.RGKAMANL*LOCK TYPEindividual lockkeyed alike lockmaster lockno lock wanted3 Select baseLista offers a wide array of cabinetbases to suit any need. For descriptions,see our General Storage Catalog.Fork Truck BasePART NO. HEIGHTMP-FTB 2 3 ⁄8" (60mm)Frame BasesPART NO. HEIGHT RAISE 600 CABS. TOMP-2 2" (50mm) desk heightMP-4 4" (100mm) low bench heightMP-6 6" (150mm) standard bench ht.Mobile BasesMobile bases include a set of 2 fixedand 2 swivel casters with wheel locks.Mobile bases not recommended for usewith 1225 height or higher cabinets.PART NO. CASTERS OAH CAP.Use with 1 MP housingCB-MP4B 4" x 2" 6 1 ⁄4" 1400 lb.CB-MP6B 6" x 2" 8 1 ⁄8" 2400 lb.Use with 2 MP housings on 1 pan baseMBP-MP/MP4ML 4"x 2" 6 1 ⁄4" 1400 lb.MBP-MP/MP6ML 6"x 2" 8 1 ⁄8" 2400 lb.4 Select topTop depth is 28 1 ⁄2". (For tops for29 1 ⁄2" deep housings with doors, contactyour Lista representative.) For topdescriptions, see pages 42 and 56.PART NO. DESCRIPTIONHT.MP-RT retainer top w/ribbed mat 3 ⁄4"MP1BCT butcher block 1 3 ⁄4"MP1PCT plastic laminate 1 9 ⁄16"MP1RCT phenolic resin 1"MP1LSCT galvanized steel over wood 1 13 ⁄16"MP1SSC stainless steel cabinet cover 1⁄16"5 Select drawersDrawers have 150 lb. (70kg) weightcapacity for evenly distributed loads.For MP Width cabinets with 440 lb.(200kg) weight capacity, see ourGeneral Storage Catalog.PART NO. USABLE HT. SIDEWALL HT.MP75N 2 3 ⁄8" (61mm) 2" (52mm)MP100N 3 3 ⁄8" (86mm) 3" (77mm)MP125N 4 3 ⁄8" (111mm) 3" (77mm)MP150N 5 1 ⁄4" (133mm) 5" (127mm)MP175N 6 1 ⁄4" (159mm) 5" (127mm)MP200N 7 1 ⁄4" (185mm) 7" (177mm)MP250N 9 1 ⁄4" (229mm) 8 15 ⁄16" (227mm)MP300N 11" (279mm) 10 15 ⁄16"(277mm)5 Select shelves, traysand doorsShelvesShelves allow storage of bulky items inclose proximity to high density drawerstorage.Adjustable ShelfPART NO. USABLE WIDTH USABLE DEPTHMP-AS 19 3 ⁄4" (502mm) 24 1 ⁄4" (616mm)Bottom ShelfPART NO. USABLE WIDTH USABLE DEPTHMP-BS 19 13 ⁄16"(503mm) 23 3 ⁄4" (604mm)Roll-Out TraysRoll-out trays allow easy access tostored items, even in the farthest corner.Trays have 150 lb. (70kg) weightcapacity for evenly distributed loads.PART NO. USABLE WIDTH USABLE DEPTHMP-TCN* 17 1 ⁄8" (435mm) 24" (609mm)*mounts behind MP flush door (see below)Flush Hinged DoorsDoors protect cabinet contents storedon shelves. Door with integrated handleis reversible in field to allow door toopen in opposite direction. To order,door opening orientation (“R” for rightor “L” for left) must be written in placeof the red box (■) in the part number.Only bottom and adjustable shelvesmay be installed behind flush doors.PART NO. HEIGHTFD300-27■* 11 13 ⁄16" (300mm)FD450-27■* 17 11 ⁄16" (450mm)FD600-27■* 23 5 ⁄8" (600mm)FD750-27■ 29 9 ⁄16" (750mm)FD900-27■ 35 7 ⁄16" (900mm)*limit: 1 adjustable shelf and 1 bottom shelf6 Select drawer partitionsand dividers• MP Width drawer interior sets, p. 71• Individual drawer partitioningaccessories, see our GeneralStorage Catalog7 Select colorsTo order cabinet housing and drawerfront paint colors, see the back cover.➤18"(459MM)*27 UNITS*INSIDE DIMENSIONSLista’s modular buildingblock system means that yourMP Width cabinets can be configuredto exactly suit yourrequirements.To configure your customcabinet, simply follow the stepsshown in the charts to the left.Total drawer and/or doormodel numbers must add up tothe model number of the housing.EXAMPLE: 900 housing•100 drawer100 drawer150 drawer150 drawer200 drawer200 drawerEXAMPLE: 900 housing with flushhinged door•150 drawer150 drawer600 flush door➤➤24"(610MM)*36 UNITSTotal drawer height= 900Total drawer and doorheight = 900*not available for double hinged doorcabinets67

MP Width Easy-Order Cabinet CombinationsMP300 Cabinets15 3 ⁄4" highMP600 Cabinets for Workbench Pedestals27 1 ⁄2" highHow to read the charts on thispageThe 2 columns to the right of each cabinetillustration indicate:• Drawer heights• Drawer interior sets (shown onpage 71)The chart below the illustration indicates:DRAWER HT.2" (75N) 3162" (75N) 3162" (75N) 2092" (75N) 209DRAWER INTERIORPART NO.DRWS. COMPTS.MP0300-0401N-■■■ 4 -MP0300-0401NA-■■■ 4 50DRAWER HT.2" (75N) 3162" (75N) 3162" (75N) 2092" (75N) 2093" (100N) 2093" (100N) 2093" (100N) 209DRAWER INTERIORPART NO.DRWS. COMPTS.MP0600-0701N-■■■ 7 -MP0600-0701NA-■■■ 7 77DRAWER HT.2" (75N) 3163" (100N) 2094" (125N) 10411" (300N) -DRAWER INTERIORPART NO.DRWS. COMPTS.MP0600-0401N-■■■ 4 -MP0600-0401NA-■■■ 4 29• Part numbers• Number of drawers• Number of drawer compartmentscreated by the interior sets (shownon page 71)How to order an MP WidthEasy-Order CabinetDRAWER HT.2" (75N) 3163" (100N) 2094" (125N) 209DRAWER INTERIORDRAWER HT.2" (75N) 0282" (75N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 104DRAWER INTERIORDRAWER HT.3" (100N) 3165" (150N) 2095" (150N) 1047" (200N) 104DRAWER INTERIOR1. Select Easy-Order Cabinet Combi -na tion either without or with drawerinterior sets (designated by an “A”at the end of the part number – i.e.,MP0750-0302NA).PART NO.DRWS. COMPTS.MP0300-0301N-■■■ 3 -MP0300-0301NA-■■■ 3 34PART NO.DRWS. COMPTS.MP0600-0601N-■■■ 6 -MP0600-0601NA-■■■ 6 82PART NO.DRWS. COMPTS.MP0600-0402N-■■■ 4 -MP0600-0402NA-■■■ 4 332. ■ Select base type.NB = noneFT = fork truckF2 = 2" frame baseF4 = 4" frame baseF6 = 6" frame baseFor additional bases, see page 67;for Easy-Order mobile combinations,see page 70.DRAWER HT.3" (100N) 2097" (200N) 104DRAWER INTERIORDRAWER HT.2" (75N) 3162" (75N) 3163" (100N) 2095" (150N) 1047" (200N) 104DRAWER INTERIORDRAWER HT.5" (150N) 2097" (200N) 1049" (250N) 104DRAWER INTERIOR3. ■ Select lock type.NL = noneRG = individualKA = keyed-alikeMA = masterFor additional lock options, see ourGeneral Storage Catalog.PART NO.DRWS. COMPTS.MP0300-0201N-■■■ 2 -MP0300-0201NA-■■■ 2 13PART NO.DRWS. COMPTS.MP0600-0501N-■■■ 5 -MP0600-0501NA-■■■ 5 49PART NO.DRWS. COMPTS.MP0600-0302N-■■■ 3 -MP0600-0302NA-■■■ 3 174. ■ Select paint color. For colorchart, see the back cover or below.EXAMPLE: to order an MP0750-0302NA cabinet with a fork truck base,an individual lock and Light Gray paint,the part number would beMP0750-0302NA-FTRGLG(shown in photo at top of page).DRAWER HT.5" (150N) 2095" (150N) 104DRAWER INTERIORPART NO.DRWS. COMPTS.MP0300-0202N-■■■ 2 -MP0300-0202NA-■■■ 2 13DRAWER HT.3" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 1045" (150N) 104DRAWER INTERIORPART NO.DRWS. COMPTS.MP0600-0502N-■■■ 5 -MP0600-0502NA-■■■ 5 42DRAWER HT.5" (150N) 104450 DOORBOTTOM SHELFDRAWER INTERIORPART NO.DRWS. COMPTS.MP0600-0202N-■■■ 1 -MP0600-0202NA-■■■ 1 468■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

22 3 ⁄16" wide x 28 1 ⁄2" deep MPMP750 Cabinets for Workbench Pedestals33 1 ⁄2" highMP900 Cabinets39 3 ⁄8" highDRAWER HT.2" (75N) 5102" (75N) 5102" (75N) 3162" (75N) 3163" (100N) 2093" (100N) 2099" (250N) 104DRAWER INTERIORDRAWER HT.3" (100N) 3163" (100N) 2095" (150N) 2095" (150N) 1049" (250N) 104DRAWER INTERIORDRAWER HT.2" (75N) 5102" (75N) 5102" (75N) 3162" (75N) 3163" (100N) 2093" (100N) 2093" (100N) 2095" (150N) 1045" (150N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR5" (150N) 2095" (150N) 1045" (150N) 1047" (200N) 1049" (250N) 104PART NO.DRWS. COMPTS.MP0750-0702N-■■■ 7 -MP0750-0702NA-■■■ 7 74PART NO.DRWS. COMPTS.MP0750-0502N-■■■ 5 -MP0750-0502NA-■■■ 5 42PART NO.DRWS. COMPTS.MP0900-0901N-■■■ 9 -MP0900-0901NA-■■■ 9 87PART NO.DRWS. COMPTS.MP0900-0501N-■■■ 5 -MP0900-0501NA-■■■ 5 25DRAWER HT.2" (75N) 0282" (75N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 2095" (150N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR5" (150N) 2095" (150N) 1047" (200N) 1049" (250N) 104DRAWER HT.2" (75N) 3162" (75N) 3163" (100N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 1047" (200N) 104DRAWER INTERIORDRAWER HT.3" (100N) 3165" (150N) 2095" (150N) 2097" (200N) 10411" (300N) -DRAWER INTERIORPART NO.DRWS. COMPTS.MP0750-0703N-■■■ 7 -MP0750-0703NA-■■■ 7 91PART NO.DRWS. COMPTS.MP0750-0401N-■■■ 4 -MP0750-0401NA-■■■ 4 21PART NO.DRWS. COMPTS.MP0900-0801N-■■■ 8 -MP0900-0801NA-■■■ 8 90PART NO.DRWS. COMPTS.MP0900-0502N-■■■ 5 -MP0900-0502NA-■■■ 5 38DRAWER HT.2" (75N) 0282" (75N) 3163" (100N) 2095" (150N) 209DRAWER INTERIORDRAWER HT.3" (100N) 3165" (150N) 2097" (200N) 104DRAWER INTERIORDRAWER HT.2" (75N) 0282" (75N) 3163" (100N) 3165" (150N) 2095" (150N) 209DRAWER INTERIORDRAWER HT.3" (100N) 2097" (200N) 104600 DOORDRAWER INTERIOR5" (150N) 1047" (200N) 10411" (300N) -5" (150N) 1047" (200N) 104ADJUSTABLE SHELFBOTTOM SHELFPART NO.DRWS. COMPTS.MP0750-0601N-■■■ 6 -MP0750-0601NA-■■■ 6 70PART NO.DRWS. COMPTS.MP0750-0402N-■■■ 4 -MP0750-0402NA-■■■ 4 29PART NO.DRWS. COMPTS.MP0900-0701N-■■■ 7 -MP0900-0701NA-■■■ 7 86PART NO.DRWS. COMPTS.MP0900-0402N-■■■ 2 -MP0900-0402NA-■■■ 2 13DRAWER HT.2" (75N) 3162" (75N) 3163" (100N) 2093" (100N) 2095" (150N) 1049" (250N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR5" (150N) 104600 DOORADJUSTABLE SHELFDRAWER HT.3" (100N) 3163" (100N) 2095" (150N) 2095" (150N) 1045" (150N) 1049" (250N) 104DRAWER INTERIORDRAWER HT. DRAWER INTERIOR5" (150N) 104750 DOORADJUSTABLE SHELFBOTTOM SHELFBOTTOM SHELFPART NO.DRWS. COMPTS.MP0750-0602N-■■■ 6 -MP0750-0602NA-■■■ 6 58PART NO.DRWS. COMPTS.MP0750-0302N-■■■ 1 -MP0750-0302NA-■■■ 1 4PART NO.DRWS. COMPTS.MP0900-0601N-■■■ 6 -MP0900-0601NA-■■■ 6 46PART NO.DRWS. COMPTS.MP0900-0302N-■■■ 1 -MP0900-0302NA-■■■ 1 4■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■FW (White paint)69

MP Width Easy-Order Mobile Cabinet CombinationsMP300 Mobile Carts32 1 ⁄2" highMP600 Mobile Cabinets35 1 ⁄2" highMP600 Mobile WorkCenters35 1 ⁄2" highEach mobile cabinet comes with:DRAWER HT. DRAWER INTERIOR2" (75N) 0282" (75N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 104DRAW.HT. IN.2" (75N) 3162" (75N) 3163" (100N) 2095" (150N) 1047" (200N) 104INCLUDES600 DOORADJ. SHELF• 2 fixed and 2 swivel casters withwheel locks• Tubular steel handles• Individual drawer latches• 150 lb. load capacityHow to read the charts on thispagePART NO.DRWS. COMPTS.MSC-■ - -includes 4" x 1 1 ⁄4" castersincludes 4-sided retainer top with ribbed matPART NO.DRWS. COMPTS.MP0600-0601N-M-■■ 6 -MP0600-0601NA-M-■■ 6 82includes 6" x 2" castersBOTTOMSHELFPART NO.DRWS. COMPTS.MMP0600-0702-■■ 5 -MMP0600-0702A-■■ 5 49includes 6" x 2" casters44 3 ⁄8" wideThe 2 columns to the right of eachcabinet illustration indicate:• Drawer heights• Drawer interior sets (shown onpage 71)DRAWER HT. DRAWER INTERIOR2" (75N) 3163" (100N) 2094" (125N) 209DRAWER HT. DRAWER INTERIOR2" (75N) 3162" (75N) 3163" (100N) 2095" (150N) 1047" (200N) 104DRAW.HT. IN.5" (150N) 104450 DOORBOTTOMSHELFDRAW.HT. IN.5" (150N) 104450 DOORBOTTOMSHELFThe chart below the illustrationindicates:• Part numbers• Number of drawers• Number of drawer compartmentscreated by the interior sets (shownon page 71)How to order an MP WidthEasy-Order Mobile CabinetPART NO.DRWS. COMPTS.MCMP0300-0301N-■■ 3 -MCMP0300-0301NA-■■ 3 34includes 4" x 1 1 ⁄4" castersincludes 4-sided retainer top with ribbed matDRAWER HT. DRAWER INTERIOR3" (100N) 2097" (200N) 104PART NO.DRWS. COMPTS.MP0600-0501N-M-■■ 5 -MP0600-0501NA-M-■■ 5 49includes 6" x 2" castersDRAWER HT. DRAWER INTERIOR3" (100N) 3165" (150N) 2095" (150N) 1047" (200N) 104PART NO.DRWS. COMPTS.MMP0600-0402-■■ 2 -MMP0600-0402A-■■ 2 8includes 6" x 2" casters44 3 ⁄8" wideDRAW.HT. IN.2" (75N) 5102" (75N) 0183" (100N) 3165" (150N) 2097" (200N) 104INCLUDES600 DOORADJ. SHELF701. Select Easy-Order CabinetCombi na tion either without or withdrawer interior sets (designated byan “A” near the end of the partnumber – i.e., MP0600-0402NA-M).2. ■ Select lock type.NL = noneRG = individualKA = keyed-alikeMA = masterFor additional lock options, see ourGeneral Storage Catalog.3. ■ Select paint color. For colorchart, see back cover.EXAMPLE: to order an MP0600-0501NA-M cabinet with an individuallock, Bright Blue paint and a retainertop, the part number would beMP0600-0501NA-M-RGBB, with anMP-RT top (shown in photo at top ofpage).PART NO.DRWS. COMPTS.MCMP0300-0201N-■■ 2 -MCMP0300-0201NA-■■ 2 13includes 4" x 1 1 ⁄4" castersincludes 4-sided retainer top with ribbed matMobile Cabinet OptionsFolding ShelvesShelf can be mounted on either the leftor right side of any mobile or stationarycabinet. 50 lb. maximum capacity. Shelfis 15" wide x 28 1 ⁄2" deep. Not for usewith mobile carts.PART NO.FS-36DX15-LFS-36DX15-RMOUNTS TOleft sideright sidePART NO.DRWS. COMPTS.MP0600-0402N-M-■■ 4 -MP0600-0402NA-M-■■ 4 33includes 6" x 2" castersMP Mobile Cabinet TopsFor top descriptions, see page 42.PART NO. DESCRIPTION HT.MP-RT retainer top with 3 ⁄4"ribbed mat2MP-RT* retainer top with 3⁄4"ribbed matMP1BCT butcher block 1 3 ⁄4"MP2BCT* butcher block 1 3 ⁄4"MP1PCT plastic laminate 1 9 ⁄16"MP2PCT* plastic laminate 1 9 ⁄16"*use with 2 MP housingsBOTTOMSHELFPART NO.DRWS. COMPTS.MMPNW0600-0703-■■ 5 -MMPNW0600-0703A-■■ 5 57includes 6" x 2" casters39" wide (MP width drawers, NW width door)Mesh Drawer LinerNon-slip polyester mesh liner protectsitems in drawers without drawer interiorsets from shifting or sliding.Protects drawer bottom from scratchesand dents. Liner is non-toxic, washableand treated to inhibit mold and mildew.PART NO.MPMDL

MP Width Easy-Order Drawer Interior SetsMPHow to order an MP WidthEasy-Order Drawer Interior SetTo order the drawer interior sets shownon this page, use the part number inthe chart and add the drawer height inplace of the green box.For all drawer heightsPART NO. COMPTS. CMPT. WIDTHMPDR104-■ 2 7 1 ⁄ 2"2 9 1 ⁄4"For all drawer heightsPART NO. COMPTS. CMPT. WIDTHMPDR206-■ 6 5 1 ⁄ 2"For all drawer heightsPART NO. COMPTS. CMPT. WIDTHMPDR209-■ 9 5 1 ⁄ 2"EXAMPLE: to order an MPDR206drawer interior set for a 100 height (3")drawer, the part ordering numberwould be MPDR206-100.For drawer heights 75 through 150PART NO. COMPTS. CMPT. WIDTHMPDR312-■ 3 3 1 ⁄ 2"9 4 1 ⁄ 8"For drawer heights 75 through 150PART NO. COMPTS. CMPT. WIDTHMPDR316-■ 4 3 1 ⁄ 2"12 4 1 ⁄ 8"For drawer heights 75 through 125PART NO. COMPTS. CMPT. WIDTHMPDR430-■ 18 2 5 ⁄ 8"12 3 1 ⁄ 2"For drawer heights 75 through 150PART NO. COMPTS. CMPT. DEPTHMPDR510-■ 3 3 1 ⁄ 2"4 15 5 ⁄ 8"For drawer heights 75 through 125PART NO. COMPTS. CMPT. WIDTHMPDR524-■ 12 2 1 ⁄ 8"12 2 5 ⁄ 8"For drawer heights 75 through 125PART NO. COMPTS. CMPT. SIZEMPDR012-■ 12 6" x 6"For drawer heights 75 through 125PART NO. COMPTS. CMPT. SIZEMPDR018-■ 12 3" x 6"6 6" x 6"For drawer heights 75 and 100PART NO. COMPTS. CMPT. SIZEMPDR024-■ 24 3" x 6"For drawer height 75PART NO. COMPTS. CMPT. SIZEMPDR028-■ 16 3" x 3"8 3" x 6"4 6" x 6"For drawer height 75PART NO. COMPTS. CMPT. WIDTHMPDR480-■ 24 1 1 ⁄4"16 1 3 ⁄4"For drawer height 75PART NO. COMPTS. CMPT. WIDTHMPDR482-■ 23 1 3 ⁄4"14 2 3 ⁄4"Sliding accessory trayFor drawer heights 100 through 300PART NO. COMPTS. CMPT. WIDTHMPDR-AT10-■ 1 6"8 3"71

Lista Nexus SystemBy equipping its workbencheswith the Nexus AccessorySystem, Landmark Aviation tookits productivity to stratosphericlevels. The ability to have suchaccessories as pegboard panels,markerboards, overhead cabinetsand electrical outlets within easyreach has improved both ergo -nomic comfort and efficiency.

HIGHLY FLEXIBLE, FULLY MODULAR SYSTEM FORPRODUCTIVE WORKSPACELista Nexus SystemNexus System Features 74Nexus System Frames 76Nexus System Accessories 77Nexus System Shelves 77Nexus System Lighting Accessories 78Nexus System Tool Rails, Power Options 79Nexus System Plastic Box Rails, Back Stops 80Nexus System Overhead Cabinets 81Nexus System Pivoting Accessories 82Nexus System Back Panels, Markerboard/Tackboards 83Nexus System Easy-Order Combinations 84Nexus System Packing Benches 86Nexus System Packing Bench Features 87Nexus System Packing Bench Legs and Accessories 88Nexus System Packing Bench Easy-Order Combinations 90Nexus System Stands and Trolleys 92Nexus System Stand and Trolley Accessories 93Nexus System Stand and Trolley Easy-Order Combinations 94Nexus System Flow Racks 96Nexus System Flow Rack Accessories 97Nexus System Flow Rack Easy-Order Combinations 9773

Nexus System FeaturesLista’s Nexus System is aNexus System benefits include:Workstations equipped tohighly functional and flexiblesystem of above-work surfaceaccessories and modular components.It has been designedGreater productivity andefficiencyExtensive selection of heights andwidths, allowing you to configureexactly suit your needsThe wide choice of accessoriesmeans that whatever the task, anappropriate accessory is available.to cost-effectively meet theneeds of a broad variety of jobs.The system has been ergo -nomically designed, deliveringeasy accessibility with no stretchor strain, reducing the risk ofinjury and increasing productivity.Like all Lista systems, theNexus System is modular andyour workspace to fit your needs.Reduced strain, increasedergonomic ease• Accessories can be chosen andpositioned to best suit each userfor ultimate ergonomic adapt -ability.• Many accessories can tilt andpivot in a number of positions,easily adjusting to the mostProperly illuminated work areaLight fixtures can be easily positionedat the desired height, depthand angle.Maximum available worksurfaceArticulating arms mount to Nexusuprights, leaving full surface availablefor task.Overhead light fixtureTool railallows for easy reconfiguration.comfortable and useful position.It can easily be adapted orexpanded to meet changingReversible markerboard/tackboardneeds. It can also be retrofittedLouvered panelto any existing workbench,whether it’s from Lista oranother manufacturer. ManyNexus components can be easilyadjusted for specific taskswithin a workshift. Systemwidth is limited only by yourworksurface length.All components are availableNexus System accessories arenot compatible with Arlink ®8000 or VSI uprights. Foraccessories for those systems,see pages 22-28.Adjustable shelfMonitor shelfHorizontal power railBack stopAccessory shelfin ESD paint for static-sensitiveapplications.Nexus System accessoriescan also be used with our otherNexus System products:• Packing benches (page 86)• Stationary stands (page 92)• Mobile trolleys (page 92)• Flow racks (page 96)TO ORDER AN EASY-ORDERCOMBINATION (PRECON-FIGURED NEXUS SYSTEMACCESSORIES), SEE PAGES84-85.74

Lista’s advanced Nexus Systemenables the user to customizethe workspace for the greatestproductivity and ergonomiccomfort. Accessories can be easilyadded and moved to providecomplete flexibility and easeof use.75

➤➤Nexus System FramesBuilding your ideal NexusSTARTER SECTION WIDTH➤ADDER SECTION WIDTH➤accessory system is an easyprocess. Simply select theframes (starters and adders)that fit your worksurface width,then pick accessories of correspondingwidths to mount onthe frames. Accessories areeasily moved and repositionedas your needs change.STARTER SECTION FRAMEADDER SECTION FRAMEAvailable Widths of Nexus SystemsThe widths below represent measurements from frame center to frame center.Uprights are 1 3 ⁄16" wide.Using 1 SectionSECTION WIDTH OVERALL WIDTH MINIMUM WORK- INSIDE USEABLE(CENTER-TO-CENTER) (FOOT-TO-FOOT) SURFACE LENGTH WIDTH24" 26 3 ⁄4" 30" 22 3 ⁄4"30" 32 3 ⁄4" 36" 28 3 ⁄4"36" 38 3 ⁄4" 42" 34 3 ⁄4"42" 44 3 ⁄4" 48" 40 3 ⁄4"48" 50 3 ⁄4" 54" 46 3 ⁄4"60" 62 3 ⁄4" 66" 58 3 ⁄4"Using 1 Starter and 1 Adder SectionSECTION WIDTH OVERALL WIDTH MINIMUM WORKSURFACE LENGTH(CENTER-TO-CENTER) (FOOT-TO-FOOT)24" + 24" 50 3 ⁄4" 54"24" + 30" 56 3 ⁄4" 60"24" + 36" 62 3 ⁄4" 66"24" + 42" 68 3 ⁄4" 72"24" + 48" 74 3 ⁄4" 78"24" + 60" 86 3 ⁄4" 90"30" + 30" 62 3 ⁄4" 66"30" + 36" 68 3 ⁄4" 72"30" + 42" 74 3 ⁄4" 78"30" + 48" 80 3 ⁄4" 84"30" + 60" 92 3 ⁄4" 96"36" + 36" 74 3 ⁄4" 78"36" + 42" 80 3 ⁄4" 84"36" + 48" 86 3 ⁄4" 90"36" + 60" 98 3 ⁄4" 102"42" + 42" 86 3 ⁄4" 90"42" + 48" 92 3 ⁄4" 96"42" + 60" 104 3 ⁄4" 108"48" + 48" 98 3 ⁄4" 102"48" + 60" 110 3 ⁄4" 114"60" + 60" 122 3 ⁄4" 126"Nexus Surface-MountFramesFrames are sturdy, heavy gauge steel,and are notched front and back at 1"increments for mounting accessories.Starter frames consist of 2 uprightposts and a horizontal rail. Adder setsconsist of an additional upright andhorizontal rail. Uprights are available inheights of 30" and 48", and 6 widths.Foot plate is 2 3 ⁄4" x 4". Specify colorfrom chart on back cover.30" High Surface-Mount FramesPART NO. SEC. WIDTH CENT.-TO-CENT.Starter setNXF/SM2430 24"NXF/SM3030 30"NXF/SM3630 36"NXF/SM4230 42"NXF/SM4830 48"NXF/SM6030 60"Adder setNXF/SM2430A 24"NXF/SM3030A 30"NXF/SM3630A 36"NXF/SM4230A 42"NXF/SM4830A 48"NXF/SM6030A 60"48" High Surface-Mount FramesPART NO. SEC. WIDTH CENT.-TO-CENT.Starter setNXF/SM2448 24"NXF/SM3048 30"NXF/SM3648 36"NXF/SM4248 42"NXF/SM4848 48"NXF/SM6048 60"Adder setNXF/SM2448A 24"NXF/SM3048A 30"NXF/SM3648A 36"NXF/SM4248A 42"NXF/SM4848A 48"NXF/SM6048A 60"For rear-mount Nexus systemsfor Align ® Adjustable HeightWorkstations, see page 37.76

Nexus System ShelvesShelves must match thewidth of your chosen sectionframe (see page 76).Specify color from chart onAdjustable ShelvesAdjustable, heavy gauge steel shelvescan be mounted parallel to the worksurfaceor at a 15° angle for easy,ergonomic access. They have a 100 lb.weight capacity for evenly distributedloads. Shelves are reversible, with thelip either at the front, or at the rear toact as a back stop. Supports areattached through a simple doublenotchsystem into slots on the uprights.PART NO. SHELF WIDTH SEC. WIDTH12" deepNXS/A2412L 23 1 ⁄2" 24"NXS/A3012L 29 1 ⁄2" 30"NXS/A3612L 35 1 ⁄2" 36"NXS/A4212L 41 1 ⁄2" 42"NXS/A4812L 47 1 ⁄2" 48"NXS/A6012L 59 1 ⁄2" 60"15" deepNXS/A2415L 23 1 ⁄2" 24"NXS/A3015L 29 1 ⁄2" 30"NXS/A3615L 35 1 ⁄2" 36"NXS/A4215L 41 1 ⁄2" 42"NXS/A4815L 47 1 ⁄2" 48"NXS/A6015L 59 1 ⁄2" 60"Shelf DividersSteel dividers fit over the edge ofadjustable shelf when shelf is mountedat 0°. Base of divider can be either toleft or right of divider upright. Paintedto match shelf.PART NO.HEIGHTFor 12" deep adjustable shelvesNXS/MD100-12/L 4"NXS/MD100-12/R 4"NXS/MD150-12/L 6"NXS/MD150-12/R 6"NXS/MD200-12/L 8"NXS/MD200-12/R 8"For 15" deep adjustable shelvesNXS/MD100-15/L 4"NXS/MD100-15/R 4"NXS/MD150-15/L 6"NXS/MD150-15/R 6"NXS/MD200-15/L 8"NXS/MD200-15/R 8"Variable Angle ShelvesShelf adjusts from totally flat to a 25°angle and has a capacity of 150 lbs. forevenly distributed loads. Can bemounted in a forward or set-back positionbetween uprights for maximumflexibility.PART NO. SHELF WIDTH SEC. WIDTH18" deepNXS/V2418L 22 1 ⁄2" 24"NXS/V3018L 28 1 ⁄2" 30"NXS/V3618L 34 1 ⁄2" 36"NXS/V4218L 40 1 ⁄2" 42"NXS/V4818L 46 1 ⁄2" 48"NXS/V6018L 58 1 ⁄2" 60"24" deepNXS/V2424L 22 1 ⁄2" 24"NXS/V3024L 28 1 ⁄2" 30"NXS/V3624L 34 1 ⁄2" 36"NXS/V4224L 40 1 ⁄2" 42"NXS/V4824L 46 1 ⁄2" 48"back cover.77

Nexus System Lighting AccessoriesOverhead Light Fixtures• Fluorescent fixture is available in2-bulb or 4-bulb model in 44" or56" length.• Tilts up or down 10°.• Brackets allow light fixture to bemounted to frame sections 30" to90" wide.• Kit includes switch and 8' groundedelectrical cord, support track, standardacrylic diffuser and T8 bulbs.Requires NX/OHL-TR/BRK supportbrackets (see right).• Fixture available in Light Gray only,but brackets can be ordered in anyLista color (see back cover for colorchart).• Bracket with fixture can also simultaneouslysupport tool rail (seepage 79).Overhead Light Fixture KitsPART NO. FIXTURE SECTIONWIDTH WIDTH2-bulbNX/OHL-R48/2 44" 30"-48"NX/OHL-R60/2 56" 49"-60"NX/OHL-R72/2 56" 61"-72"NX/OHL-R78/2 56" 73"-78"NX/OHL-R84/2 56" 79"-84"NX/OHL-R90/2 56" 85"-90"4-bulbNX/OHL-R48/4 44" 30"-48"NX/OHL-R60/4 56" 49"-60"NX/OHL-R72/4 56" 61"-72"NX/OHL-R78/4 56" 73"-78"NX/OHL-R84/4 56" 79"-84"NX/OHL-R90/4 56" 85"-90"Overhead Light Fixtures OnlyPART NO. BULBS WIDTHNX/OHL44/2 2 44"NX/OHL44/4 4 44"NX/OHL56/2 2 56"NX/OHL56/4 4 56"Overhead Light and ToolRail Support BracketsRequired for mounting overhead lightfixture. Brackets come in pairs. Specifycolor (see back cover for color chart).• 24" deep brackets can be used witha 24" deep worksurface (either surface-or rear-mount* Nexus frames),or a 30" deep worksurface withsurface-mount frames.• 30" deep brackets can be used witha 30" deep worksurface with rearmountframes, or a 36" deep worksurface(either surface- or rearmountframes).*rear-mount frames only available withAlign ® adjustable height basesPART NO.BRACKET DEPTHNX/OHL-TR/BRK24 24"NX/OHL-TR/BRK30 30"Parabolic Diffusers forLight FixtureOptional chrome-plated plastic parabolicgrid directs light onto worksurfacewhile eliminating glare on adjacentworkstations.PART NO.NX/OHL-PD44NX/OHL-PD56USE WITH44" light fixture56" light fixtureUndershelf Task LightsAttach by magnet under shelves oroverhead cabinets. Includes whiteacrylic wrap-around diffuser, switch,6' cord and bulb.PART NO. SIZE BULBFLF-18 18" W x 5"D x 1 3 ⁄4"H F15T8FLF-36/UCF 36" W x 5"D x 1 3 ⁄4"H F25T8FLF-48/UCF 48" W x 5"D x 1 3 ⁄4"H F32T878

Nexus System Tool Rails and Power OptionsTool RailsThe tool rail spans the length of thework surface. It is available in 48", 60"or 72" lengths. Each tool rail has a 30lb. capacity, and comes complete witha trolley, 2 hangers, 2 endstops and 2end caps in black finish. Balancer notincluded. Requires support brackets(see right). Fixture and bracket canalso simultaneously support overheadlight (see page 78). Color is black.PART NO. LENGTHTR48 48"TR60 60"TR72 72"Tool Rail and OverheadLight Support BracketsRequired for mounting tool rail. Comesin pairs.PART NO.DEPTHNX/OHL-TR/BRK24 24"NX/OHL-TR/BRK30 30"Single UprightsEconomical solution tomounting power or articulatingcomponent abovethe worksurface. Capacity60 lbs.PART NO. HEIGHTNXF-P30/SM 30"NXF-P48/SM 48"Vertical PowerStripsMounts vertically to frontand back of upright.Bracket and hardware supplied.Lighted on/off switch,6' cord with grounded plugand circuit breaker areincluded. Fixture and bracketsare black.PART NO.NXVPS/15NXVPS/20NXVPS/15GFNXVPS/20GFDESCRIPTION15 amp with 6 outlets20 amp with 6 outlets15 amp GFCI with 6 outlets20 amp GFCI with 6 outletsHorizontal Power RailsSelf-contained, 6-plug electrical outletstrip. Power rail pivots on axis, providingfull horizontal adjustability. 110V,15 amp or 20 amp circuit breaker.For items with choice of color,specify color from chart on backcover.Swing Arm Tool RailThe swing arm tool rail is 36" in lengthand swings 180°. It has a 30 lb. capa -city and includes a trolley, 1 endstopand 1 end cap. Includes mountingbracket. Balancer not included. Coloris black.PART NO. LENGTHSWT36 36"AirhoseAttachmentSmall bracket attachesto frame upright.Quick-connect fittingnot supplied.PART NO.NX/AHBDESCRIPTIONbracket for air supplyPART NO.15 amp 20 ampNXHPS/24-15 NXHPS/24-20NXHPS/30-15 NXHPS/30-20NXHPS/36-15 NXHPS/36-20NXHPS/42-15 NXHPS/42-20NXHPS/48-15 NXHPS/48-20NXHPS/60-15 NXHPS/60-2015 amp GFCI 20 amp GFCINXHPS/24-15GF NXHPS/24-20GFNXHPS/30-15GF NXHPS/30-20GFNXHPS/36-15GF NXHPS/36-20GFNXHPS/42-15GF NXHPS/42-20GFNXHPS/48-15GF NXHPS/48-20GFNXHPS/60-15GF NXHPS/60-20GF79

Nexus System Plastic Box Rails and Back StopsPlastic box rails and backstops must match the width ofyour chosen section frame (seepage 76).Specify color from chart onback cover.Plastic Box RailsThe plastic box rail is easily adjustablefor ergonomic access. It can be mountedparallel to the worksurface or at a 15°angle. The rail is attached via a simpledouble-notch system. It can holdselected Lista or other boxes that havehanger lips at the rear for attaching toa louvered panel. Plastic boxes notincluded.PART NO. WIDTH MAXIMUM # OF3" BOXES/RAILNXBR/24 24" 7NXBR/30 30" 9NXBR/36 36" 11NXBR/42 42" 13NXBR/48 48" 15NXBR/60 60" 19Back StopsPrevents items from rolling off worksurface.3" in height. Painted to matchframe.PART NO. USE WITH SECTION WIDTHNXBS/24 24"NXBS/30 30"NXBS/36 36"NXBS/42 42"NXBS/48 48"NXBS/60 60"Plastic BoxesMade of high impact polystyrene (HIPS)red plastic, these boxes are for storingsmall parts. Boxes slip in and out ofplastic box rails for easy loading anddispensing and have label holderattachments.PART NO. W X D X HPB-5 3" x 3" x 2"PB-6 3" x 6" x 2"PB-7 6" x 6" x 2"PB-8 3" x 6" x 3"PB-9 6" x 6" x 3"PB-8D divider for PB-880

Nexus System Overhead CabinetsFor descriptions of overhead cabinets,see our General Storage Catalog.Overhead cabinet width must matchNexus frame section width. Mountingbrackets must be ordered separately.How to order a Nexusoverhead cabinetOverhead CabinetsOverhead Cabinet NexusMounting BracketsBrackets must be ordered for eachoverhead cabinet used. Comes inpairs.PART NO.NX/OHC-BRK16NX/OHC-BRK29FOR USE WITH16" high cabinet29" high cabinetLista overhead cabinets canattach to a Nexus frame forprotected, secure above-work -surface storage of large, bulkyitems.1. Select overhead cabinet basedon your choice of dimensions.2. ■ Select door type.ND = no doorDoor for 16" high overheadcabinetsRD = retractable doorDoors for 29" high overheadcabinetsHD = hinged doorsHDP* = hinged doors withsteel-framed plexiglasSD = sliding doorsSDP** = sliding doors withsteel-framed plexiglas16" high x 15" deepAvailable either with retractable dooror no door.PART NO.WIDTHOHC2416-■■■ 24"OHC3016-■■■ 30"OHC3616-■■■ 36"OHC4216-■■■ 42"OHC4816-■■■ 48"OHC6016-■■■ 60"Overhead CabinetAdditional Shelves(for 29" High Cabinets)13 1 ⁄2" deepPART NO.OHC-S24OHC-S30OHC-S36OHC-S42OHC-S48FOR USE WITH24" wide cabinet30" wide cabinet36" wide cabinet42" wide cabinet48" wide cabinet*plexiglas doors available forcabinets 30" and wider only**plexiglas doors available forcabinets 42" and wider only3. ■ Select lock type.RG = individualKA = keyed-alikeMA = master4. ■ Select paint color (see backcover for color chart).5. Order mounting brackets.EXAMPLE: to order an OHC2416overhead cabinet with a retractabledoor, an individual lock, and BrightBlue paint, the cabinet part numberwould be OHC2416-RDRGBB,and the mounting brackets wouldbe NX/OHC-BRK16.29" high x 15" deepAvailable either with hinged doors(with or without plexiglas window),sliding doors (with or without plexiglaswindow) or no door.PART NO.WIDTHOHC2429-■■■ 24"OHC3029-■■■ 30"OHC3629-■■■ 36"OHC4229-■■■ 42"OHC4829-■■■ 48"81

Nexus System Pivoting AccessoriesArticulating arms allow freeand simple repositioning of awide range of Nexus Systemaccessories. Arm swings 180°for easy ergonomic access, andhas a 75 lb. capacity. All accessoriesinclude arm and mountingbracket.Specify color from chart onback cover.Monitor Shelf withKeyboard HolderHolds computer monitor. Includesretractable wire keyboard holder. 75 lb.capacity. 12 3 ⁄8" wide x 12 3 ⁄8" deep.PART NO.NXA/MS-KBEquipment ShelfHolds a variety of customer-suppliedequipment or tools. 75 lb. capacity.12 3 ⁄8" wide x 12 3 ⁄8" deep.PART NO.NXA/ESAccessory ShelfFor easy access to small tools, instruments,parts, etc. Ribbed mat optional.21 1 ⁄4" wide x 7 3 ⁄8" deep. 75 lb.capacity.PART NO.NXA/ASNX/AS-MATDESCRIPTIONshelfribbed rubber matDocument HolderFor displaying papers, plans, etc.11 7 ⁄8" wide x 13 3 ⁄4" high. Includes lipfor pencils, pens, etc.PART NO.NXA/DHLarge Document HolderFor displaying large documents, andopen binders and books. 23 5 ⁄8" wide x13 3 ⁄4" high. Includes lip for pencils,pens, etc.Optional Mouse TrayMouse tray attaches to monitor shelfwith keyboard holder (above) to holdcomputer mouse and/or mouse pad.75 lb. capacity. 9 1 ⁄2" wide x 7 5 ⁄8"deep. Ordered separately.PART NO.NXA/DHWPART NO.NX/MPFlat Panel Monitor ArmFor attaching flat panel monitor toNexus upright. Accepts both 75mm and100mm square monitor hole patterns.17 1 ⁄2 lb. capacity. Includes bracket.PART NO.NXA/FPMAFlat PanelMonitorBracketGalvanized steel flatbracket for mountingthird party flat panelmonitor arms toNexus upright.Bin ContainerHolds 3 rows of plastic bins for easyaccess to parts and components.Interior space per shelf is 20" wide x6" deep. Top shelf is 3 1 ⁄4" high, secondand third shelves are 3 3 ⁄4" high.Requires accessory shelf (left) for support(not included), or can be used freestanding.50 lb. capacity. Does notinclude bin boxes.PART NO.NX/AS-BCPART NO.NX/BKT-FPM82

Nexus System Back Panels and Markerboard/TackboardsSturdy panels easily attachbetween frame uprights. Allpanels are available in heightsof 18" and 30".Reversible markerboard/Louvered Back PanelsSteel louvered panel is designed toaccommodate industry-standard plasticboxes that feature louvered edge or lip.PART NO. USE WITH SECTION WIDTH18" highNXLP/2418 24"NXLP/3018 30"NXLP/3618 36"NXLP/4218 42"NXLP/4818 48"NXLP/6018 60"30" highNXLP/2430 24"NXLP/3030 30"NXLP/3630 36"NXLP/4230 42"NXLP/4830 48"NXLP/6030 60"Pegboard PanelsSteel pegboard panel accepts all standardpegging devices (i.e. hooks, etc.).Pegboard holes are 1 ⁄4" in diameter.Ideal for placement of commonly usedtools.PART NO. USE WITH SECTION WIDTH18" highNXPP/2418 24"NXPP/3018 30"NXPP/3618 36"NXPP/4218 42"NXPP/4818 48"NXPP/6018 60"30" highNXPP/2430 24"NXPP/3030 30"NXPP/3630 36"NXPP/4230 42"NXPP/4830 48"NXPP/6030 60"ReversibleMarkerboard/TackboardsTwo-sided reversible board. Featureswhite magnetic markerboard on 1 sideand gray fabric tackboard on the other.Also functions as privacy panel andsound dampener. 30" high.tackboard attaches using samebrackets (available in 30" heightonly).Specify color from chart onback cover.PART NO.USE WITH SECTION WIDTHNXRMT/2430 24"NXRMT/3030 30"NXRMT/3630 36"NXRMT/4230 42"NXRMT/4830 48"Solid Privacy PanelsSteel privacy panel encloses a sectionand can also be used to hold/displayitems with magnets.PART NO.USE WITH SECTION WIDTH18" highNXSP/2418 24"NXSP/3018 30"NXSP/3618 36"NXSP/4218 42"NXSP/4818 48"NXSP/6018 60"30" highNXSP/2430 24"NXSP/3030 30"NXSP/3630 36"NXSP/4230 42"NXSP/4830 48"NXSP/6030 60"83

Easy-Order Nexus System CombinationsEach combination includes 1 Nexusstarter frame and 1 adder frame at theheight shown. Combinations designatedwith “SM” surface mount to aLista or other workbench with a worksurfaceat least 6" longer than theNexus frames. Combinations designatedwith “RM” rear mount to a ListaAlign ® adjustable height base only.Certain combinations are available withoptional overhead lights (see chartsbelow illustrations for availability).How to order an Easy-OrderNexus Accessory Combination30" High Nexus FramesIncludes:-----------Includes:■■■■■■■Includes:1. Select Easy-Order NexusAccessory configuration.2. ■ Select worksurface length.60 = 60" long (combinationconsists of 24" wide starterframe and 30" wide adderframe)72 = 72" long (combinationconsists of 30" wide starterframe and 36" wide adderframe)• (2) 12" deep shelves• (1) back stop• (1) 30" high louvered panelPART NO.NXC/SM3001-■■DESCRIPTIONsurface-mount• (2) 12" deep shelves• (1) plastic box rail• (1) 30" high markerboard/tackboard• (1) vertical power stripPART NO.NXC/SM3002-■■DESCRIPTIONsurface-mount• (2) 12" deep shelves• (1) back stop• (1) 18" high solid privacy panel• (1) 16" high overhead cabinet withretractable doorPART NO.NXC/SM3023-■■■DESCRIPTIONsurface-mount3. ■ Select paint color. For colorchart, see back cover or below.4. ■ Select lock type for modelswith overhead cabinets included.RG = individualKA = keyed-alikeMA = masterIncludes:Includes:---------------------Includes:■■■■■■■EXAMPLE: to order an NXC/SM4827Nexus combination to install on a 72"long worksurface, with Bright Bluepaint and keyed-alike locks for theoverhead cabinets, the part numberwould be NXC/SM4827-72BBKA.• (2) 12" deep shelves• (2) 15" deep shelves• (2) back stopsPART NO.NXC/SM3005-■■DESCRIPTIONsurface-mount• (2) 18" deep variable angle shelves• (1) 12" deep shelf• (1) 18" high louvered panelPART NO.NXC/SM3006-■■DESCRIPTIONsurface-mount• (1) 12" deep shelf• (1) 18" high louvered panel• (1) 16" high overhead cabinet withretractable door• (1) horizontal power rail• (1) back stopPART NO.NXC/SM3024-■■■DESCRIPTIONsurface-mount84■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

48" High Nexus Frames•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••----------------------■■■■■■■----------Includes:Includes:Includes:Includes:• (2) 12" deep shelves• (1) 15" deep shelf• (1) back stop• (1) 18" high pegboard panel• (1) 30" high louvered panelPART NO. DESCRIPTIONNXC/SM4801-■■ surface-mountNXC/SM4811-■■ surface-mount with 56"4-bulb overhead lightNXC/RM4801-■■ rear-mount for Align baseNXC/RM4811-■■ rear-mount for Alignbase with 56" 4-bulboverhead light• (2) 12" deep shelves• (1) 15" deep shelf• (1) back stop• (1) 30" high markerboard/tackboard• (1) 18" high louvered panel• (1) vertical power stripPART NO. DESCRIPTIONNXC/SM4802-■■ surface-mountNXC/SM4812-■■ surface-mount with 56"4-bulb overhead lightNXC/RM4802-■■ rear-mount for Align baseNXC/RM4812-■■ rear-mount for Alignbase with 56" 4-bulboverhead light• (2) 12" deep shelves• (1) 18" high louvered panel• (1) 16" high overhead cabinet withretractable door• (1) 30" high markerboard/tackboardPART NO.NXC/SM4823-■■■NXC/RM4823-■■■DESCRIPTIONsurface-mountrear-mount forAlign base• (2) 16" high overhead cabinets withretractable doors• (1) 12" deep shelf• (1) back stop• (1) 30" high markerboard/tackboardPART NO.NXC/SM4827-■■■NXC/RM4827-■■■DESCRIPTIONsurface-mountrear-mount forAlign base-------------------------------------------Includes:Includes:Includes:Includes:• (4) 12" deep shelves• (2) 15" deep shelves• (2) back stopsPART NO. DESCRIPTIONNXC/SM4804-■■ surface-mountNXC/SM4814-■■ surface-mount with 56"4-bulb overhead lightNXC/RM4804-■■ rear-mount for Align baseNXC/RM4814-■■ rear-mount for Alignbase with 56" 4-bulboverhead light• (2) 12" deep shelves• (1) 15" deep shelf• (1) back stop• (1) 16" high overhead cabinet withretractable door• (1) 30" high louvered panelPART NO.NXC/SM4825-■■■NXC/RM4825-■■■DESCRIPTIONsurface-mountrear-mount forAlign base• (2) 12" deep shelves• (2) 30" high louvered panelsPART NO. DESCRIPTIONNXC/SM4806-■■ surface-mountNXC/SM4816-■■ surface-mount with 56"4-bulb overhead lightNXC/RM4806-■■ rear-mount for Align baseNXC/RM4816-■■ rear-mount for Alignbase with 56" 4-bulboverhead light• (2) 16" high overhead cabinets withretractable doors• (1) 30" high markerboard/tackboard• (1) 30" high louvered panelPART NO.NXC/SM4828-■■■NXC/RM4828-■■■DESCRIPTIONsurface-mountrear-mount forAlign base■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■FW (White paint)85

Nexus System Packing Bench AccessoriesIf you need to pack and shipproducts, and you want to getthe job done quickly and efficiently,Lista delivers the completepackage you’ve beenlooking for. Our advanced,modular benches are specificallydesigned for packing andshipping applications. Fullycustomizable, they will accom -mo date your needs today andin the future.Lista’s packing and shippingbenches bundle together anarray of superior features andbenefits. Extremely flexible, thebenches come in a variety oflengths (48" to 96") and depthsand are available with a wideselection of worksurfaces,including butcher block, ListaTop, and galvanized or stainlesssteel over wood.The addition of the NexusSystem and its wide array ofaccessories means that yourpacking benches can be customizedto exactly suit yourneeds, without a custom price.TO ORDER AN EASY-ORDERCOMBINATION (PRECON-FIGURED NEXUS SYSTEMPACKING BENCH), SEEPAGES 90-91.86

Nexus System Packing Bench Accessory FeaturesOur packing benches can beconfigured with cabinet bases orlegs to create a cost-effective,custom solution. With our modulardrawer storage cabinets doubling aspedestals, users have systematic,efficient storage for their supplies,tools, paperwork and accessories.Beneath the worksurface,vertical wire shelf dividers providecustom storage for corrugated orother bulk materials.Above the worksurface, Lista’smodular Nexus System provides afull range of accessories that offereasy access to packing mat erials atarm height. There are holders forrolls of paper, bubble rolls andlabels. Vertical wire dividers areavailable to keep shelf storage organized.Other Nexus accessoriesinclude louvered panels to hold bins,plastic box rails, electrical attachments,overhead cabinets, computermonitor trays, document holdersand many more (see pages 77-83).Adjustable shelves withor without vertical wiredividersRoll holder for tapeand labelsVertical power stripBack stopChoice of worksurfacesLegs toaccommodate shelvesLouvered panel forplastic binsRoll holder for large rollsCabinet pedestals in avariety of widths andconfigurationsVariety of shelf lengths87

Nexus System Packing Bench Below-Worksurface AccessoriesPacking benches can bedesigned using a full range ofLista workbench products:• Technical workstation components,pages 42-43• Industrial workbench components,pages 56-57• Cabinet pedestals,pages 60-71• Nexus System accessories,pages 76-85The additional componentsshown on the following twopages enable you to equip apacking bench that exactly suitsyour needs.Packing Bench Leg InsertsFor use with either tech or industriallegs. Allows multiple shelves and/or aroll holder to be mounted betweenlegs. Not needed for applications usingonly one bottom shelf.PART NO. FOR LEG USE WITHHEIGHT CAB. HEIGHTWBPBB-27.5 27.5" 600 w/o baseWBPBB-29.5 29.5" 600 with 2" baseWBPBB-31.5 31.5" 600 with 4" baseWBPBB-33.5 33.5" 600 with 6"baseor 750 w/o baseWBPBB-35.5 35.5" 750 with 2" baseWBPBB-39.5 39.5" 900 w/o baseBottom ShelvesHeavy gauge steel shelf, 16" deep.Pre-punched holes accept vertical wiredividers. Applications using morethan one bottom shelf and at leastone leg support require packingbench leg insert(s) (see left).PART NO. WORKSURFACE LENGTHBS-4816 ■■ 48"BS-6016 ■■ 60"BS-7216 ■■ 72"BS-8416 ■■ 84"BS-9616 ■■ 96"How to order a packingbench bottom shelf1. Select part number based onworksurface length.2. ■ Specify left-hand (facing theworkbench) bench support.TLLLNWMP= Tech Leg= Lista Leg= NW cabinet= MP cabinet3. ■ Specify right-hand (facingthe workbench) bench support.TLLLNWMP= Tech Leg= Lista Leg= NW cabinet= MP cabinetEXAMPLE: to order a bottom shelffor a packing bench with a 72"worksurface, an MP Width cabinetas the left-hand pedestal and a TechLeg as the right-hand support, thepart number would beBS-7216MPTL.Vertical WireDividers forBottomShelves15" deep dividersare 1 ⁄4" diametergalvanized wire that fit into prepunchedholes in the 16" deep shelf.No hardware required.Roll Holders (Leg/CabinetMount)For dispensing paper, bubble rolls, etc.Holder mounts between tech panellegs, industrial panel legs and/or cabinetpedestals. Includes 1" dia meter rodand brackets (unpainted galvanizedsteel). 100 lb. weight capacity.Applications using at least one legsupport require packing bench leginsert(s) (see left). Usable widthvaries by configuration. Contact Listafor exact dimensions.PART NO. WORKSURFACE LENGTHRH-48 ■ ■ 48"RH-60 ■ ■ 60"RH-72 ■ ■ 72"RH-84 ■ ■ 84"RH-96 ■ ■ 96"How to order a packing benchbelow-worksurface roll holder1. Select part number based onworksurface length.2. ■ Specify left-hand (facing theworkbench) bench support.TLLLNWMP= Tech Leg= Lista Leg= NW cabinet= MP cabinet3. ■ Specify right-hand (facingthe workbench) bench support.TLLLNWMP= Tech Leg= Lista Leg= NW cabinet= MP cabinetEXAMPLE: to order a roll holder fora packing bench with a 72" worksurface,an MP Width cabinet as theleft-hand pedestal and a Tech Leg asthe right-hand support, the partnumber would be RH-72MPTL.PART NO. HEIGHTNXS/WD150-15 6"NXS/WD250-15 10"NXS/WD450-15 18"88

Nexus System Packing Bench Above-Worksurface AccessoriesFor Nexus system frames, seepage 76. Specify color fromchart on back cover.Adjustable ShelvesWithout LipAdjustable steel shelf has a 100 lb.weight capacity. Supports are attachedthrough a simple double-notch systemthat insert into slots on the Nexusuprights. Available in depths of 12"and 15". Pre-punched holes acceptvertical wire dividers (see below).PART NO. SHELF WIDTH12" deepNXS/A2412D 24"NXS/A3012D 30"NXS/A3612D 36"NXS/A4212D 42"NXS/A4812D 48"NXS/A6012D 60"15" deepNXS/A2415D 24"NXS/A3015D 30"NXS/A3615D 36"NXS/A4215D 42"NXS/A4815D 48"NXS/A6015D 60"Vertical Wire Dividers forAdjustable ShelvesDividers are 1 ⁄4" diameter galvanizedwire that fit into pre-punched holes inthe shelf. No hardware required. Depthmust match shelf depth.PART NO.HEIGHTFor 12" deep shelvesNXS/WD150-12 6"NXS/WD250-12 10"NXS/WD450-12 18"For 15" deep shelvesNXS/WD150-15 6"NXS/WD250-15 10"NXS/WD450-15 18"Deep Shelves Without LipShelves are 18" or 24" deep with a150 lb. weight capacity. Can bemounted in a forward or set-back positionbetween uprights for maximumflexibility. Pre-punched holes acceptvertical wire dividers (see below).PART NO. SHELF WIDTH18" deepNXS/V2418D 24"NXS/V3018D 30"NXS/V3618D 36"NXS/V4218D 42"NXS/V4818D 48NXS/V6018D 60"24" deepNXS/V2424D 24"NXS/V3024D 30"NXS/V3624D 36"NXS/V4224D 42"NXS/V4824D 48Vertical Wire Dividers forDeep ShelvesDividers are 1 ⁄4" diameter galvanizedwire that fit into pre-punched holes inthe shelf. No hardware required. Depthmust match shelf depth.PART NO.HEIGHTFor 18" deep shelvesNXS/WD150-18 6"NXS/WD250-18 10"NXS/WD450-18 18"For 24" deep shelvesNXS/WD150-24 6"NXS/WD250-24 10"NXS/WD450-24 18"Roll Holders (ExtendedMount)For dispensing paper, bubble rolls, etc.Includes 1" dia meter rod and brackets.Brackets mount to Nexus uprights andextend 3" forward from the face of theuprights to allow for larger diameterrolls. Rod is unpainted galvanized steel;brackets are painted to match frame.100 lb. weight capacity.PART NO. USE WITH USB. INSIDESECTION WDTH. WIDTHNXRH/E24 24" 22"NXRH/E30 30" 28"NXRH/E36 36" 34"NXRH/E42 42" 40"NXRH/E48 48" 46"NXRH/E60 60" 58"Label/Roll Holders (InteriorMount)For dispensing labels and other smallerrolls. Brackets mount flush betweenNexus uprights. Includes 1" dia meterrod and brackets. Rod is unpainted galvanizedsteel; brackets are painted tomatch frame. 100 lb. weight capacity.PART NO. USE WITH USB. INSIDESECTION WDTH. WIDTHNXRH/C24 24" 22"NXRH/C30 30" 28"NXRH/C36 36" 34"NXRH/C42 42" 40"NXRH/C48 48" 46"NXRH/C60 60" 58"Nexus stands and trolleys can beconfigured with Nexus packingbench accessories to make anideal addition to any packing orshipping area. See pages 92-95.89

Easy-Order Nexus System Packing Bench CombinationsThe packing benches shown on the followingtwo pages are pre-configured toinclude the most popular and versatilestyles of packing benches we offer. Todesign a custom bench to suit yourexact needs, see pages 88-89.Easy-Order packing benches includetechnical panel legs, and are 33 1 ⁄2"high. Optional Nexus System packingbench combinations are 48" high.How to order an Easy-OrderPacking Bench1. Select Easy-Order packingbench configuration.2. ■ Select worksurface style.LTS = Lista TopGLS = Galvanized steelBTS = Butcher blockAll worksurfaces have a standardsquare edge and are 30"deep.3. ■ Select worksurface size.4830 = 48" long x 30" deep6030 = 60" long x 30" deep7230 = 72" long x 30" deepSingle Bay Packing BenchesFRONT VIEWPART NO.PS6000-■■■5" HIGH HANGING CABINETBOTTOM SHELFBOTTOM SHELFINCLUDESWBHC150-1 hanging cabinet5" HIGH HANGING CABINETSIDE VIEW4. ■ Select paint color. For colorchart, see back cover.WIRE DIVIDERSBOTTOM SHELFHow to order an optionalEasy-Order Nexus SystemPacking Bench Combination1. Select Easy-Order NexusSystem configuration.2. ■ Select system length(length must correspond to worksurfacelength as shown below).42 = for 48" long worksurface48 = for 60" long worksurface60 = for 72" long worksurface4. ■ Select paint color. For colorchart, see back cover.EXAMPLE: to order a PS6200packing bench with a 72" longbutcher block worksurface and amatching Nexus System combinationwith Bright Blue paint, thebench part number would bePS6200-BTS7230BB, and theNexus System part number wouldbe NXC/SM48-PB01-60BB.PART NO.PS6100-■■■PART NO.PS6200-■■■PART NO.PS6300-■■■INCLUDESWBHC150-1 hanging cabinetROLL HOLDER3" HIGH DRAWER7" HIGH DRAWERFILE DRAWERWIRE DIVIDERSBOTTOM SHELF6" BASEINCLUDESNW0600-0303N-F6RG cabinetOptional Nexus System Packing Bench CombinationSTARTER UPRIGHTSWIRE DIVIDERSADJUSTABLE SHELFHORIZONTAL RAILADJUSTABLE SHELF------------------------ROLL HOLDERLOUVERED PANELPART NO.HEIGHTNXC/SM48-PB01-■■ 48"90■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

Long Packing BenchesFRONT VIEWSIDE VIEWHow to order a longEasy-Order Packing Bench1. Select Easy-Order packingbench configuration.ROLLHOLDERPART NO. ROLL HOLDER LENGTH BOTTOM SHELF LENGTHPS6400-■■■ 72" top: 36" long; 84" & 96" top: 48" long 72"& 84" top: 24 1 ⁄4" long; 96" top: 36 1 ⁄4" longBOTTOM SHELFBOTTOM SHELFWIRE DIVIDERSBOTTOM SHELF5" HIGH HANGING CABINETWIRE DIVIDERSBOTTOM SHELF2. ■ Select worksurface style.LTS = Lista TopGLS = Galvanized steelBTS = Butcher blockAll worksurfaces have a standardsquare edge and are 30"deep.3. ■ Select worksurface size.7230 = 72" long x 30" deep8430 = 84" long x 30" deep9630 = 96" long x 30" deep4. ■ Select paint color. For colorchart, see back cover.PART NO. INCLUDES BOTTOM SHELF LENGTHPS6500-■■■ WBHC150-1 hanging cabinet all shelves are equal lengthBOTTOM SHELFBOTTOM SHELFPART NO.PS6600-■■■2" HIGH DRAWER2" HIGH DRAWER3" HIGH DRAWER5" HIGH DRAWER7" HIGH DRAWERPART NO.PS6700-■■■6" BASEINCLUDESNW0600-0303N-F6RG cabinetINCLUDESNW0600-0501N-F6RG and NW0600-0201N-F6RG cabinetsOptional Nexus System Packing Bench Combination3" HIGH DRAWER7" HIGH DRAWERFILE DRAWER6" BASEFILE DRAWERFILE DRAWERWIRE DIVIDERSBOTTOM SHELF6" BASEHow to order an optionalEasy-Order Nexus SystemPacking Bench Combination1. Select Easy-Order NexusSystem configuration.2. ■ Select system length(length must correspond to worksurfacelength as shown below).66 = for 72" long worksurface78 = for 84" long worksurface90 = for 96" long worksurface4. ■ Select paint color. For colorchart, see back cover.EXAMPLE: to order a PS6600packing bench with an 84" longbutcher block worksurface and amatching Nexus System combinationwith Bright Blue paint, thebench part number would bePS6600-BTS8430BB, and theNexus System part number wouldbe NXC/SM48-PB02-78BB.STARTER AND ADDER UPRIGHTSWIRE DIVIDERSADJUSTABLE SHELFHORIZONTAL RAILADJUSTABLE SHELFHORIZONTAL RAILWIRE DIVIDERSADJUSTABLE SHELFROLL HOLDERLOUVERED PANEL--------------ADJUSTABLE SHELFROLL HOLDERBACK STOPPART NO. HEIGHT STARTER SECTION WIDTH ADDER SECTION WIDTHSNXC/SM48-PB02-■■ 48" 42" 24" for 72" worksurface, 36" for 84" worksurface, 48" for 96" worksurface■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■FW (White paint)91

➤Nexus System Stationary Stands and Mobile TrolleysNexus stationary stands andmobile trolleys are the perfectcomplement to any production,repair or assembly workspace.Hold and/or transport parts,tools, test equipment andalmost anything else you canthink of, with the convenienceof a small footprint.Designed to accept all NexusSystem accessories, these miniworkstationscan be configuredto exactly suit your needs. Forthe complete range of Nexusaccessories, see pages 77-83:• Shelves, page 77• Lights, page 78• Power, page 79• Pivoting accessories, page 82Stands are available in fourheights (48", 60", 72" and 84")and six widths (24", 30", 36", 42",48" and 60"). Trolleys are availablein the same widths, and in heightsof 48" and 60" (casters add anadditional 6" to overall height).Stands and trolleys can beordered in either rear-justified orcenter-justified configurations.Add a worksurface, and yourNexus stand becomes an economicalworkbench.For weight capacities for stationarystands and mobile trolleys,contact Lista Customer Service.➤28" ➤➤ 6"➤➤28" ➤34" ➤➤ 6"REAR-JUSTIFIED CENTER-JUSTIFIED REAR-JUSTIFIED CENTER-JUSTIFIEDSTAND OR TROLLEY STAND OR TROLLEY STAND OR TROLLEY STAND OR TROLLEYFOR 24" DEEP FOR 12" DEEP FOR 30" DEEP FOR 15" DEEPWORKSURFACE SHELVES WORKSURFACE SHELVESNEXUS CNC TOOL STANDS ANDTROLLEYSFor Nexus system CNC toolstands and trolleys, see ourGeneral Storage Catalog.➤➤➤34" ➤➤6"Full range of Nexus Systemaccessories availableCreate work areas usingeither Nexus shelves orworksurfacesCenter- or rear-justifiedMobile trolleys orstationary stands92

Nexus Stationary StandFramesNexus stand frames consist of 2 uprightposts and 2 horizontal rails, with 2 feet.Adder sets consist of an additionalupright and 2 horizontal rails with 1foot. Frames are sturdy, heavy gaugesteel, and are notched front and backat 1" increments for mounting accessories.Includes 4 adjustable glides.Specify stand depth in place of blue box(■) in part number.28 = 28" overall depth34 = 34" overall depth48" High Rear-Justified Frames52 3 ⁄4" OAH, 42" available for panelsPART NO.Starter setNXF/FSR2448-■NXF/FSR3048-■NXF/FSR3648-■NXF/FSR4248-■NXF/FSR4848-■NXF/FSR6048-■Adder setNXF/FSR2448A-■NXF/FSR3048A-■NXF/FSR3648A-■NXF/FSR4248A-■NXF/FSR4848A-■NXF/FSR6048A-■48" High Center-JustifiedFrames52 3 ⁄4" OAH, 42" available for panelsPART NO.Starter setAdder setNXF/FSC2448-■ NXF/FSC2448A-■NXF/FSC3048-■ NXF/FSC3048A-■NXF/FSC3648-■ NXF/FSC3648A-■NXF/FSC4248-■ NXF/FSC4248A-■NXF/FSC4848-■ NXF/FSC4848A-■NXF/FSC6048-■ NXF/FSC6048A-■60" High Rear-Justified Frames64 3 ⁄4" OAH, 54" available for panelsPART NO.Starter setAdder setNXF/FSR2460-■ NXF/FSR2460A-■NXF/FSR3060-■ NXF/FSR3060A-■NXF/FSR3660-■ NXF/FSR3660A-■NXF/FSR4260-■ NXF/FSR4260A-■NXF/FSR4860-■ NXF/FSR4860A-■NXF/FSR6060-■ NXF/FSR6060A-■60" High Center-JustifiedFrames64 3 ⁄4" OAH, 54" available for panelsPART NO.Starter setAdder setNXF/FSC2460-■ NXF/FSC2460A-■NXF/FSC3060-■ NXF/FSC3060A-■NXF/FSC3660-■ NXF/FSC3660A-■NXF/FSC4260-■ NXF/FSC4260A-■NXF/FSC4860-■ NXF/FSC4860A-■NXF/FSC6060-■ NXF/FSC6060A-■72" High Rear-Justified Frames76 3 ⁄4" OAH, 66" available for panelsPART NO.Starter setAdder setNXF/FSR2472-■ NXF/FSR2472A-■NXF/FSR3072-■ NXF/FSR3072A-■NXF/FSR3672-■ NXF/FSR3672A-■NXF/FSR4272-■ NXF/FSR4272A-■NXF/FSR4872-■ NXF/FSR4872A-■NXF/FSR6072-■ NXF/FSR6072A-v72" High Center-JustifiedFrames76 3 ⁄4" OAH, 66" available for panelsPART NO.Starter setAdder setNXF/FSC2472-■ NXF/FSC2472A-■NXF/FSC3072-■ NXF/FSC3072A-■NXF/FSC3672-■ NXF/FSC3672A-■NXF/FSC4272-■ NXF/FSC4272A-■NXF/FSC4872-■ NXF/FSC4872A-■NXF/FSC6072-■ NXF/FSC6072A-■84" High Rear-Justified Frames88 3 ⁄4" OAH, 78" available for panelsPART NO.Starter setAdder setNXF/FSR2484-■ NXF/FSR2484A-■NXF/FSR3084-■ NXF/FSR3084A-■NXF/FSR3684-■ NXF/FSR3684A-■NXF/FSR4284-■ NXF/FSR4284A-■NXF/FSR4884-■ NXF/FSR4884A-■NXF/FSR6084-■ NXF/FSR6084A-■84" High Center-JustifiedFrames88 3 ⁄4" OAH, 78" available for panelsPART NO.Starter setAdder setNXF/FSC2484-■ NXF/FSC2484A-■NXF/FSC3084-■ NXF/FSC3084A-■NXF/FSC3684-■ NXF/FSC3684A-■NXF/FSC4284-■ NXF/FSC4284A-■NXF/FSC4884-■ NXF/FSC4884A-■NXF/FSC6084-■ NXF/FSC6084A-■WorksurfacesFor descriptions, see page 42. To ordera bullnose edge, add “BN” to the endof the part number. Requires worksurfacebrackets (see below). Foruse with rear-justified frames only.PART NO. SIZEButcher blockBTOP-2424 24" long x 24" deepBTOP-3024 30" long x 24" deepBTOP-3624 36" long x 24" deepBTOP-4224 42" long x 24" deepBTOP-4824 48" long x 24" deepBTOP-6024 60" long x 24" deepBTOP-30 30" long x 30" deepBTOP-36 36" long x 30" deepBTOP-42 42" long x 30" deepBTOP-48 48" long x 30" deepBTOP-60 60" long x 30" deepPlastic laminatePTOP-2424 24" long x 24" deepPTOP-3024 30" long x 24" deepPTOP-3624 36" long x 24" deepPTOP-4224 42" long x 24" deepPTOP-4824 48" long x 24" deepPTOP-6024 60" long x 24" deepPTOP-30 30" long x 30" deepPTOP-36 36" long x 30" deepPTOP-42 42" long x 30" deepPTOP-48 48" long x 30" deepPTOP-60 60" long x 30" deepWorksurface BracketsRequired to attach worksurface (above)to stationary stand. Includes 2 brackets.For use with rear-justified framesonly.PART NO.NX/WST-KIT/24NX/WST-KIT/30FOR USE WITH24" deep worksurface30" deep worksurfaceNexus MobileTrolley FramesNexus trolley framesconsist of 2 uprightposts and 2 horizontalrails, with 2 feet.Frames are sturdy,heavy gauge steel,and are notched frontand back at 1" increments for mountingaccessories. Supported by (4) 5"diameter casters, 2 swivel and 2 swivelwith wheel locks. Includes a handle.48" High Rear-Justified Frames57 3 ⁄4" OAH, 42" available for panelsPART NO.WIDTHNXF/MTR2448-■ 24"NXF/MTR3048-■ 30"NXF/MTR3648-■ 36"NXF/MTR4248-■ 42"NXF/MTR4848-■ 48"NXF/MTR6048-■ 60"48" High Center-Justified FramesPART NO.WIDTHNXF/MTC2448-■ 24"NXF/MTC3048-■ 30"NXF/MTC3648-■ 36"NXF/MTC4248-■ 42"NXF/MTC4848-■ 48"NXF/MTC6048-■ 60"60" High Rear-Justified Frames69 3 ⁄4" OAH, 54" available for panelsPART NO.WIDTHNXF/MTR2460-■ 24"NXF/MTR3060-■ 30"NXF/MTR3660-■ 36"NXF/MTR4260-■ 42"NXF/MTR4860-■ 48"NXF/MTR6060-■ 60"60" High Center-Justified FramesPART NO.WIDTHNXF/MTC2460-■ 24"NXF/MTC3060-■ 30"NXF/MTC3660-■ 36"NXF/MTC4260-■ 42"NXF/MTC4860-■ 48"NXF/MTC6060-■ 60"Mobile TrolleyAccessoriesIndividual castersreplace the ones thatcome with trolley.Handle is single handle.PART NO.CAST5X1S-NBCAST5X1S-WBNX/MT-HANDLDESCRIPTION(1) swivel 5" caster(1) swivel 5" caster withwheel lockside handle93

➤➤➤➤➤➤Easy-Order Nexus System Stands and TrolleysEasy-Order stands (page 94) includeleveling glides, and are 60", 72" or84" high. Trolleys (page 95) include2 swivel and 2 swivel with wheel locks3 1 ⁄2" diameter casters (250 lb. capacityper caster), and a handle, and areeither 48" or 60" high (plus height ofcasters). Stands and trolleys are 28"deep.How to order an Easy-OrderNexus Stand or TrolleyFront ViewRear-justified-------------30" HIGH LOUVERED PANELBACK STOPWORKSURFACE12" DEEP ADJUSTABLE SHELF12" DEEP ADJUSTABLE SHELFBIN RAILBACK STOPWORKSURFACESide ViewRear-justified1. Select Easy-Order stand ortrolley configuration.2. ■ Select worksurface stylefor models NXF/FSR01, NXF/FSR02,NXF/FSR03 and NXF/FSR04.P2 = Plastic laminateB2 = Butcher blockWorkstandPART NO.NXF/FSR01■-■■■NXF/FSR01■-■■■ ADESCRIPTIONstarteradderWorkstandPART NO.NXF/FSR02■-■■■NXF/FSR02■-■■■ ADESCRIPTIONstarteradder28" ➤➤ 6"All worksurfaces have a bullnosefront edge and are 24" deep.3. ■ Select width.24 = 24" wide30 = 30" wide36 = 36" wide42 = 42" wide48 = 48" wide60* = 60" wide30" HIGH MARKER/TACKBOARDBACK STOPWORKSURFACE18" DEEP VARIABLE ANGLE SHELF18" DEEP VARIABLE ANGLE SHELFBACK STOPWORKSURFACE*not available for models thatinclude markerboard/tackboard4. ■ Select height.For stands:60 = 60" high72 = 72" high84 = 84" highFor trolleys:48 = 48" high60 = 60" highWorkstandPART NO.NXF/FSR03■-■■■NXF/FSR03■-■■■ ADESCRIPTIONstarteradderWorkstandPART NO.NXF/FSR04■-■■■NXF/FSR04■-■■■ ADESCRIPTIONstarteradder28" ➤➤ 6"5. ■ Select paint color. For colorchart, see back cover or below.EXAMPLE: to order an NXF/FSR04stand that is 36" wide and 60" high,with a butcher block worksurface andBright Blue paint, the part numberwould be NXF/FSR04B2-3660BB.30" HIGH MARKER/TACKBOARDBIN RAIL15 AMP HORIZONTAL POWER RAIL-------------30" HIGH LOUVERED PANELCompanion StandPART NO.NXF/FSR05-■■■NXF/FSR05-■■■ ADESCRIPTIONstarteradderCompanion StandPART NO.NXF/FSR06-■■■NXF/FSR06-■■■DESCRIPTIONstarteradder28" ➤➤ 6"94■ BE (Beige paint) ■ BB (Bright Blue paint) ■ BK (Black paint) ■ CB (Classic Blue paint) ■GR (Dark Gray paint)

➤➤➤➤➤➤➤➤➤➤➤➤➤➤➤Front ViewRear-justifiedSide ViewRear-justifiedFront ViewCenter-justifiedSide ViewCenter-justified30" HIGH MARKER/TACKBOARD30" HIGH MARKER/TACKBOARD18" DEEP VARIABLE ANGLE SHELF12" DEEP ADJUSTABLE SHELF6"➤6"➤TrolleyPART NO.NXF/MTR07-■■■28" ➤➤ 6"Trolley• Includes (2) 12" deep adjustableshelves28" ➤PART NO.NXF/MTC08-■■■--------------------------LOUVERED PANELLOUVERED PANEL6"➤--------------------------LOUVERED PANELLOUVERED PANEL6"➤Bin Trolley• 48" high trolley includes (1) 24" highand (1) 18" high louvered panels• 60" high trolley includes (1) 30" highand (1) 24" high louvered panels28" ➤➤ 6"Bin Trolley• 48" high trolley includes (2) 24" highand (2) 18" high louvered panels• 60" high trolley includes (2) 30" highand (2) 24" high louvered panels28" ➤PART NO.NXF/MTR09-■■■PART NO.NXF/MTC10-■■■18" DEEP VARIABLE ANGLE SHELF12" DEEP ADJUSTABLE SHELF18" DEEP VARIABLE ANGLE SHELF12" DEEP ADJUSTABLE SHELF18" DEEP VARIABLE ANGLE SHELF12" DEEP ADJUSTABLE SHELF6"➤6"➤Shelf TrolleyPART NO.NXF/MTR11-■■■28" ➤➤ 6"Shelf Trolley• Includes (6) 12" deep adjustableshelves28" ➤PART NO.NXF/MTC12-■■■■ GG (Green paint) ■ LG (Light Gray paint) ■ NR (Red paint) ■ SN (Sand paint) ■FW (White paint)95

➤Nexus System Flow RacksNexus flow racks are an➤effective material handlingsolution for presenting parts forpicking, kitting or assembly.Parts delivery by gravityfeeding cartons or parts binsreduces the need for parts deliverypersonnel, allowing one personto service more productionor packaging stations. Byassembling flow racks in rows,you can achieve even greaterproductivity and convenience.Designed to accept anyNexus System accessories, flowracks can be configured toexactly suit your needs. Forthe complete range of NexusSystem accessories, seepages 77-83:• Shelves, page 77• Lights, page 78• Power, page 79• Pivoting accessories, page 82Add a worksurface, and yourstationary Nexus flow rackbecomes a highly efficientassembly or work station.Flow rack frames are 86 3 ⁄4"high and 48" deep, and areavailable in five widths (30",36", 42", 48" and 60").➤➤42 3 ⁄4"48"➤➤86 3 ⁄4" **casters add 6" to overall height;leg kit adds 3" to overall heightPAINT COLORS – PLEASE NOTE!• Nexus flow racks are availablein Light Gray only.• Other colors, includingother standard Lista colors,are available on request atan additional charge.Fully configurable tracksand guidesShelves can be mounted in avariety of positions and anglesThe Nexus Flow Rack is completelyconfigurable, and can beequipped with such task-specificaccessories as overhead lights,shelves and worksurfaces.Equipped with adjustable glides(some configurations availablewith casters for mobility)96

Nexus Flow Rack FramesNexus flow rack starter frames consistof 4 upright posts and 8 horizontalrails. Adder sets consist of 2 additionaluprights and 6 horizontal rails. Framesare sturdy, heavy gauge steel, and arenotched front and back at 1" incrementsfor mounting accessories.Includes 4 adjustable glides. 1,800 lb.weight capacity. Optional casters available(see right).PART NO.WIDTHStarter set Adder setNXFR/3084 NXFR/3084A 30"NXFR/3684 NXFR/3684A 36"NXFR/4284 NXFR/4284A 42"NXFR/4884 NXFR/4884A 48"NXFR/6084 NXFR/6084A 60"Nexus Flow Rack RollerShelvesAll tracks and guides are ordered individually(see below). 600 lb. weightcapacity.PART NO. # GUIDE/ROLLER HOLES WIDTHNXFR/S30 17 30"NXFR/S36 21 36"NXFR/S42 25 42"NXFR/S48 29 48"NXFR/S60 37 60"Nexus Flow Rack ShelfAccessoriesShelves are slotted on 1 1 ⁄2" incrementsto accept roller tracks andguides. Guides separate sections.Rollers are 11 ⁄16" wide; tracks are1" wide. Two rollers are recommendedfor rows up to 15" wide, and 3 or morefor wider rows.PART NO.NXFR/S-TRACK48NXFR/S-GUIDE48NXFR/S-CLIPDESCRIPTIONroller trackroller guidereplacement clipPlastic Laminate WorksurfacesParticle board core with plastic laminatetop and sides. 1 9 ⁄16" thick. Dovegray is standard but other colors areavailable on request. To order a bullnoseedge, add “BN” to the end of thepart number. Requires worksurfacebracket/foot kit (see below).PART NO.WIDTH24" deep 30" deepPTOP-3024 PTOP-30 30"PTOP-3624 PTOP-36 36"PTOP-4224 PTOP-42 42"PTOP-4824 PTOP-48 48"PTOP-6024 PTOP-60 60"Worksurface Bracket/Foot KitsRequired to mount worksurface (above)to flow rack. Starter set includes2 worksurface brackets, 2 feet, and1 horizontal rail, and should be orderedfor the first flow rack section that willhave an attached worksurface. Addersets include 2 worksurface brackets,1 foot, and 1 horizontal rail, and shouldbe ordered for all subsequent flow racksections that will have an attachedworksurface. Adds 3" to overall height.PART NO.WORKSURF. SIZEStarter setNXFR/WST-KIT/3024 30" x 24"NXFR/WST-KIT/3624 36" x 24"NXFR/WST-KIT/4224 42" x 24"NXFR/WST-KIT/4824 48" x 24"NXFR/WST-KIT/6024 60" x 24"NXFR/WST-KIT/3030 30" x 30"NXFR/WST-KIT/3630 36" x 30"NXFR/WST-KIT/4230 42" x 30"NXFR/WST-KIT/4830 48" x 30"NXFR/WST-KIT/6030 60" x 30"Adder setNXFR/WST-KIT/3024A 30" x 24"NXFR/WST-KIT/3624A 36" x 24"NXFR/WST-KIT/4224A 42" x 24"NXFR/WST-KIT/4824A 48" x 24"NXFR/WST-KIT/6024A 60" x 24"NXFR/WST-KIT/3030A 30" x 30"NXFR/WST-KIT/3630A 36" x 30"NXFR/WST-KIT/4230A 42" x 30"NXFR/WST-KIT/4830A 48" x 30"NXFR/WST-KIT/6030A 60" x 30"Caster SetsAllows individual flow rack frames tobe movable. Adds 6" to overall height.For use with stand-alone starterframes without worksurfaces only.1,000 lb. capacity overall.PART NO. DESCRIPTIONNXFR/CAST5 set of (2) swivel & (2) swivelcasters with wheel lockCAST5X1S-NB (1) swivel 5" casterCAST5X1S-WB (1) swivel with wheel lock5" casterEasy-Order Nexus Flow Rack CombinationsThe combinations below are configuredto be most useful in a wide variety ofapplications.Combinations With 2 ShelvesSTARTER SET ADDER SET WIDTH EACH SHELFPART NO. PART NO. INCLUDESNXFR/C3084-2 NXFR/C3084-2A 30" (4) roller tracks and (1) guideNXFR/C3684-2 NXFR/C3684-2A 36" (4) roller tracks and (1) guideNXFR/C4284-2 NXFR/C4284-2A 42" (6) roller tracks and (2) guidesNXFR/C4884-2 NXFR/C4884-2A 48" (6) roller tracks and (2) guidesNXFR/C6084-2 NXFR/C6084-2A 60" (8) roller tracks and (3) guidesCombinations With 3 ShelvesSTARTER SET ADDER SET WIDTH EACH SHELFPART NO. PART NO. INCLUDESNXFR/C3084-3 NXFR/C3084-3A 30" (4) roller tracks and (1) guideNXFR/C3684-3 NXFR/C3684-3A 36" (6) roller tracks and (1) guideNXFR/C4284-3 NXFR/C4284-3A 42" (6) roller tracks and (2) guidesNXFR/C4884-3 NXFR/C4884-3A 48" (9) roller tracks and (2) guidesNXFR/C6084-3 NXFR/C6084-3A 60" (12) roller tracks and (3) guides97

SeatingLista offers three models ofseating ideal for workstations.Each features pneumatic seatheight adjustments, single levercontrol, anatomically shapedseats with lumbar support forergonomic comfort and safety,and a chrome footrest. All seatsare available in mid or highback, in fabric or vinyl, and withcasters or glides which conformto the contour of the floor forsafety and comfort.Seat height with glides is18"-26". Adjustable T-arms areoptional. ESD feature is alsooptional for fabric or vinyl. Ourseating meets the Cal 117 flammabilitycode, with an optionalCal 133 rating. Seating requiresassembly.Our seating features a lifetimestructural warranty, 5-yearmechanical warranty and 3-yearupholstery warranty.Seating Standard Features• Black vinyl material• Glides• Base – 5 star nylon reinforced• Chrome foot ring• Pneumatic height adjustment with300 lb. rated capacity• Lifetime structural warranty, 5-yearmechanical warranty, 3-year upholsterywarranty• Flammability – meets Cal 117 code• Lumbar support back• Ergonomic waterfall front seat edgeSeating with SDMechanism• Seat height adjusts from 18"-26"• Manual back depth adjustment• Fixed seat anglePART NO.V79-2S-■-■-■V79-2S-VA1-■-■-■V79-3S-■-■-■V79-3S-VA1-■-■-■V79-5S-■*V79-5S-VA1-■*DESCRIPTIONmid back armlessmid back withadjustable T-armhigh back armlesshigh back withadjustable T-armpoly. back & seatarmlesspoly. back & seatw/adjustable T-arm*poly. back and seat are made from a selfskinning polyurethane, available in blackvinyl onlySeating with AXMechanism• Seat height adjusts from 18"-26"• Back angle adjustment – eitherfree-floating or variable lock• Fixed seat angle• Back height adjusts from a seatedpositionPART NO.V79-2A-■-■-■V79-2A-VA1-■-■-■V79-3A-■-■-■V79-3A-VA1-■-■-■DESCRIPTIONmid back armlessmid back withadjustable T-armhigh back armlesshigh back withadjustable T-armMID BACK WITHOPTIONALBURGUNDY FABRICFabric ColorsOther fabric and vinyl colors availableon request.048 Burgundy055 Navy022 Gray024 Green026 BlackHIGH BACK WITH OPTIONAL GREEN FABRICPOLY BACK AND SEATHow to order seating1. Select either SD mechanismor AX mechanism. Part numbershown in the charts to the leftincludes black vinyl seat andback, and glides. To specify fabricor casters, add options to partnumber (below).2. ■ Change to fabric fromblack vinyl (optional).048 = Burgundy055 = Navy022 = Gray024 = Green026 = Black3. ■ Change to casters fromglides (optional).C1 = hard floor castersC2 = carpet casters4. ■ Add additional options.ESD* = ESD features in seatand castersCAL133* = meets Cal 133flammability code*ESD and CAL133 can not be ordered forsame seatEXAMPLE: to order a V79-3S highback armless seat with Navy fabric,carpet casters and ESD features, thepart number would beV79-3S-055-C2-ESD.98

Catalog IndexAir beams, Arlink 8000 . . . . . . . . . . . .24Align ® adjustable height workstationsBasesHand crank . . . . . . . . . . . . . . . . .35Motorized . . . . . . . . . . . . . . . . . .35Slide leg . . . . . . . . . . . . . . . . . . . .36Casters . . . . . . . . . . . . . . . . . . . . . .36Easy-Order combinations . . . . . . . .34Rear-mount Nexus frames . . . . . . .37Arlink ® 8000 workstationsBelow-worksurface accessories . . .27Build-your-own mobile workstations . .21Build-your-own workstations . . . . .20Easy-Order workstations . . . . . . . . .18ESD accessories . . . . . . . . . . . . . . . .27Flow racks . . . . . . . . . . . . . . . . . . . .29Lighting accessories . . . . . . . . . . . .23Pivoting accessories . . . . . . . . . . . .28Progressive assembly systems . . . .30Shelves . . . . . . . . . . . . . . . . . . . . . .22Tool storage accessories . . . . . . . . .26Trim . . . . . . . . . . . . . . . . . . . . . . . . .16Utility accessories . . . . . . . . . . . . . .24Utility and parts carts . . . . . . . . . . .30Worksurfaces . . . . . . . . . . . . . . . . .19Back stopsArlink 8000 . . . . . . . . . . . . . . . . . . .22Industrial . . . . . . . . . . . . . . . . . . . . .58Nexus . . . . . . . . . . . . . . . . . . . . . . .80Technical electronic . . . . . . . . . . . .44Bases, AlignHand crank . . . . . . . . . . . . . . . . . . .35Motorized . . . . . . . . . . . . . . . . . . . .35Slide leg . . . . . . . . . . . . . . . . . . . . .36Bin racks and containersArlink 8000 . . . . . . . . . . . . . . . . . . .28Nexus . . . . . . . . . . . . . . . . . . . . . . .82Cabinet pedestalsMP width . . . . . . . . . . . . . . . . . .66-71NW (narrow width) . . . . . . . . . .60-65CastersAlign . . . . . . . . . . . . . . . . . . . . . . . .36Nexus flow rack . . . . . . . . . . . . . . .97Nexus mobile trolley . . . . . . . . . . . .93Technical electronic workstations . .43Chairs . . . . . . . . . . . . . . . . . . . . . . . . .98CPU holderAlign, technical elec., industrial . . .37Arlink 8000 . . . . . . . . . . . . . . . . . . .27Data beams, Arlink 8000 . . . . . . . . . .24Definite Positioning System ® . . . . . . .16Document holdersArlink 8000 . . . . . . . . . . . . . . . . . . .28Nexus . . . . . . . . . . . . . . . . . . . . . . .82Easy-Order combinationsAlign adjustable height workstations . .34Arlink 8000 workstations . . . . . . . .18Industrial mobile workbenches .54-55Industrial workbenches . . . . . . .52-53MP cabinets . . . . . . . . . . . . . . . .68-69MP drawer interior sets . . . . . . . . .71MP mobile cabinets . . . . . . . . . . . .70Nexus accessory systems . . . . . .84-85Easy-Order combinations (continued)Nexus flow racks . . . . . . . . . . . . . .97Nexus packing benches . . . . . . .90-91Nexus stands . . . . . . . . . . . . . . . . .94Nexus trolleys . . . . . . . . . . . . . . . . .95NW cabinets . . . . . . . . . . . . . . .62-63NW drawer interior sets . . . . . . . . .65NW mobile cabinets . . . . . . . . . . . .64Technical electronic workstations . .40-41End stopsIndustrial . . . . . . . . . . . . . . . . . . . . .58Technical electronic . . . . . . . . . . . .44ESD accessoriesAlign, technical elec., industrial . . .43Arlink 8000 . . . . . . . . . . . . . . . . . . .27Flow racksArlink 8000 . . . . . . . . . . . . . . . . . . .29Nexus . . . . . . . . . . . . . . . . . . . . . . .97FootrestsAlign, technical elec., industrial . . .37Arlink 8000 . . . . . . . . . . . . . . . . . . .27Hanging cabinetsAlign, technical elec., industrial . . .36Arlink 8000 . . . . . . . . . . . . . . . . . . .25Hanging drawers, Arlink 8000 . . . . . .25Industrial workbenchesAbove-worksurface accessories . . .58Below-worksurface accessories . . .57Bottom shelves . . . . . . . . . . . . . . . .57Easy-Order combinations . . . . .52-53Easy-Order mobile combinations . .54-55Legs . . . . . . . . . . . . . . . . . . . . . . . . .57Privacy panels . . . . . . . . . . . . . . . . .57Stringers, foot rests . . . . . . . . . . . . .57Worksurfaces . . . . . . . . . . . . . . . . .56Keyboard holderAlign, technical elec., industrial . . .37Arlink 8000 . . . . . . . . . . . . . . . . . . .27LegsLista Legs, industrial . . . . . . . . . . . .57Lista mobile legs, industrial . . . . . .57Mobile panel legs, industrial . . . . .57Panel legs, industrial . . . . . . . . . . . .57Technical electronic . . . . . . . . . . . .43Technical electronic leg extenders .43Technical electronic mobile legs . . .43Technical electronic panel legs . . . .43LightsOverhead, Arlink 8000 . . . . . . . . . .23Overhead, Nexus . . . . . . . . . . . . . .78Undershelf . . . . . . . . . . . . . . . . . . .78Material transfer worksurfaces . .19, 42Monitor arms and shelvesArlink 8000 . . . . . . . . . . . . . . . . . . .28Nexus . . . . . . . . . . . . . . . . . . . . . . .82MP width cabinets . . . . . . . . . . . .66-71Bases . . . . . . . . . . . . . . . . . . . . . . . .67Drawers . . . . . . . . . . . . . . . . . . . . .67Easy-Order combinations . . . . .68-69Easy-Order drawer interior sets . . .71Easy-Order mobile combinations . .70Housings . . . . . . . . . . . . . . . . . . . . .67Nexus flow racksSee flow racks, NexusNexus packing benchesSee packing benches, NexusNexus systemBack stops . . . . . . . . . . . . . . . . . . . .80Easy-Order combinations . . . . .84-85Lighting accessories . . . . . . . . . . . .78Overhead cabinets . . . . . . . . . . . . .81Panels . . . . . . . . . . . . . . . . . . . . . . .83Pivoting accessories . . . . . . . . . . . .82Plastic box rails . . . . . . . . . . . . . . . .80Power accessories . . . . . . . . . . . . . .79Rear-mount frames (for Align) . . . .37Shelves . . . . . . . . . . . . . . . . . . . . . .77Surface-mount frames . . . . . . . . . .76Tool rails . . . . . . . . . . . . . . . . . . . . .79NW (narrow width) cabinets . . . . .60-65Bases . . . . . . . . . . . . . . . . . . . . . . . .61Drawers . . . . . . . . . . . . . . . . . . . . .61Easy-Order combinations . . . . .62-63Easy-Order drawer interior sets . . .65Easy-Order mobile combinations . .64Housings . . . . . . . . . . . . . . . . . . . . .61Overhead cabinetsArlink 8000 . . . . . . . . . . . . . . . . . . .25Nexus . . . . . . . . . . . . . . . . . . . . . . .81Packing benches, NexusEasy-Order combinations . . . . .90-91Leg inserts . . . . . . . . . . . . . . . . . . . .88Roll holders . . . . . . . . . . . . . . . .88-89Shelves . . . . . . . . . . . . . . . . . . .88-89Wire dividers . . . . . . . . . . . . . . .88-89PanelsLouvered, Arlink 8000 . . . . . . . . . .25Louvered, Nexus . . . . . . . . . . . . . . .83Markerboard/tackboard, Arlink 8000 . . .25Markerboard/tackboard, Nexus . . .83Modesty, Arlink 8000 . . . . . . . . . . .25Pegboard, Arlink 8000 . . . . . . . . . .25Pegboard, Nexus . . . . . . . . . . . . . . .83Solid steel, Nexus . . . . . . . . . . . . . .83Parts bin railsArlink 8000 . . . . . . . . . . . . . . . . . . .26Nexus . . . . . . . . . . . . . . . . . . . . . . .80Pivoting accessoriesArlink 8000 . . . . . . . . . . . . . . . . . . .28Nexus . . . . . . . . . . . . . . . . . . . . . . .82Power beams and stripsArlink 8000 . . . . . . . . . . . . . . . . . . .24Nexus . . . . . . . . . . . . . . . . . . . . . . .79Privacy panels . . . . . . . . . . . . . . . .43, 57Progressive assembly systems . . . . . .30Seating . . . . . . . . . . . . . . . . . . . . . . . .98ShelvesAdjustable, Nexus . . . . . . . . . . . . . .77Adjustable riser, industrial . . . . . . .58Adjustable riser, technical electronic . .44Bottom, Align . . . . . . . . . . . . . . . . .37Bottom, industrial . . . . . . . . . . . . . .57Bottom, Nexus packing bench . . . .88Bottom, technical electronic . . . . . .43Flow rack, Arlink 8000 . . . . . . . . . .29Shelves (continued)Flow rack, Nexus . . . . . . . . . . . . . .97Instrument riser, technical electronic . .44Open wire, Arlink 8000 . . . . . . . . . .22Stationary riser . . . . . . . . . . . . . . . .58Steel, Arlink 8000 . . . . . . . . . . . . . .22Variable angle, (Arlink 8000 . . . . . .22Variable angle, Nexus . . . . . . . . . . .77StandsArlink 8000 . . . . . . . . . . . . . . . . . . .30Nexus . . . . . . . . . . . . . . . . . . . . . . .93Nexus Easy-Order combinations . . .94Nexus frames . . . . . . . . . . . . . . . . .93Nexus worksurfaces . . . . . . . . . . . .93Static dissipative accessoriesAlign, technical elec., industrial . . .43Arlink 8000 . . . . . . . . . . . . . . . . . . .27Stringers, foot rests . . . . . . . . . . .43, 57Technical electronic workstationsAbove-worksurface accessories . . .44Below-worksurface accessories . . .43Bottom shelves . . . . . . . . . . . . . . . .43Easy-Order combinations . . . . .40-41Legs . . . . . . . . . . . . . . . . . . . . . . . . .43Privacy panels . . . . . . . . . . . . . . . . .43Stringers, foot rests . . . . . . . . . . . . .43Top support rails . . . . . . . . . . . . . . .43Worksurfaces . . . . . . . . . . . . . . . . .42Tool rails, Nexus . . . . . . . . . . . . . . . . .79Tool trolleys, Arlink 8000 . . . . . . . . . .26Top support rails . . . . . . . . . . . . . . . . .43TrolleysArlink 8000 . . . . . . . . . . . . . . . . . . .30Nexus . . . . . . . . . . . . . . . . . . . . . . .93Nexus Easy-Order combinations . . .95Nexus frames . . . . . . . . . . . . . . . . .93Nexus frames, mobile . . . . . . . . . . .93Nexus worksurfaces . . . . . . . . . . . .93Utility and parts carts, Arlink 8000 . . .30Vertical Space Integrator System . . . .31VSI accessory system . . . . . . . . . . . . .31Wire holders and guides, Arlink 8000 . . .26WorksurfacesAlign, technical electronic . . . . . . . .42Arlink 8000 . . . . . . . . . . . . . . . . . . .19Butcher blockAlign, technical electronic . . . . . .42Industrial . . . . . . . . . . . . . . . . . . .56Nexus stands and trolleys . . . . . .93Galvanized steel over wood . . . . . .56Lista Top . . . . . . . . . . . . . . . . . . . . .56Phenolic resin (Align, technical electronic)42Plastic laminateAlign, technical electronic . . . . . .42Arlink 8000 . . . . . . . . . . . . . . . . .19Industrial . . . . . . . . . . . . . . . . . . .56Nexus flow rack . . . . . . . . . . . . . .97Nexus stands and trolleys . . . . . .93Stainless steel over wood . . . . . . . .56Static dissipativeAlign, technical electronic . . . . . .42Arlink 8000 . . . . . . . . . . . . . . . . .1999

Lista ColorsCODE COLOR CODE COLORBE Beige BB* Bright BlueLista International headquarters and manufacturing facility in Holliston,MA, USA. Lista International also manufactures inBurlington, ON, Canada.CODE COLOR CODE COLORBK* Black CB Classic BlueFor information about Lista’s comprehensive line ofstorage cabinets, Storage Wall ® systems and otherstorage and workspace solutions, ask for our GeneralStorage Catalog.CODE COLOR CODE COLORGR Dark Gray GG GreenRepresented byCODE COLOR CODE COLORNR Red FW WhiteLista and Arlink ® 8000 ColorsCODE COLOR CODE COLORLG* Light Gray SN Sand* Available with ESD properties. To specifyESD paint, add prefix “ESD” to paint partnumber. For ESD paint specifications, contactLista Customer Service. ESD paint not availablefor Arlink ® 8000 products.Color differences exist between color samplesand actual finishes. Please contact yourLista representative for accurate color matching.Custom colors are available and will bequoted on request.Lista International Corporation106 Lowland StreetHolliston, MA 01746-2094USATelephone: (508) 429-1350Toll-Free: (800) 722-3020Fax: (508) 626-0353Internet: www.listaintl.comE-mail: sales@listaintl.comISO 9001 CertifiedProduct specifications are subject to changewithout notice and are those in effect at timeof shipment.©2008 Lista International Corporation Printed in U.S.A.04-08 125MLista ® , Making Workspace Work ® , Align ® , Arlink ® , Definite PositioningSystem ® , PrevenTip ® and Storage Wall ® are registeredtrademarks of Lista International Corporation.